0
£0.00
Featured Products
Nextion Smart Colour 2.4" LCD Touchscreen with built in Microprocessor
NX3224T024
Nextion NX3224T024 2.4" Colour LCD screen with resistive touchscreen
This "Human Machine Interface" (HMI) touchscreen can be used to control your microcontroller as well as display information in real time.
Unlike other similar displays, the Nextion screen incorporates a microprocessor that can be programmed using the Nextion Editor software to display your own custom GUI including programmable buttons, sliders and gauges.
Specification:
Resolution: 320 x 240
Colour: 16-bit 65536 colours Dimensions: 75mm (L) x 43mm (W) x 6mm (W)
Weight: 26g
Operating voltage: 5VDC
Operating current: 500mA
|
£29.50
(inc VAT £35.40)
0.91" I2C 128x32 White I2C OLED Display
LCD91
Arduino compatible 128 x 32 white OLED display
This LCD Screen is a great addition to lots of electronic projects. It has a resolution of 128 x 32 and a very high contrast. Using the SSD1306 driver IC, this module communicates via I2C, making it suitable for a wide range of microcontrollers and projects.
LED colour: White Supply voltage: 3.3V DC Display dimensions: 22.38 x 5.58mm Module dimensions: 38 x 12mm |
£4.50
(inc VAT £5.40)
1.3" I2C 128x64 Blue I2C OLED Display
LCD13
Arduino compatible 128 x 64 blue OLED display
This LCD Screen is a great addition to lots of electronic projects. It has a resolution of 128 x 64 and a very high contrast. Using the SSD1306 driver IC, this module communicates via I2C, making it suitable for a wide range of microcontrollers and projects.
LED colour: Blue Supply voltage: 3.3V DC Display dimensions: 34 x 18.5mm Module dimensions: 34 x 32mm |
£7.50
£4.50
(inc VAT £5.40) 40% Off
2.4" inch SPI IPS LCD 240 x 320 Colour Display
LCD24
2.4" inch SPI LCD 240 x 320 65K Colour Display
This LCD Screen is a great addition to lots of electronic projects. It has a resolution of 240 x 320. Using the ST7789V driver IC, this module communicates via SPI, making it suitable for a wide range of microcontrollers and projects. Display features a metal frame around for impact protection.
Resolution: 240 x 320, 65536 colours
Type: IPS LCD Driver chip: ST7789V Dimensions: 47x71x13.5mm Supply voltage: 3.3V to 5V DC |
£7.50
(inc VAT £9.00)
3.5 inch SPI IPS LCD 320 x 480 Colour Display
LCD35
3.5" inch SPI LCD 320 x 480 Colour Display
This LCD Screen is a great addition to lots of electronic projects. It has a resolution of 240 x 320. Using the ST7796S driver IC, this module communicates via SPI, making it suitable for a wide range of microcontrollers and projects. Display features a metal frame around for impact protection.
Resolution: 320 x 480
Type: IPS LCD Driver chip: ST7796S Dimensions: 59x95x6.3mm Supply voltage: 3.3V to 5V DC |
£12.00
(inc VAT £14.40)
3015F Numitron Minitron 7-Segment Filament Display
3015F
Vintage Numitron 7-Segment Filament Display
New old stock filament 7-segment display in DIL package.
Operating Voltage: 4.5-6.5V Filament Current: 8mA @ 5V (per segment) Symbol Dimensions: 9.1mm x 5mm Overall Dimensions: 22.1mm x 11.4mm x 6.1mm |
£22.00
(inc VAT £26.40)
7 Segment Display Common Anode High Efficiency Red 7.62mm 0.3"
Z76RA
|
7 Segment Display Common Anode High Efficiency Red 7.62mm (0.3") 2000mcd. |
£2.00
(inc VAT £2.40)
7 Segment Display Common Cathode High Efficiency Red 7.62mm 0.3"
Z76RC
|
7 Segment Display Common Cathode High Efficiency Red 7.62mm (0.3") 2000mcd. |
£2.00
(inc VAT £2.40)
7 Segment Red LED Ultra-Bright Common Anode 1" (25.4mm) Long Segments
Z1106CA
|
7 Segment Display Common Anode Ultra Bright Red 25.4mm (1 inch) long segments. |
£1.50
(inc VAT £1.80)
7 Segment Red LED Ultra-Bright Common Anode 14mm Display
Z140RA
|
7 Segment Display Common Anode Ultra Bright Red 14mm (0.56") 5600mcd. |
£2.75
(inc VAT £3.30)
7 Segment Red LED Ultra-Bright Common Cathode 1" (25.4mm) Long Segments
Z1106CC
|
7 Segment Display Common Cathode Ultra Bright Red 25.4mm (1 inch) long segments. |
£1.50
(inc VAT £1.80)
7 Segment Red LED Ultra-Bright Common Cathode 14mm Display
Z140RC
|
7 Segment Display Common Cathode Ultra Bright Red 14mm (0.56") 5600mcd. |
£2.75
(inc VAT £3.30)
Digital Panel Meter for Voltage and Current 0-100VDC 0-10ADC
DPM
Dual Display Panel Meter, 0-100VDC and 0-10ADC
This handy compact panel meter will display the voltage and current clearly. It is ideal for a bench power supply or any project that requires accurate voltage and or current measurement. The meter can either be powered from the supply it is measuring if it is between 4.5-30VDC or from an independant power source.
Voltage Measurment : 0 - 100VDC
Current Measurment : 0 - 10ADC
Working Voltage : 4.5 - 30VDC
Dimensions : (W)48mm x (H)29mm x (D)22mm
Connetions
Red (Thick) - Voltage in for Current Measurment
Black (Thick) - Voltage out for Current Measurment
Red (Thin) - Supply Positive 4.5-30VDC
Black (Thin) - Supply Ground
Yellow (Thin) - Voltage to be Measured 0-100VDC |
£7.50
£5.50
(inc VAT £6.60) 27% Off
DLR1414 Four Digit 5x7 Dot Matrix Display Module
DLR1414
Vintage Siemens Four Digit 5x7 Dot Matrix Display Module
New old stock dot matrix display in DIL package.
FEATURES • Dot Matrix Replacement for DL1414T • 0.145" High, Dot Matrix Character • 128 Special ASCII Characters for English, German, Italian, Swedish, Danish, and Norwegian Languages • Wide Viewing Angle: X Axis ±50°, Y Axis ±75° • Close Vertical Row Spacing, 0.800" Centers • Fast Access Time, 110 ns at 25°C • Compact Size for Hand Held Equipment • Built- in Memory • Built-in Character Generator • Built-in Multiplex and LED Drive Circuitry • Direct Access to Each Digit Independently and Asynchronously • TTL Compatible, 5 Volt Power • Low Power Consumption, 20 mA per Character Typical • Intensity Coded for Display Uniformity • Extended Operating Temperature Range: –40°C to +85°C • End Stackable, 4-Character Package |
£22.00
(inc VAT £26.40)
Dual 7-Segment Common Cathode LED Display - Red
LTD6740
Red Common Cathode Dual 7-Segment Display
Overall Dimensions: 25mm x 18.5mm x 8mm
|
£4.50
(inc VAT £5.40)
I2C Parallel to Serial Converter for Arduino Type LCD Screens
KY1602
I2C Paralel to 2 Pin Serial converter for Arduino type LCD screens
This converter can be soldered directly to a standard 1602 LCD screen to convert it to the more convenient 2 pin serial (I2C) used in many Arduino projects.
There is a removable jumper to allow connection with both backlit and non backlit screens.
A potentiometer can adjust the brightness & contrast of the LCD.
Connections
GND = Ground
VCC = 5V
SDA = Serial Data Line
SCL = Serial Clock Line
|
£2.50
(inc VAT £3.00)
LCD screen 16 characters 1 line Arduino compatible
LCD1601G
Arduino compatible Backlit LCD screen with 16 Characters on 1 Line
This LCD Screen is a great addition to lots of Arduino projects as well as many other projects.
Specs
Display Format: 16 Characters x 1 Line
Character Size: 3.07mm(W) x 6.56mm(H)
Backlight: Green
Dimensions: 80mm(W) x 36mm(H) x 15mm(T)
|
£4.00
(inc VAT £4.80)
LCD screen 16 characters 2 line Arduino compatible
LCD1602B
Arduino compatible Backlit LCD screen with 2 lines of 16 Characters (32 total)
This LCD Screen is a great addition to many Arduino and other projects.
The blue lit screen is blue has white characters and a backlight.
Specification:
Display Format: 16 Characters x 2 Lines (32 total)
Character Size: 3.07mm(W) x 6.56mm(H)
Backlight: Yes
Dimensions: 80mm(W) x 35mm(H) x 11mm(T)
|
£4.50
(inc VAT £5.40)
Nextion Smart Colour 2.4" LCD Touchscreen with built in Microprocessor
NX3224T024
Nextion NX3224T024 2.4" Colour LCD screen with resistive touchscreen
This "Human Machine Interface" (HMI) touchscreen can be used to control your microcontroller as well as display information in real time.
Unlike other similar displays, the Nextion screen incorporates a microprocessor that can be programmed using the Nextion Editor software to display your own custom GUI including programmable buttons, sliders and gauges.
Specification:
Resolution: 320 x 240
Colour: 16-bit 65536 colours Dimensions: 75mm (L) x 43mm (W) x 6mm (W)
Weight: 26g
Operating voltage: 5VDC
Operating current: 500mA
|
£29.50
(inc VAT £35.40)
Nextion Smart Colour 3.5" LCD Touchscreen with built in Microprocessor
NX4832T035
Nextion NX4832T035 3.5" Colour LCD screen with resistive touchscreen
This "Human Machine Interface" (HMI) touchscreen can be used to control your microcontroller as well as display information in real time.
Unlike other similar displays, the Nextion screen incorporates a microprocessor that can be programmed using the Nextion Editor software to display your own custom GUI including programmable buttons, sliders and gauges.
Specification:
Resolution: 480 x 320
Colour: 16-bit 65536 colours Dimensions: 100.5mm (L) x 55mm (W) x 5.5mm (W)
Weight: 48.2g
Operating voltage: 5VDC
Operating current: 500mA (typical 145mA)
|
£45.00
(inc VAT £54.00)
Red LED Vertical Light Bar
ZAR10
|
10 Segment Red LED Vertical Light Bar Vertical 2 5 X 2.5mm LEDs on 25.5X10mm 18DIL package. |
£3.50
£2.75
(inc VAT £3.30) 21% Off
Telefunken Common Anode Dual 7-Segment LED Display - Red
TDDR5250
NOS Telefunken Red Common Anode Dual 7-Segment Display
Original Telefunken NOS 13mm Digit Height
Overall Dimensions: 25mm x 17.5mm x 6mm
|
£2.00
(inc VAT £2.40)
TIL722A
TIL722A
|
Tiny LED 7 Segent Display Red RH Decimal Point Mini Pack 8 x 10mm. Original Texas Instruments Museum Pieces! |
£4.00
(inc VAT £4.80)
£3.50
(inc VAT £4.20)
£3.50
(inc VAT £4.20)
ZS1002RWA
ZS1002RWA
|
7 Segment Display. 1 inch (25.4mm) Common Anode. Red. Must be limited to 2.8V 25mA max. Package Dimensions: 33 x 22.5mm |
