Test & Measuring Equipment

Amtech® High Precision Digital Caliper 0 to 150mm Range

For outside, inside, depth and step measuring

Highly Accurate Measuring Tolerance:

• Accurancy as per DIN 862 (Measuring Tolerance: 30 µm)
• Quality:Hardened Stainless Steel
• 0-150 mm Measuring Range
• 5 digit LCD 12 x 30mm display
• Displays: 0.01 mm / 0.0005 repeatability: .
• 0.1mm / 0.0005 measuring speed: max. 1.5m / second
• Indication in inches or millimetres
• 5 min timer for battery protection
• Includes on button battery 1.5 V (SG13, LR44, SR44, V357)

MULTI NETWORK CABLE TESTER

This convenient multi network cable tester is suitable to test all RJ45 and RJ11 Cables including CAT5, CAT5E, CAT6, CAT6A, CAT7, CAT7A and CAT8 cables. This device will indicate any mis-wired, straight-wired or cross-wired connections and short-circuits. The tester is composed of a transmitter and a receiver to connect either side of the lead to be tested. Simple to use, with intuitive display.

Manual can be found here. 

Battery: 9Vdc (1 x PP3)
Dimension 100 x 100 x 28mm

See also NKIT7

DIGITAL CLAMP METER  with 3.5 digit LCD display

• DC voltage 1V - 1000V
• Dimensions 230 x 68 x 37mm
• AC voltage range: up to 600V
• DC voltage range: up to 600V
• AC current ranges: up to 200A & up to 1000A
• Resistance ranges: 200 ohms - 2M ohms 

LCR-TC2 Multi Component Tester for Transistors, Diodes, Resistors, Capacitors, Inductors, IR, etc.

This amazing little tester should be part of any hobbyist or professional's toolbox. It can measure resistance, capacitance, inductance, diodes, BJTs, JFETs, MOSFETs, IGBTs, SCRs and a wide range of IR protocols.
Complete with built-in rechargeable battery, it can be used on the go or in the workshop. The hook probe leads included are especially useful for testing components in-ciruit. 

 

Mercury Digital Multimeter & Transistor Tester plus Square Wave, Beep - in a Protective Case

This multimeter offers 19 test ranges and 7 functions
 

• Shrouded test prods

• Shockproof holster

• Continuity test function

• Transistor test function

• Square wave signal output

AC voltage: 200 - 500V
DC voltage: 200mV - 500V
DC current: 2000µA - 5A
Resistance: 200 Ohms - 2000K Ohms
Test lead length: 570mm
Dimensions: 126 x 70 x 29mm
Weight: 130g
Battery Supplied: 9Vdc PP3

Mercury Professional Digital Multimeter with 32 Ranges

A full sized and accurate multimeter with mutiple functions with shock-proof case.

*  Supplied with rubber holster, shrouded test leads & PP3 battery
*  Volts, Amperes (Amps), Resistance (Ohms) & Capacitance (pF, nF uF)
*  Auto power off
*  Continuity tester
*  Transistor teste
*  Reading hold

Battery: 9Vdc (PP3 supplied)
AC current: 2mA - 10A
DC current: 2mA - 10A
AC voltage: 200mV - 600V
DC voltage: 200mV - 600V
Capacitance: 20nF - 200µF
Resistance: 200 Ohms - 200M Ohms
Test leads length: 660mm
Dimensions: 190 x 90 x 33mm
Weight: 190g

Network Cable Tool Kit 7 in 1 

1 x Crimping Cutter Tool With Stripper

2 x Screwdrivers
1 x Black Stripping Tool
1 x RJ45 Multi- Purpose Punch Down Tool
1 x Oubao Stripping Tool
1 x R45 RJ11 Network Cable Tester
10 x RJ45 Modular Plug Network Connectors

 Comprehensive Pro-Audio Cable Tester for XLR, Speakon, Jacks, DIN, Banana, Phono RCA, RJ45 etc

BAT393 Universal Battery Tester

Easy to use battery tester with an easy-to-read, accurate needle display. Tests for most batteries inc button cells.  Why throw away good batteries?

• Measures the batteries under load to accurately indicate their state
• Suitable to test AA, AAA, C, D, Button Cells, Coin Cells and 9V PP3 batteries and button cells
• Works without power.

High Quality Crocodile Clips for use with Multimeter Test Leads
  
Features:

• Cat. II rating
• Shrouded connectors
• Comfortable rubber grip

High Quality Silicone Multimeter Test Leads with Crocodile Clips 

Cable Length: 880mm
Total length: 1050mm
Red: positive   Black: negative
Maximum Voltage: 1000V Max. Current 20A

Features:

• Gold plated probe tips for better contact and corrosion resistance
• Cat. III rating (croc clips are Cat. II)
• Supplied with removable probe protection caps
• Shrouded connectors
• Comfortable rubber grip
• Fit most multimeters

High Quality Multimeter Test Leads with 4mm Shrouded Plugs
 

Cable Length: 880mm
Total length: 1050mm
Red: positive   Black: negative
Maximum Voltage: 1000V Max. Current 20A

Features:

• Gold plated tips for better contact and corrosion resistance
• Cat. III rating
• Supplied with removable probe protection caps
• Shrouded connectors
• Comfortable rubber grip
• Fit most multimeters

Crocodile / Alligator clip. 35mm with Soft Black Insulated Cover & Strong Spring Grip

Miniature spring-loaded retractable hook test probe, Black

Ideal for attaching to component legs for testing 

Great for testing and prototyping

Specifications:

Length: 43mm 

Brass hook size: mm x 0.4 0.9 mm

Solder type

Miniature spring-loaded retractable hook test probe, Blue

Ideal for attaching to component legs for testing 

Great for testing and prototyping

Specifications:

Length: 43mm 

Brass hook size: mm x 0.4 0.9 mm

Solder type

Miniature spring-loaded retractable hook test probe, Green

Ideal for attaching to component legs for testing

Great for testing and prototyping

Specifications:

Length: 43mm 

Brass hook size: mm x 0.4 0.9 mm

Solder type

Miniature spring-loaded retractable hook test probe, red

Ideal for attaching to component legs for testing 

Great for testing and prototyping

Specifications:

Length: 43mm 

Brass hook size: mm x 0.4 0.9 mm

Solder type

Miniature spring-loaded retractable hook test probe, Yellow

Ideal for attaching to component legs for testing

Great for testing and prototyping

Specifications:

Length: 43mm 

Brass hook size: mm x 0.4 0.9 mm

Solder type

Miniature spring-loaded retractable pincer probes - pack of 10

Ideal for SMD components

Great for testing and prototyping

5 Colours 

Specifications:

50 mm length

Solder type

Crocodile / Alligator clip. 35mm with Soft Red Insulated Cover & Strong Spring Grip

Croc-clip. 45mm long with Black Insulated handles with Screw connection and 4mm socket for banana plug

Croc-clip. 45mm long with Red Insulated handles with Screw connection and 4mm socket for banana plug

Strengthened Flexible Crocodile Test leads - Set of 10

DPOX180H 180MHz Dual Channel Digital Phosphor Oscilloscope with Function Generator

The DPOX180H is a small but mighty portable digital phosphor oscilloscope (DPO) with a bandwidth of 180MHz and high sampling rate of 500MS/s. Fully featured with a 2.8" IPS digital fluorescent display, 3000mAh Li-ion batttery, 50000wfm/s waveform refresh rate and 20MHz DDS function generator. All the benefits of a modern digital storage oscilloscope combined with the added benefits of an analogue oscilloscope display.

Package Contents:

1 * DPOX180H Digital Phosphor Oscillograph
2 * Matching 200MHz Probe (1X & 10X)
1 * 5V2A Power Adapter
1 * USB Data Line
1 * User Manual (English and Chinese)

Specifications:

Number of channels 2
Analog bandwidth 180MHZ
Maximum sampling rate 500MSPS
Input coupling DC/AC
Rise time 2.5nS
Storage depth 120Kpts
Input impedance 1MΩ-18PF
Vertical sensitivity 5mV ~ 10V(1X)
Time base range 5nS ~ 50S
DC accuracy ±2%
Time accuracy ±0.01%
Measurement range 40mV ~ 80V(1X)
Digital phosphor technolog support
Color temperature display support
Zoom scaling time base support
20M hardware bandwidth limitation support
Adjustable automatic bandwidth limitation support
X-Y mode support
FFT support
Cursor measurement Frequency/Period/Amplitude
Trigger detection Digital trigger
Trigger mode Auto/Single/Normal
Trigger edge Rising/Falling
Roll mode support
Screenshot storage 90
Waveform storage 250 groups
Capture signal 500
Parameter measurement 12 kinds
Signal generator 14 standard function signals
Auto-adjustment support
Waveform manager support
Waveform output support
High-voltageburnout protection support
Screen size 2.8 inches
Screen resolution 320x240
Display technology IPS full view
Expansion interface USB transmission interface
Auto power-off 5minutes-2hours
Firmware upgrade support
Charging requirements 5V 2A
Battery capacityï 3000mAh
Standby time 3.5 hours at full charge
Dimensions 135mmx90mmx40mm

FNIRSI-1014D 2-in-1 Dual Channel 100MHz 1GS/S Digital Oscilloscope with Signal Generator

Advanced Signal Analysis and Generation
The FNIRSI-1014D Digital Oscilloscope is a versatile tool designed for both hobbyists and professionals in the electrical field. With a dual channel input and a 100MHz*2 analogue bandwidth, this oscilloscope is capable of capturing signals with precision and clarity. The 1GSa/s real-time sampling rate ensures that even the fastest signals are captured without any loss of detail. The oscilloscope's trigger modes, including single, normal, and auto, allow for flexible triggering options, making it suitable for both periodic and aperiodic signals.

Comprehensive Signal Generation and Storage
The FNIRSI-1014D oscilloscope is not just a signal analyser; it doubles as a signal generator. With its built-in DDS function, it can produce 12 standard function signals and a customisable chopping signal. The chopping output feature, with a 2.5vpp amplitude, is particularly useful for generating irregular shaped signals. The oscilloscope's storage depth of 240Kbit and 1GB storage space allow for the storage of up to 1000 screenshots and 1000 sets of waveform data, making it an ideal tool for capturing and analysing complex signals. 

User-Friendly Interface and Convenience
The oscilloscope's user-friendly interface is designed to enhance the user experience. The 7-inch 800 * 480 resolution color TFT LCD display provides bright and clear visuals, while the cursor measurement function simplifies manual reading of amplitude and frequency parameters. The one-button auto feature automatically adjusts the oscilloscope for optimal viewing, and the one-button waveform storage and screenshot function make it easy to capture and save important waveforms. The powerful waveform image manager allows for efficient browsing, viewing, and analysis of captured signals, making it a valuable tool for both hobbyists and professionals.

Features:

• Dual Channel
• 2 in 1: Digital Oscilloscope + DDS Function Signal Generator
• 1GSA/S sampling rate, 100MHz * 2 analog bandwidth.
• Complete trigger function (single/normal/automatic).
• Capable of storing up to 1000 customized chopping signals.
• high-voltage protection module.
• One-button AUTO and adaptive trigger (25%, 50%, 75%).
• 7-inch 800*480 resolution high-definition LCD screen.
• Powerful Waveform Picture Manager.
• One-key Screenshot and Saving.
• Cursor measurement function.
• USB Picture Export
• Lissajous Graphic Display & FFT Viewing.
• Ideal for both periodic analog and aperiodic digital signals.

Digital Oscilloscope Specification:

Brand:  FNIRSI

Model:  1014D

Channels:  2

Material:  High-quality ABS

Analog Bandwidth:   100MHz * 2

Sampling Rate:   1GSa/s

Vertical Sensitivity:  50mV/div ~ 500V/div

Horizontal Timebase:  5OS/div ~ 10nS/div

Storage Depth:  240Kbit

Input Resistance:  1MΩ

ADC Precision:  8bits

Rise Time:  < 3nS

Coupling:  AC/DC

Trigger Modes:  Auto / Normal / Single

Trigger Edge:  Rising edge / Falling edge

External Trigger Voltage:  0~40 V

Maximum Test Voltage: 40V (lX probe), 400V (10X probe)

Waveform Manager:  Support (1000 pic + 1000 waveform)

USB Export:  Supported

Capture Output:  Supported

Power Supply:  5V 2A/3A/4A

Frequency Precision:  ±0.01%

Roll Mode:  Supported

One-button AUTO:  Supported

Display:  7-inch 800*480 resolution color TFT LCD

Dimensions:  310mm * 145mm * 70mm

Parameter:  12 kinds in total

Generator:  14 kinds in total

Signal Generator Specification:

Channels:  1

Waveform Type:  14 standard signals (@ 2.5vpp) + 1 customizable signal (Only the Frequency is adjustable)

Capture Output:  Supported

Sine Wave Max Frequency:  10MHz

Other Wave Max Frequency:  2MHz

Customize Signal Max Frequency:  1MHz

Frequency Resolution:  1Hz

HIGH PRECISION OSCILLOSCOPE PROBE (X1 X10)
with BNC to Switchable probe + croc-clip.
A super quality 60MHz oscilloscope probe with switchable x1 and x10 input ratios.

*  Max input voltage is 600V peak or 200VAC (rms)
*  1.2m of lead with BNC connector

Large Croc-clip. Extra Heavy Duty. 100mm long with Strong Spring Grip. 50 Amps Black

Large Croc-clip. Extra Heavy Duty. 100mm long with Strong Spring Grip. 50 Amps Red