Amplifiers, Pre-amps, Equalisers, Mixers & Gadgets

Amplifiers, Pre-amps, Equalisers, Mixers & Gadgets

Featured Products



Page of 2

2 Way Stereo Speaker Selector 100 Watts (2x50W)

AD-SPK21

2 Way Speaker Selector Switch in Metal Enclosure

This unit allows 2 pairs (each stereo) of speakers to be driven by a single stereo amplifier. Simply connect the output of an audio amplifier and 2 pairs of speakers to the switcher and you can safely play on either pair or both pairs at the same time. Each pair of speaker can be individually switched on or off via 2 rocker switches. Each speaker is connected by trigger terminals.
 
Spring trigger terminals
Heavy duty Rocker Switches
100 Watts max (50w per Channel)
 Dimensions:  175 x102 x 70mm

£15.50

(inc VAT £18.60)
Quantity

8 Way Stereo Speaker Selector 100W Per Channel

SSW8

8 Way Superior Metal Loudspeaker Switch 100W Per Channel

This switcher unit allows the distribution of a stereo amplifier. Simply connect the output of an audio amplifier to this unit and the output can then be distributed to up to eight different stereo speaker sets in eight different locations. Each speaker set can be individually activated via the push buttons on the front of the box. Ideally suited for buildings where an independent sound control is required for different rooms or zones.
 
  • Enables eight pairs of speakers to be connected to a single stereo amplifier
  • Heavy duty push-buttons
  • Built-in overload protection
  • Spring clip terminals
  • Designed for 4-16 ohms speakers
 
Wiring Gauge 14 to 22 gauge
Input 1 x stereo
Output 8 x stereo
Power per channel     100W max.
Dimensions     432 x 125 x 55mm
Weight 2.08kg
 

£46.50

(inc VAT £55.80)
Quantity

adastra A2 Stereo PA Amplifier 2 x 200W with 2 Microphone & Stereo Inputs, Bluetooth, FM & Remote Control

A2B

adastra A2 Stereo PA Amplifier 2 x 200W

Fully featured stereo amplifier with mixer section for 2 microphones and a stereo audio source.

  • Inbuilt media player section offers playback of mp3 audio tracks from USB drive or SD card .
  • Bluetooth receiver and FM radio tuner.
  • A rotary switch selects between 2 rear stereo inputs, a front 3.5mm stereo input or the built-in media player.
  • Speaker connections on the rear panel are via 4mm binding posts.
  • Drives up to 2 x 8 Ohm speakers per channel at 2 x 200W.
  • Designed to offer installers a flexible solution for PA and music playback in bars, restaurants and function rooms.
  • Media player with USB/SD playback
  • FM radio tuner with external aerial connection
  • Bluetooth receiver

 

Specification

Power supply 230Vac, 50Hz (IEC)

Fuse F5A, 250V

Output power rms @ 4 Ohms 2 x 200W

Output power rms @ 8 Ohms 2 x 100W

Amplifier : Class D

Frequency response 20Hz - 20kHz

Microphone inputs 2 x 6.3mm jack

Line inputs Line 1: L+R (6.3mm jack/RCA), Line 2: L+R (RCA)

Line Input sensitivity : 0.775Vrms

Auxiliary input 3.5mm stereo jack

Auxilliary input sensitivity : aux 0.480Vrms

Input impedance 20k Ohms (balanced), 10k Ohms (unbalanced)

Audio source USB/SD mp3 playback, FM tuner, BT receiver

Bluetooth version 2.3

Input controls Aux, Media, Line1, Line2, Mic1, Mic2, Talkover

Line output 2 x RCA

Speaker outputs 4mm binding posts (2 channels)

Antenna connection F type (FM tuner)

Output controls Source select, Bass, Treble, Ch1, Ch2

Dynamic range 92dB

THD +N  Less than 0.1%

Protection Thermal, over-current, over-voltage, short-circuit

Dimensions 482 x 240 x 88mm

Weight 5.21kg

 

£149.00

(inc VAT £178.80)
Quantity

adastra A4 Dual Stereo PA Amplifier 4 x 200W with 2 Microphone & Stereo Inputs, Bluetooth, FM & Remote Control

A4B

adastra A4 Dual Stereo PA Amplifier 4 x 200W

Fully featured PA amplifier with 2 independent stereo zone outputs.with mixer section for 2 microphones and a stereo audio source

  • Inbuilt media player section offers playback of mp3 audio tracks from USB drive or SD card .

  • Bluetooth receiver and FM radio tuner.

  • A rotary switch for each output zone selects the stereo playback audio from a choice of 2 rear stereo inputs, a front 3.5mm stereo input or the built-in media player. 

  •  2 pairs of speaker connections on the rear panel are via 4mm binding posts, 

  • Mic inputs 1 & 2 are live to both output zones at all times, driving up to 2 x 8 Ohm speakers on each of 4 channels up to 4 x 200W

  • Designed to offer installers a flexible solution for PA and music playback in bars, restaurants and function rooms.

  • Media player with USB/SD playback

  • FM radio tuner with external aerial connection

  • Bluetooth receiver

 

Specification

Power supply 230Vac, 50Hz (IEC)

Fuse F5A, 250V

Output power rms @ 4 Ohms 4 x 200W

Output power rms @ 8 Ohms 4 x 100W

Amplifier : Class D

Frequency response 20Hz - 20kHz

Microphone inputs 2 x 6.3mm jack

Line inputs Line 1: L+R (6.3mm jack/RCA), Line 2: L+R (RCA)

Line Input sensitivity : 0.775Vrms

Auxiliary input 3.5mm stereo jack

Auxilliary input sensitivity : aux 0.480Vrms

Input impedance 20k Ohms (balanced), 10k Ohms (unbalanced)

Audio source USB/SD mp3 playback, FM tuner, BT receiver

Bluetooth version 2.3

Input controls Aux, Media, Line1, Line2, Mic1, Mic2, Talkover

Line output 4 x RCA

Speaker outputs 4mm binding posts (4 channels)

Antenna connection F type (FM tuner)

Output controls 2 x source select, 2 xBass, 2 xTreble, Ch1, Ch2, Ch3, Ch4

Dynamic range 92dB

THD +N  Less than 0.1%

Protection Thermal, over-current, over-voltage, short-circuit

Dimensions 482 x 240 x 88mm

Weight 5.98kg

 

£187.00

(inc VAT £224.40)
Quantity

adastra A6 Triple Stereo PA Amplifier 6 x 200W with 2 Microphone & Stereo Inputs, Bluetooth, FM & Remote Control

A6B

adastra A6 Triple Stereo PA Amplifier 6 x 200W

Fully featured PA amplifier with 3 independent stereo zone outputs.with mixer section for 2 microphones and a stereo audio source

  • Inbuilt media player section offers playback of mp3 audio tracks from USB drive or SD card .
  • Bluetooth receiver and FM radio tuner.
  • A rotary switch for each output zone selects the stereo playback audio from a choice of 2 rear stereo inputs, a front 3.5mm stereo input or the built-in media player. 
  •  3 pairs of speaker connections on the rear panel are via screw terminal connections, 
  • Mic inputs 1 & 2 are live to both output zones at all times, driving up to 2 x 8 Ohm speakers on each of 6 channels up to 6 x 200W
  • Designed to offer installers a flexible solution for PA and music playback in bars, restaurants and function rooms.
  • Media player with USB/SD playback
  • FM radio tuner with external aerial connection
  • Bluetooth receiver

 

Specification

Power supply 230Vac, 50Hz (IEC)

Fuse F5A, 250V

Output power rms @ 4 Ohms 6 x 200W

Output power rms @ 8 Ohms 6 x 100W

Amplifier : Class D

Frequency response 20Hz - 20kHz

Microphone inputs 2 x 6.3mm jack

Line inputs Line 1: L+R (6.3mm jack/RCA), Line 2: L+R (RCA)

Line Input sensitivity : 0.775Vrms

Auxiliary input 3.5mm stereo jack

Auxilliary input sensitivity : aux 0.480Vrms

Input impedance 20k Ohms (balanced), 10k Ohms (unbalanced)

Audio source USB/SD mp3 playback, FM tuner, BT receiver

Bluetooth version 2.3

Input controls Aux, Media, Line1, Line2, Mic1, Mic2, Talkover

Line output 4 x RCA

Speaker outputs screw terminal (6 channels)

Antenna connection F type (FM tuner)

Output controls 3 x source select, 3 xBass, 3 xTreble, Ch1, Ch2, Ch3, Ch4, Ch5, Ch6

Dynamic range 92dB

THD +N  Less than 0.1%

Protection Thermal, over-current, over-voltage, short-circuit

Dimensions 482 x 300 x 88mm

Weight 8.26kg

 

£235.00

(inc VAT £282.00)
Quantity

adastra A8 Quad Stereo PA Amplifier 8 x 200W with 2 Microphone & Stereo Inputs, Bluetooth, FM & Remote Control

A8B

adastra A8 Quad Stereo PA Amplifier 8 x 200W

Fully featured PA amplifier with 4 independent stereo zone outputs.with mixer section for 2 microphones and a stereo audio source

  • Inbuilt media player section offers playback of mp3 audio tracks from USB drive or SD card .
  • Bluetooth receiver and FM radio tuner.
  • A rotary switch for each output zone selects the stereo playback audio from a choice of 2 rear stereo inputs, a front 3.5mm stereo input or the built-in media player. 
  •  4 pairs of speaker connections on the rear panel are via screw terminal connections, 
  • Mic inputs 1 & 2 are live to both output zones at all times, driving up to 2 x 8 Ohm speakers on each of 8 channels up to 8 x 200W
  • Designed to offer installers a flexible solution for PA and music playback in bars, restaurants and function rooms.
  • Media player with USB/SD playback
  • FM radio tuner with external aerial connection
  • Bluetooth receiver

 

Specification

Power supply 230Vac, 50Hz (IEC)

Fuse F5A, 250V

Output power rms @ 4 Ohms 8 x 200W

Output power rms @ 8 Ohms 8 x 100W

Amplifier : Class D

Frequency response 20Hz - 20kHz

Microphone inputs 2 x 6.3mm jack

Line inputs Line 1: L+R (6.3mm jack/RCA), Line 2: L+R (RCA)

Line Input sensitivity : 0.775Vrms

Auxiliary input 3.5mm stereo jack

Auxilliary input sensitivity : aux 0.480Vrms

Input impedance 20k Ohms (balanced), 10k Ohms (unbalanced)

Audio source USB/SD mp3 playback, FM tuner, BT receiver

Bluetooth version 2.3

Input controls Aux, Media, Line1, Line2, Mic1, Mic2, Talkover

Line output 8 x RCA

Speaker outputs screw terminal (6 channels)

Antenna connection F type (FM tuner)

Output controls 4 x source select, 4 xBass, 4 xTreble, Ch1, Ch2, Ch3, Ch4, Ch5, Ch6, Ch7, Ch8

Dynamic range 92dB

THD +N  Less than 0.1%

Protection Thermal, over-current, over-voltage, short-circuit

Dimensions 482 x 300 x 88mm

Weight 8.96kg

 

£285.00

(inc VAT £342.00)
Quantity

Adastra In-wall Bluetooth Stereo Amplifier 2 x 30W

IWA230B

Adastra 2 x 30 Watt In-Wall Stereo Amplifier with Bluetooth with Power Supply and Speaker Cable

2 Way 30W Stereo amplifier for background music and public address in a small housing for installation into cavity walls and ceilings.

Class-D amplifier for clean and efficient sound at minimal heat dissipation.

Internal digital switch-mode power section, with easy mains connection.

Bluetooth enables wireless streaming of audio from a smart phone, tablets and other devices.

3.5mm Aux and optical inputs,

Discreet and trouble-free installation without any need for table-top or cabinet installation, these amplifiers can be combined with many different speaker types to provide the ideal sound system for any small to medium space or deployed in numbers to create a wide area sound installation.

  • Fig.8 mains power input
  • Bluetooth on/off defeat switch
  • Optical digital audio input
  • 3.5mm stereo Aux input and output
  • Onboard master volume control
  • Bluetooth with unique serial ID

Power supply:100-240Vac, 50/60Hz (fig.8)

Bluetooth version4.0

L-/L+/R-/R+ screw terminals

Impedance: 4 Ohms & higher per output

Line input: 3.5mm stereo aux & optical digital audio

Line output: 3.5mm stereo jack

Dimensions:122 x 89 x 33mm

Weight: 150g

£49.50

(inc VAT £59.40)
Quantity

Bluetooth Audio Transmitter and Receiver 2 in 1

BTTR2

Bluetooth Audio Transmitter & Receiver with Built in Battery

An amazing compact Bluetooth device that opens a new world of wireless audio enjoyment both at home or on the move.

 

Simply connect using the audio cable provided to your TV, projector or other audio device and stream wirelessly to Bluetooth headphones, speakers or soundbars.

 

Alternatively connect to a set of headphones, amplifier or in-car entertainment system and you can pair with your smartphone, tablet or other Bluetooth devices.

 

With Multi-point support for shared listening, a  33 feet -10 metre transmission range and in-built rechargeable battery providing up to 8 hours playback from a single charge. Your perfect Bluetooth partner!

 

Features:

  •  Easy Pair System
  •  3.5mm Stereo Connection
  •  LED indicator for power and connection
  •  10m Bluetoothe Range
  •  Use as a transmitter for up to 8 hours
  •  Use as a receiver for up to 6 hours  
£24.50

£20.50

(inc VAT £24.60) 16% Off
Quantity

Bluetooth FM Audio Transmitter for Car Radios

BTFM

Bluetooth FM Audio Transmitter 

A small and very useful Bluetooth to FM radio transmiter that can equip any car with an FM radio with Bluetooth capabilities. Simply plug it in your cigar lighter socket, tune your radio to the frequency displayed on the screen and connect your phone via Bluetooth and you can play your favourite tunes without the need to replace the stereo. You can also play music from a USB flash drive using the second USB-A socket.

It also features a USB-A socket for charging on the go and a USB-C socket for fast charging (USB cables not included). The built-in microphone allows you to safely make handsfree calls.

Specifications:
Transmitter frequency range: 87.5 - 108MHz
Transmitter range: 5-10 metres
Working voltage: 12-24V DC
USB Output: 20W Max.
 

£6.50

(inc VAT £7.80)
Quantity

Citronic D1000 2 x 500W RMS Stereo Class-D Power Amplifier

D1000

Citronic D1000 500W+500W RMS 19" rackmount 1U Power Amplifier 

Using Class-D technology this amplifier can deliver a true 1000W RMS (500W + 500W stereo or 1000W mono) while keeping the size and weight to a minimum. 

 

Balanced inputs via XLR sockets with loop outputs, speaker outputs on 2 SPK connectors for stereo or 1 SPK for bridged mode. Switchable ground lift, bridge mode and input sensitivity.

 

 

Specification

 

Power supply: 240Vac, 50Hz (IEC)

Output Power: 2 x 500W @ 4Ω

                        2 x 300W @ 8Ω 

                        1 x 1000W @ 8Ω                       

Controls: Level channel 1, level channel 2, ground, mode, sensitivity

Input Level: 0.775V - 1.0V - 1.44V

Frequency response: 20Hz - 20kHz

Total harmonic distortion: 0.2%

Input Impedance: 20KΩ balanced or 10KΩ unbalanced

Damping factor: Less than 700

Protection: Short/open-circuit, overload, D.C. and thermal

Size: 482 x 245 x 44 mm (19" 1U)

Weight: 4.2KG

£255.00

(inc VAT £306.00)
Quantity

Citronic D600 2 x 300W RMS Stereo Class-D Power Amplifier

D600

Citronic D1000 300W+300W RMS 19" rack-mount 1U Power Amplifier 

Using Class-D technology this amplifier can deliver a true 600W RMS (300W + 300W stereo or 600W mono) while keeping the size and weight to a minimum. 

 

Balanced inputs via XLR sockets with loop outputs, speaker outputs on 2 SPK connectors for stereo or 1 SPK for bridged mode. Switchable ground lift, bridge mode and input sensitivity.

 

 

Specification

 

Power supply: 240Vac, 50Hz (IEC)

Output Power: 2 x 300W @ 4Ω

                        2 x 150W @ 8Ω 

                        1 x 600W @ 8Ω                       

Controls: Level channel 1, level channel 2, ground, mode, sensitivity

Input Level: 0.775V - 1.0V - 1.44V

Frequency response: 20Hz - 20kHz

Total harmonic distortion: 0.2%

Input Impedance: 20KΩ balanced or 10KΩ unbalanced

Damping factor: Less than 700

Protection: Short/open-circuit, overload, D.C. and thermal

Size: 482 x 245 x 44 mm (19" 1U)

Weight: 4.2KG

£225.00

(inc VAT £270.00)
Quantity

Citronic PLX2000 2 x 1000W RMS Stereo Amplifier

PLX2000

citronic PLX2000 Class H 1000W+1000W RMS in to 2 ohms 19" Rackmount High Power Amplifier 

 

Dual Fan cooling and Output Protection. Uses Class H for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors

 

Bridge mode for high power mono operation

Output stable down to 2 Ohms

Removable handles for low profile install

Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.

 

Bridge mode for high power mono operation

Removable handles for low profile install

Switchable clip limiter

     Power supply:  230Vac

Controls: Level channel 1, level channel 2, ground, mode, clip limiter

Input impedance: 20k ohms

Frequency response: 5Hz - 50kHz

Total harmonic distortion: 0.05%

Slew rate: 40V/us

Damping factor:  Less than 400

Protection: Short-circuit, overload, D.C. and thermal

Dimensions482 x 453 x 88mm (2U)

 

Specification:

Power rms @ 2 Ohms                                                               2 x 1000W                     

 

Power rms @ 4 Ohms                                                               2 x 700W                       

 

Power rms @ 8 Ohms                                                               2 x 400W                                                               

 

Power rms bridge @ 4 Ohms                                                   1700W                           

 

Power rms bridge @ 8 Ohms                                                   1250W                           

 

Weight   22.5kg

£355.00

(inc VAT £426.00)
Quantity

Citronic PLX2800 2 x 1400W RMS Stereo Amplifier

PLX2800

Citronic PLX2800 Class H 1400W+1400W RMS in to 2 ohms 19" Rackmount High Power Amplifier 

Dual Fan cooling and Output Protection. Class H for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors

 

Bridge mode for high power mono operation

Output stable down to 2 Ohms

Removable handles for low profile install

Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.

 

Bridge mode for high power mono operation

Removable handles for low profile install

Switchable clip limiter

Powered by:  230Vac

Controls: Level channel 1, level channel 2, ground, mode, clip limiter

Input impedance: 20k ohms

Frequency response: 5Hz - 50kHz

Total harmonic distortion: 0.05%

Slew rate: 40V/us

Damping factor:  Less than 400

Protection: Short-circuit, overload, D.C. and thermal

Dimensions 482 x 453 x 88mm (2U)

 

Specification:

Power rms @ 2 Ohms                                                            2 x 1400W                     

Power rms @ 4 Ohms                                                            2 x 1050W                       

Power rms @ 8 Ohms                                                            2 x 600W                                                               

Power rms bridge @ 4 Ohms                                                 2300W                           

Power rms bridge @ 8 Ohms                                                 1750W                           

Weight   25kg

 

£380.00

(inc VAT £456.00)
Quantity

Citronic PLX3600 2 x 1800W RMS Stereo Amplifier

PLX3600

Citronic PLX3600 Class H 1800W+1800W RMS in to 2 ohms 19" Rackmount High Power Amplifier 

 

With Dual Fan cooling and Output Protection. Uses Class H for safe, reliable power delivery. Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors

 

Bridge mode for high power mono operation

Output stable down to 2 Ohms

Removable handles for low profile install

Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.

 

Bridge mode for high power mono operation

Removable handles for low profile install

Switchable clip limiter

Powered by:  230Vac

Controls: Level channel 1, level channel 2, ground, mode, clip limiter

Input impedance: 20k ohms

Frequency response: 5Hz - 50kHz

Total harmonic distortion: 0.05%

Slew rate: 40V/us

Damping factor: Less than 400

Protection: Short-circuit, overload, D.C. and thermal

imensions482 x 453 x 88mm (2U)

 

Specification:

Power rms @ 2 Ohms                                                               2 x 1800W                     

Power rms @ 4 Ohms                                                               2 x 1350W                       

Power rms @ 8 Ohms                                                               2 x 800W                                                               

Power rms bridge @ 4 Ohms                                                   2900W                           

Power rms bridge @ 8 Ohms                                                   2300W                           

Weight   25kg

 

£535.00

(inc VAT £642.00)
Quantity

Citronic PPX300 2 x 150W RMS Stereo Amplifier

PPX300

Citronic PPX300 150W+150W RMS 19" Rackmount 2U Power Amplifier 

With fan cooling and Output Protection

 

Balanced inputs via 6.3mm jack or XLR sockets, speaker outputs on 2 SPK connectors or 4mm binding posts. Switchable ground lift, bridge mode and clip limiter.

 

Bridge mode for high power mono operation

Removable handles for low profile install

Switchable clip limiter

 

Specification

 

Power supply: 240Vac, 50Hz (IEC)

Controls: Level channel 1, level channel 2, ground, mode, clip limiter

Input impedance: 20k ohms

Frequency response: 5Hz - 50kHz

Total harmonic distortion: 0.05%

Slew rate: 40V/us

Damping factor: less than 400

Protection: Short-circuit, overload, DC and thermal

£175.00

(inc VAT £210.00)
Quantity

Digital to Analogue Converter for Audio

DAC7

D-A Convereter - Digital to Analogue,Optical Toslink or Coaxial Digital In & 2 RCA Phonos & 3.5mm Out

Connects a digital audio signal to an audio amplifier or AV receiver, etc if there are no digital audio inputs

Supports sampling rates of 32, 44.1, 48 and 96 KHz

Screened Aluminium Housing

Easy to use

 

Technical Data

Input 1 RCA female (digital audio, S/PDIF)

Input 2 Toslink Optical Inputs

2 Phono RCA female outputs (audio left & right) and 3.5mm Stereo Socket 

USB power Cable Supplied (Requires USB Power)

Length 62 mm Width 45 mm Height 20 mm

Weight 65 g
£15.00

£13.75

(inc VAT £16.50) 8% Off
Quantity

Internet Streaming Amplifier with Smartphone Control

S260WIFI

Internet Streaming Amplifier
 

Class-D miniature amplifier delivering up to 2 x 60W output with Bluetooth and WiFi streaming capability. Controlled from an Android or iOS smart phone, the S260-WIFI is compatible with freely available apps to stream music and podcasts directly from a WiFi network. Embedded internet radio offers high quality digital audio from almost any online radio station or podcast available worldwide.

Subscription services can store online playlists which can be cast directly from the internet without requiring the smart phone to be connected to the network. Wireless streaming of tracks and playlists stored on the smart phone can be sent from within the app or directly via Bluetooth to the amplifier. A line input is selectable for connection to a TV, CD, DVD or other playback device if required.

In addition, the S260-WIFI has inputs for USB and microSD card for playback of stored tracks.

Provides a versatile "hands off" background music solution for continuous playback of music from internet services or a choice of other sources for bars, cafes, restaurants, reception areas and house parties.

 

  • 2 x 60W class-D amplifier
  • WiFi streaming with smart phone control
  • Free WiiM Legacy Player app for Android or iOS
  • Bluetooth receiver
  • USB/microSD player
  • Stereo aux line input

Power supply: 24Vdc, 3A (in-line adaptor included)

Amplifier construction: Class-D

Output power rms: @ 4 Ohms2 x 60W

Output power rms: @ 8 Ohms2 x 30W

Load impedance: 4 or 8 Ohms

Speaker outputs: L+R binding posts

Processor: MediaTek MT7688 580 MHz

Sampling format: 192kHz, 24-bit max.

Wireless connection: 802.11b/g/n WiFi standard (up to 300Mbps)

Bluetooth version: v5.0

Audio source: WiFi, Bluetooth, USB/microSD, Line input (RCA)

Dimensions: 150 x 122 x 44mm

Weight: 494g

£135.00

(inc VAT £162.00)
Quantity

Miniature 20W + 20W Stereo Amplifier with Amazing Extra Bass

AMP40

Amazingly Powerful Mini Stereo Amplifier with Maxi Bass: 20W+20W rms. Price Includes Free 12V Mains Power Supply
 

A full and powerful sound with hifi quality & full frequency response, this little amplifier has Bass Treble & Volume controls. Measures only 140 x 70 x 40mm.

Comes complete with power-supply for mains connection or can be driven from 12VDC (ie Home or Car)

An ideal amp for anywhere, fitting neatly into small spaces at amazing power and clarity. Can be located anywhere (houses, offices, cars, vans, boats etc.)

Specification:

  • Output Power: 20W + 20W rms
  • Size: 140mm x 100mm x 40mm
  • Power Supply: 12V 2A DC (included)
  • Input sensitivity: : 200mV
  • Input impedance: : 47k
  • Freq response: : 20Hz to 20kHz
  • Output impedance : 2 to 8 ohms
  • THD : <0.05%
  • Signal to noise ratio : >100db
  • RCA (phono) sockets & 3.5mm jack input

£28.00

(inc VAT £33.60)
Quantity

Miniature Class D HiFi 300W + 300W Stereo Amplifier with Bluetooth and Tone Control

AMP300

Amazingly Powerful Class D Stereo Amplifier: 300W+300W. Price Includes Free 36V Mains Power Supply
 

Using the high-efficiency TPA3255 IC, this little amplifier produces a crystal clear sound with almost no detectable distortion and noise at normal line-level input. Measures only 168mm x 114mm x 32mm.

Comes complete with low noise power-supply for mains connection or can be driven from 24-48VDC (i.e. Home or Car)

An ideal amp for anywhere, fitting neatly into small spaces at amazing power and clarity. Can be located anywhere (houses, offices, cars, vans, boats etc.)

This version has bass and treble control potentiometers, allowing for a more precise tone configuration. It also has an input selector switch that can cycle between Bluetooth input and RCA input. 

Specification:

  • Output Power: 300W + 300W @4Ω Load
  • Size: 168mm x 114mm x 32mm
  • THD: 0.002% @ Rl = 4Ω, 1W
  • Power Supply: 36V 6A DC (included)
  • Freq response: 20Hz to 20kHz (±1.5dB)
  • Output impedance: 4 to 8 ohms
  • Input: 2 x RCA (phono) sockets, Bluetooth 5.2
  • Output: 4mm binding posts, 3.5mm stereo socket 
£145.00

£125.00

(inc VAT £150.00) 14% Off
Quantity

Miniature Class D HiFi 50W + 50W Stereo Amplifier

AMP100

Amazingly Powerful Class D Stereo Amplifier: 50W+50W rms. Price Includes Free 15V Mains Power Supply
 

Using the high-efficiency TPA3116 IC, this little amplifier produces a crystal clear sound with almost no detectable distortion and noise at normal line-level input. Measures only 140mm x 100mm x 40mm.

Comes complete with low noise power-supply for mains connection or can be driven from 15-24VDC (i.e. Home or Car)

An ideal amp for anywhere, fitting neatly into small spaces at amazing power and clarity. Can be located anywhere (houses, offices, cars, vans, boats etc.)

Specification:

  • Output Power: 50W + 50W rms
  • Size: 140mm x 100mm x 40mm
  • THD + N: 0.1% @ f = 1kHz, 25W
  • Power Supply: 15V 5A DC (included)
  • Freq response: 20Hz to 20kHz
  • Output impedance: 4 to 8 ohms
  • Input: 2 x RCA (phono) sockets

£65.00

(inc VAT £78.00)
Quantity

Miniature Class D HiFi 80W + 80W Stereo Amplifier With Tone Control

AMP160

Amazingly Powerful Class D Stereo Amplifier: 80W+80W rms. Price Includes Free 15V Mains Power Supply
 

Using the high-efficiency TPA3116 IC, this little amplifier produces a crystal clear sound with almost no detectable distortion and noise at normal line-level input. Measures only 130mm x 90mm x 33mm.

Comes complete with low noise power-supply for mains connection or can be driven from 15-24VDC (i.e. Home or Car)

An ideal amp for anywhere, fitting neatly into small spaces at amazing power and clarity. Can be located anywhere (houses, offices, cars, vans, boats etc.)

This version has bass, mids and treble control potentiometers, allowing for a more precise tone configuration. It also has an input selector switch that can cycle between OFF, AUX input and RCA input. 

Specification:

  • Output Power: 80W + 80W rms
  • Size: 130mm x 90mm x 33mm
  • THD: 0.03% @ Rl = 4Ω, 1W
  • Power Supply: 15V 5A DC (included)
  • Freq response: 20Hz to 20kHz (±1.5dB)
  • Output impedance: 4 to 8 ohms
  • Input: 2 x RCA (phono) sockets, 1 x 3.5mm Stereo AUX

£75.00

(inc VAT £90.00)
Quantity

Professional 4 Way Stereo Speaker Selector up to 140 Watts

SW4P

4-Way Professional Speaker Selector with Protection Circuit

This metal switcher allows the distribution of a stereo amplifier. Simply connect the output of an amplifier to the box, this output can then be distributed to up to four different stereo speaker sets in four different locations. Each speaker pair can be individually activated via the push buttons on the front of the box.

 

  • Enables four pairs of speakers to be connected to a single stereo amplifier
  • Heavy duty push-buttons
  • Built-in overload protection
  • Designed for 4-16 ohms speakers
  • Trigger terminals
">">">">">">">">">">">">">">">">">); PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 0% 0.2em; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial"> http://avslgroup.com/com/grp/dots.gif); PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 0% 0.2em; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial"> http://avslgroup.com/com/grp/dots.gif); PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 0% 0.2em; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: left; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; WHITE-SPACE: nowrap; BACKGROUND-POSITION: 0% 0.2em; FLOAT: left; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; FONT-WEIGHT: bold; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
Wire Sizes
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: right; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 100% 0.2em; FLOAT: right; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
Up to 14 gauge
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: left; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; WHITE-SPACE: nowrap; BACKGROUND-POSITION: 0% 0.2em; FLOAT: left; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; FONT-WEIGHT: bold; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
Input
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: right; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 100% 0.2em; FLOAT: right; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
1 x stereo
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: left; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; WHITE-SPACE: nowrap; BACKGROUND-POSITION: 0% 0.2em; FLOAT: left; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; FONT-WEIGHT: bold; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
Output
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: right; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 100% 0.2em; FLOAT: right; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
4 x stereo
http://avslgroup.com/com/grp/dots.gif); PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 0% 0.2em; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial"> http://avslgroup.com/com/grp/dots.gif); PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 0% 0.2em; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial"> http://avslgroup.com/com/grp/dots.gif); PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 0% 0.2em; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: left; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; WHITE-SPACE: nowrap; BACKGROUND-POSITION: 0% 0.2em; FLOAT: left; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; FONT-WEIGHT: bold; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
Power per channel
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: right; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 100% 0.2em; FLOAT: right; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
140W max
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: left; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; WHITE-SPACE: nowrap; BACKGROUND-POSITION: 0% 0.2em; FLOAT: left; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; FONT-WEIGHT: bold; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
Dimensions
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: right; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 100% 0.2em; FLOAT: right; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
215 x 110 x 45mm
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: left; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; WHITE-SPACE: nowrap; BACKGROUND-POSITION: 0% 0.2em; FLOAT: left; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; FONT-WEIGHT: bold; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
Weight
http://avslgroup.com/com/grp/dots.gif); TEXT-ALIGN: right; PADDING-BOTTOM: 0px; LINE-HEIGHT: 1.33em; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING-LEFT: 0px; PADDING-RIGHT: 0px; FONT-FAMILY: inherit; BACKGROUND-POSITION: 100% 0.2em; FLOAT: right; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; FONT-SIZE: 10px; VERTICAL-ALIGN: baseline; BORDER-LEFT-WIDTH: 0px; PADDING-TOP: 0px; background-origin: initial; background-clip: initial">
1.2kg

 

£32.50

(inc VAT £39.00)
Quantity

qtx KAD2BT Digital Stereo Amplifier with Bluetooth

KAD2BT

qtx KAD2BT Digital Stereo Amplifier with Bluetooth - with Karaoke Functions

Compact digital amplifier with three selectable stereo inputs & two microphone inputs, delivering up to 55W max. per channel. 

Mic volume, tone and echo effects are adjustable through rotary controls. 

Master Volume, Treble and Bass Controls.

Featuring, Bluetooth connectivity and FM receiver.

Multi-functional amplifier suitable for both domestic and commercial use.

Efficient Class D digital amplifier

Bluetooth connectivity

Built-in media player with USB and SD card inputs and FM receiver

A high output power of 55W max. per side

3.5mm stereo line input on the front panel

2 phono RCA stereo line inputs

2 x 6.3mm microphone inputs

Spring clip speaker output terminals

Power supply 230Vac, 50Hz (IEC)

Output impedance 4 to 16 Ohms

Input sensitivity : Line 380mV

Input sensitivity : Mic (unbalanced)15mV

Output power : 8 Ohms 2 x 25W rms / 2 x 40W max. @ 1kHz 

Output power : 4 Ohms2 x 35Wrms/ 2 x 55Wmax. @ 1kHz 

Dimension 200x200x65mm

Weight 1.6kg

£59.00

(inc VAT £70.80)
Quantity

qtx Q480 Stereo 240Watt + 240Watt Power Amplifier with Very Low Distortion

Q480

qtx Q480 Stereo Power Amplifier with high output & low distortion

Stereo power amplifier with multiple inputs and outputs. Designed for accurate and reliable service for performers at venues

120W + 120W RMS per channel into (240W + 240W max)
Volume control for each channel
Fan Cooled
19" 2U Rack Mounting
Freq response: 20Hz - 20KHz
THD: less than 0.5%
Inputs: RCA (Phonos) & 6.3mm Jacks.
10K @ 775mV
Outputs: Binding Post/Speaker (NL4)
Min output load 4 ohms.
Dims: 482 x 300 x 88mm

£119.00

(inc VAT £142.80)
Quantity

qtx Q600 Stereo 300Watt + 300Watt Power Amplifier with Very Low Distortion

Q600

qtx Q600 Stereo Power Amplifier with high output & low distortion

Stereo power amplifier with multiple inputs and outputs. Designed for accurate and reliable service for performers at venues

150W + 150W RMS per channel into (300W + 300W max)
Volume control for each channel
Fan Cooled
19" 2U Rack Mounting
Freq response: 20Hz - 20KHz
THD: less than 0.5%
Inputs: RCA (Phonos) & 6.3mm Jacks.
10K @ 775mV
Outputs: Binding Post/Speaker (NL4)
Min output load 4 ohms.
Dims: 482 x 300 x 88mm

£125.00

(inc VAT £150.00)
Quantity

av:link 3 Way Stereo Input Extender Switcher with Phono Sockets (RCA)

INEX

av:link 3 way Stereo Input Extender

A useful little device, enabling connection of up to three extra stereo inputs to your hifi etc.

They are selected by front-panel push buttons.

Ideal for multiple sound sources such as tablets (inc iPads), Moblie Phones, DVDs, Record players, CD players, Cassettes, Tuners, mp3 etc.

Connections via nickel plated RCA phono sockets. No battery needed.

For 3.5mm jack plug to phono converter leads, please see our selection.

Channel separation 60dB @ 1kHz Crosstalk 70dB @ 1kHz

 

Input: 3 x 2 stereo RCA Phono

 

Output: 1 x 2 stereo RCA Phono

 

Dimensions: 45 x 134 x 86mm

£14.50

(inc VAT £17.40)
Quantity

Cassette Player Adaptor - Lsten to mp3 & CD etc through hifi of your old Stereo System

CAD

 

Cassette Adaptor

Allows any line level audio signal to be played through a cassette player, simply by inserting it into the cassette holder of any hifi or car stereo.
No power supply required - simply plug mp3 player, CD, smart device etc via a 3.5mm jack plug.
 
Especially suitable for hifi units that have no external input sockets.
 

£7.95

(inc VAT £9.54)
Quantity

Ground Loop Isolator for Interference Suppression with Phonos (RCA)

ZAD1

Stereo Ground Loop Isolator - Audio Noise Filter

For interference suppression of Car Audio, Hifi, CD players, Turntables, Computers etc.

Various Noise Problem Sources can be suppressed by inserting this device between phono plugs/socktes (RCA).

Gold Plated Contacts.

£8.50

(inc VAT £10.20)
Quantity

Citronic CEQ215 15 Band Graphic Equaliser -1U 19 inch Rack Mount

CEQ215

citronic CEQ215 DUAL 15 BAND GRAPHIC EQUALISER

The CEQ215 is a 19" rack mounted dual 15-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 25Hz to 16kHz for accurate audio spectrum control.

 

  • 2 x 15-band 2/3 octave ISO spacing
  • RF filtered servo-balanced inputs
  • Constant Q each band
  • Bypass switch for EQ comparison
  • Low-cut switch each channel
  • Gain control each channel
  • LED VU meters
  • 19" rackmount 1U

Power supply115/230Vac, 50/60Hz (IEC)

Frequency response 20Hz-20kHz

Input impedance : balanced40k Ohms

Input impedance : unbalanced20k Ohms

Output impedance : bal/unbal330 Ohms

Channel separation >50dB

Signal to noise ratio >102dB

THD0.005%

Dimensions 482 x 44 x 138mm

Weight 2.0kg

 

£89.00

(inc VAT £106.80)
Quantity

Citronic CEQ231 31 Band Graphic Equaliser - 2U 19 inch Rack Mount

CEQ231

CEQ231 DUAL 31 Band Graphic Equaliser

 

The CEQ231 is a 19" 2U rack mounted dual 31-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 20Hz to 20kHz for ultimate EQ control.

 

  • 2 x 31-band 1/3 octave ISO spacing
  • RF filtered servo-balanced inputs
  • Constant Q each band
  • Bypass switch for EQ comparison
  • Low-cut switch each channel
  • Gain control each channel
  • LED VU meters
  • 19" rackmount 2U

Power supply115/230Vac, 50/60Hz (IEC)

Frequency response20Hz-20kHz

Input impedance : balanced40k ohms

Input impedance : unbalanced20k ohms

Output impedance : bal/unbal330 ohms

Channel separation>50dB

Signal to noise ratio>102dB

THD0.005%

Dimensions482 x 88 x 139mm

Weight3.3kg

 

£145.00

(inc VAT £174.00)
Quantity
Page of 2