New Products

DPOX180H 180MHz Dual Channel Digital Phosphor Oscilloscope with Function Generator

The DPOX180H is a small but mighty portable digital phosphor oscilloscope (DPO) with a bandwidth of 180MHz and high sampling rate of 500MS/s. Fully featured with a 2.8" IPS digital fluorescent display, 3000mAh Li-ion batttery, 50000wfm/s waveform refresh rate and 20MHz DDS function generator. All the benefits of a modern digital storage oscilloscope combined with the added benefits of an analogue oscilloscope display.

Package Contents:

1 * DPOX180H Digital Phosphor Oscillograph
2 * Matching 200MHz Probe (1X & 10X)
1 * 5V2A Power Adapter
1 * USB Data Line
1 * User Manual (English and Chinese)

Specifications:

Number of channels 2
Analog bandwidth 180MHZ
Maximum sampling rate 500MSPS
Input coupling DC/AC
Rise time 2.5nS
Storage depth 120Kpts
Input impedance 1MΩ-18PF
Vertical sensitivity 5mV ~ 10V(1X)
Time base range 5nS ~ 50S
DC accuracy ±2%
Time accuracy ±0.01%
Measurement range 40mV ~ 80V(1X)
Digital phosphor technolog support
Color temperature display support
Zoom scaling time base support
20M hardware bandwidth limitation support
Adjustable automatic bandwidth limitation support
X-Y mode support
FFT support
Cursor measurement Frequency/Period/Amplitude
Trigger detection Digital trigger
Trigger mode Auto/Single/Normal
Trigger edge Rising/Falling
Roll mode support
Screenshot storage 90
Waveform storage 250 groups
Capture signal 500
Parameter measurement 12 kinds
Signal generator 14 standard function signals
Auto-adjustment support
Waveform manager support
Waveform output support
High-voltageburnout protection support
Screen size 2.8 inches
Screen resolution 320x240
Display technology IPS full view
Expansion interface USB transmission interface
Auto power-off 5minutes-2hours
Firmware upgrade support
Charging requirements 5V 2A
Battery capacityï 3000mAh
Standby time 3.5 hours at full charge
Dimensions 135mmx90mmx40mm

Flashing LED Christmas Tree Kit

The perfect Christmas decoration for the electronic enthusiast.This kit is ideal for beginners and professionals alike. Build your own Christmas tree complete with red, yellow and green LEDs the are driven by a transistor flashing circuit. 

 

Can be powered via the micro-USB socket (USB cable not included!) or via batteries (battery holder not included).

 

High Quality Universal Laptop (Notebook) Power Supply Adaptor with 9 Plugs 9.5-20VDC 60 Watts with USB Output

Output: 12, 15, 16, 18, 19, 20, 24V DC (adjustable) 

Voltages and Currents:

12-19V DC @ 4.5A
20-24 DC @ 5A

Selection of 10 different plugs to fit most laptops .

UK mains plug. Can operate from 100VAC to 240VAC 50/60Hz
Cable length 1m

Bright Yellow Straw Hat 5mm LED, Clear, 1000mcd

Vf: 2 - 2.2V 
Wavelength: 588 - 590nm

Bright Warm White Straw Hat 5mm LED, Clear, 1600mcd

Vf: 3 - 3.2V 
 

Bright Ultraviolet Straw Hat 5mm LED, Clear

Vf: 3 - 3.2V
Wavelength: 390nm 

Bright Red Straw Hat 5mm LED, Clear, 1000mcd

Vf: 2 - 2.2V 
Wavelength: 620 - 625nm

Bright Pink Straw Hat 5mm LED, Clear, 2500mcd

Vf: 2 - 2.2V 
Wavelength: 650 - 660nm

Bright Orange Straw Hat 5mm LED, Clear, 1000mcd

Vf: 2 - 2.2V
Wavelength: 605nm 

Bright Ice Blue Straw Hat 5mm LED, Clear

Vf: 2.7V 
Wavelength: 490nm

Bright Green Straw Hat 5mm LED, Clear, 2500mcd

Vf: 3 - 3.2V 
Wavelength: 515nm

Bright Cool White Straw Hat 5mm LED, Clear, 2500mcd

Vf: 3 - 3.2V 

 

Bright Blue Straw Hat 5mm LED, Clear, 2500mcd

Vf: 3 - 3.2V
Wavelength: 460nm 

Sturdy Dual Jack to Dual XLR Lead - 1.5 Metre Long

Conductor: 2 x 12 Strand 0.1mm diameter pure copper
Cable Outer Dimensions: 5mm (diameter) x 10mm

Sturdy Jack Plug to Male XLR Lead - 1.5 Metre Long

Conductor: 15 Strand 0.1mm diameter pure copper
Cable Outer Diameter: 6mm 

Lead joining 2 6.3mm (1/4") Jacks to 2 x 3 pin XLR Female Line Sockets (Latching) using High Quality Screened Cable 1.5M Long

A durable, high quality, shielded audio lead with pro quality, die-cast XLR female connectors and 6.3mm mono jack plugs, offering exceptional sound and reliability. Made with twinned high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.

• Length: 1.5m
• Cable diameter: Twin 5mmØ (5 x 10mm)
• Conductors: 2 x 12 strand, 0.1mmØ pure copper
• Connectors: 2 x female XLR, 2 x 6.3mm mono jack plug

Sturdy Jack Plug to Male XLR Lead - 12 Metres Long

Conductor: 15 Strand 0.1mm diameter pure copper
Cable Outer Diameter: 6mm 

Black Rocker Switch Double Pole Single Throw (DPST) on/off

6A @ 250VAC  

10A @ 125VAC

19.2 x 13mm cut out.

4mm tin-plated spade connectors

Rocker Switch Double Pole Single Throw (DPST) on/off with Green LED

6A @ 250VAC  

10A @ 125VAC

19.2mm x 13mm cut out.

4mm tin-plated spade connectors

Rocker Switch Double Pole Single Throw (DPST) on/off with Red LED

6A @ 250VAC  

10A @ 125VAC

19.2mm x 13mm cut out.

4mm tin-plated spade connectors

Sturdy Dual Jack to Dual XLR Lead - 3 Metre Long

Conductor: 2 x 12 Strand 0.1mm diameter pure copper
Cable Outer Dimensions: 5mm (diameter) x 10mm

Sturdy Jack Plug to Male XLR Lead - 3 Metres Long

Conductor: 15 Strand 0.1mm diameter pure copper
Cable Outer Diameter: 6mm 

Lead joining 6.3mm (1/4") Jacks to 2 x 3 pin XLR Female Line Sockets (Latching) using High Quality Screened Cable 3M Long

A durable, high quality, shielded audio lead with pro quality, die-cast XLR female connectors and 6.3mm mono jack plugs, offering exceptional sound and reliability. Made with twinned high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.

• Length: 3m
• Cable diameter: Twin 5mmØ (5 x 10mm)
• Conductors: 2 x 12 strand, 0.1mmØ pure copper
• Connectors: 2 x female XLR, 2 x 6.3mm mono jack plug

PCB Terminal Block. 3 way. They can be interconnected to form longer strips

Pitch: 5mm

Max Current 15A.

Max Voltage 300V

5W Guitar Valve Amplifier Kit - Fender 5F1 Champ Style   

  This is our take on the famous Fender Champ Guitar Amp from the 50s. It offers a beautifully rich, creamy sound with a lovely warm bass and mid response that you can only get from a valve amp. When we tested this kit for the first time it's sound surpassed all of our expectations and we are all super excited to share this experience with you. 

  Using a high voltage DC-DC boost converter instead of the conventional power transformer and rectifier valve, this amp kit is lighter, smaller and more cost effective without compromising on the performance. Since the boost converter requires only a 12V DC input, this amp can also be used on the go, and can even be powered by 12V batteries. Our design also includes a cathode bypass capacitor on the first triode gain stage to increase the gain, this is a common modification done to the original amp and we think this makes it sound better. If you want the original sound this capacitor can be omitted.

This amp comes with new old stock Soviet Reflektor 6П6С beam tetrode output valve and JJ ECC83 double-triode.

We recommend using a 12V power supply that can supply at least 5A like this one BSM1250. 

The following components are included in this kit:

• Step by step instruction manual
• 68kΩ ½ Watt carbon film resistor x 1
• 1MΩ ½ Watt carbon film resistor x 1
• 1MΩ 16mm logarithmic potentiometer x 1
• 1.5kΩ ½ Watt carbon film resistor x 1
• 100kΩ ½ Watt carbon film resistor x 1
• 22kΩ ½ Watt carbon film resistor x 1
• 10kΩ ½ Watt carbon film resistor x 1
• 220kΩ ½ Watt carbon film resistor x 1
• 470Ω ½ Watt carbon film resistor x 1
• 270Ω 0.4 Watt metal film resistor x 1
• 1.1kΩ 0.4 Watt metal film resistor x 1
• 1kΩ ½ Watt carbon film resistor x 1
• 22nF 305V polypropylene capacitor x 1
• 8µF 450V axial electrolytic capacitor x 1
• 16µF 450V axial electrolytic capacitor x 1
• 22µF 35V tantalum capacitor x 1
• 100nF 50V multi-layer ceramic capacitor x 1
• 1µF 50V multi-layer ceramic capacitor x 1
• 1.5µF 35V tantalum capacitor x 1
• 6V6GT or 6П6С beam tetrode valve (Reflektor - Soviet) x 1
• ECC83 or 12AX7 double triode valve (JJ - Slovak) x 1
• LM317T 1.5A adjustable voltage regulator x 1
• 6.3mm PCB-mount switched jack socket x 1
• 6.3mm panel-mount switched jack socket x 1
• 2.1 x 5.5mm DC socket x 1
• 5mm red LED x 1
• B9A PCB-mount valve base x 1
• Octal PCB-mount valve base x 1
• High voltage DC-DC step up boost converter x 1
• 5F1 Output transformer x 1
• 10A SPST toggle switch x 1
• 1 foot of 6A double core power cable x 1
• 1 foot of 42 strand speaker cable x 1
• 1 foot of high voltage power cable x 1
• Finned heatsink x 1
• PCB screw terminal x 1
• M3 nut and bolt x 1
• Heatsink thermal pad & bush x 1
• PCB x 1

To assemble this kit, you will need the following tools:

• Soldering iron
• High quality solder
• Side cutters
• Cable stripper

 This kit will fit nicely in a G116 enclosure (Hammond 1550G).

Sturdy Dual Jack to Dual XLR Lead - 6 Metre Long

Conductor: 2 x 12 Strand 0.1mm diameter pure copper
Cable Outer Dimensions: 5mm (diameter) x 10mm

Sturdy Jack Plug to Male XLR Lead - 6 Metres Long

Conductor: 15 Strand 0.1mm diameter pure copper
Cable Outer Diameter: 6mm 

Lead joining 2 6.3mm (1/4") Jacks to 2 x 3 pin XLR Female Line Sockets (Latching) using High Quality Screened Cable 6M Long

A durable, high quality, shielded audio lead with pro quality, die-cast XLR female connectors and 6.3mm mono jack plugs, offering exceptional sound and reliability. Made with twinned high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.

• Length: 6m
• Cable diameter: Twin 5mmØ (5 x 10mm)
• Conductors: 2 x 12 strand, 0.1mmØ pure copper
• Connectors: 2 x female XLR, 2 x 6.3mm mono jack plug

8 Piece Screwdriver Kit with Carry Case

4A DC-DC Buck Step Up Voltage Regulator