citronic

CASA Active PA Cabinets with DSP, USB/SD and Bluetooth

Versatile full-range active moulded PA cabinets with built-in high efficiency class D amplifier. A DSP controller offers 5 switchable output profiles which are suited to different program material. Inputs are provided on XLR/jack with mic/line level switching and RCA line connectors. A built-in audio module provides playback from USB or SD media and Bluetooth wireless pairing. These cabinets are fully featured for virtually any PA application and pair perfectly with the CASA series sub cabinets for high energy sound reinforcement.
 

• High efficiency class D bi-amplifier section

• DSP speaker control with 5 selectable profiles

• Inbuilt USB/SD audio player

• Bluetooth wireless connectivity

• High impact moulded cabinet with side and top handles.

• 35mm pole mount socket

Citronics CASA Active Sub Cabinet 500W max 300W rms with 10" Driver

Lightweight yet powerful active subwoofer

Class D amplifier. Constructed from 15mm MDF with integral side handles for easy portability

35mm socket to accommodate a mounting pole.

Front-loaded speaker with a protective steel grille to deliver powerful detail

Class D amplifier section has stereo line inputs and outputs

Use either as a mono sub with stereo tops or a matching sub for each top speaker.

Line inputs have a parallel Link output to pass the signal onto further active speakers

A phase switch is included to avoid sound cancellation

• Compact and lightweight design
• 15mm MDF cabinets with hard-wearing paint finish
• 2 x side carry handles
• 35mm pole mount socket
• Power supply 230Vac, 50Hz (IEC)
• Construction15mm MDF with durable texture paint finish
• Hardware 2 x side carry handles + 35mm pole mount socket
• Amplifier: constructionClass D
• Line inputs L+R balanced XLR
• Line outputs L+R balanced XLR & L+R link XLR
• Controls Output level, phase switch, high pass x-over (output)
• Weight: 16.23kg

Active speakers contain their own amplifier to drive the speaker,  impedance and power handling matched

A simple solution for distributed audio systems.

Citronic D1000 500W+500W RMS 19" rackmount 1U Power Amplifier 

Citronic D1000 300W+300W RMS 19" rack-mount 1U Power Amplifier 

DM50S Neodymium Dynamic Vocal Microphone

citronic PLX2000 Class H 1000W+1000W RMS in to 2 ohms 19" Rackmount High Power Amplifier 

Citronic PLX2800 Class H 1400W+1400W RMS in to 2 ohms 19" Rackmount High Power Amplifier 

Citronic PLX3600 Class H 1800W+1800W RMS in to 2 ohms 19" Rackmount High Power Amplifier 

Citronic PPX300 150W+150W RMS 19" Rackmount 2U Power Amplifier 

Cardioid USB studio Condenser Microphone

with a gold sputtered diaphragm housed in a precision engineered alloy body and plated steel mesh. Powered by USB with integral FET preamp and A/D converter, delivering accurate digital audio to the USB type B connector.

Plug-and-play, PC and Mac compatible

USB bus powered

Blue LED power on indicator

Supplied with shock mount, USB lead and carrying pouch, Power supply

Current consumption26mA 5VDC (USB)

ConnectorUSB type B

• ElementsBack electret condenser capsule
• Polar pattern Cardioid
• Sensitivity -32dB (0dB = 1V/Pa @ 1kHz)
• SPL input max 140dB (@ 1kHz ?1% THD)
• Frequency response 30Hz - 18kHz
• Signal to Noise Ratio 84dBA
• Sampling Format 16 bit 48KHz
• Dimensions 180 x 50mm

Active sound-reinforcement speakers with polypropylene enclosures and built-in class-D amplifier modules. Each cabinet is equipped with an extended frequency main driver and a titanium compression driver for optimum clarity. Power from the internal bi-amplifier is controlled from an internal DSP section, offering pre-set profiles with crossover, EQ and dynamics processing to suit the program material. Custom settings can be created via the onboard rotary encoder and backlit display or by connecting the CLARA unit to a PC or laptop via USB and editing using the free-to-download ADU software application. 2 combo inputs on the rear panel can accept balanced or unbalanced line level audio with 6.3mm jack or XLR connection. An integral Bluetooth® receiver can be paired to a smart phone and audio can be streamed wirelessly through input A. In addition to a line level input for input B, there is a mic/line level switch to enable direct connection of a microphone. Maximum sound impact from a lightweight and easy to manage cabinet.

• DSP speaker management with editing software
• Bluetooth connectivity
• High power class-D bi-amplifier
• High impact PP cabinet with side & top handles
• 35mm pole mount socket

CX23 ACTIVE CROSSOVER - 2 / 3 WAY

The CX23 is a professional 2-way stereo or 3-way mono active crossover designed to split frequencies, enabling low frequencies to be delivered to the amp driving the subs and mid/top frequencies are delivered to the amp driving the mid/tops. This system efficiently delivers high quality sound, especially in large PA systems.

CX34 ACTIVE CROSSOVER - 2 / 3 / 4-WAY

The CX34 is a professional 2 or 3-way stereo or 4-way mono active crossover designed to split frequencies, enabling low frequencies to be delivered to the amp driving the subs and mid/top frequencies are delivered to the amp driving the mid/tops. This system efficiently delivers high quality sound, especially in large PA systems.

citronic CEQ215 DUAL 15 BAND GRAPHIC EQUALISER

The CEQ215 is a 19" rack mounted dual 15-band graphic equaliser, which allows the adjustment of labelled frequencies via the individual cut/boost faders. Up to 12dB of cut or boost for frequencies ranging from 25Hz to 16kHz for accurate audio spectrum control.

• 2 x 15-band 2/3 octave ISO spacing
• RF filtered servo-balanced inputs
• Constant Q each band
• Bypass switch for EQ comparison
• Low-cut switch each channel
• Gain control each channel
• LED VU meters
• 19" rackmount 1U

CEQ231 DUAL 31 Band Graphic Equaliser

• 2 x 31-band 1/3 octave ISO spacing
• RF filtered servo-balanced inputs
• Constant Q each band
• Bypass switch for EQ comparison
• Low-cut switch each channel
• Gain control each channel
• LED VU meters
• 19" rackmount 2U

Citronic 15 Inch 900W max 500W RMS SUBWOOFER DRIVER - 8 ohm

• Strong Steel basket
• Reinforced paper cone
• Type12" 450W 8 Ohm

• Power handling : rms500W
• Power handling : peak900W
• Frequency response40Hz - 2kHz
• Impedance (nominal)8 Ohms
• Dimensions210 x 385mmØ

citronic 170.862UK Compact Mixer with DSP, USB Play/Record/PC and Bluetooth

Compact format audio mixer with 2, 4 or 6 mono input channels, a stereo line input and a further mini jack stereo input. Each mono mic/line channel has a combo XLR/jack input with +48V phantom power switchable in pairs for the XLR inputs. Each mic/line channel has a Gain control for matching the input source and a low-cut switch to filter out rumble or handling noise from microphones. Each mono channel also has High/Low EQ controls and an FX level control. Pairs of mono channels can be linked to act as a stereo left + right pair as required. The onboard foot-switchable DSP effects engine has 99 presets for delay, reverb and modulation effects, each of which can be adjusted using two parameter controls. An onboard Bluetooth receiver has an illuminated pairing button and independent volume control. The USB type-A port on the top panel is for playback of audio files or can be used to record the main outputs to a USB storage device or as an external audio device when connected to a laptop. Output is delivered to a pair of balanced XLR connectors to provide low noise operation for high quality studio or live performances.

Weight: 0.875kg
Dimensions: 183 x 182 x 60mm
Inputs: 2 x combo XLR/jack + stereo L+R 6.3mm + stereo 3.5mm
Power supply: 5V DC 1A min. (USB-C adaptor included)
Power consumption max.: 5W
Effects: 99 program DSP (2 parameter controls)
DSP sample rate: 48khz (24-bit)
Audio source: Bluetooth receiver, USB mp3 player/recorder
Bluetooth version: v5.1 (+BR+EDR+BLE)
USB version: v1.1 audio (mp3/wav/ape/flac)
EQ low: ±15dB @ 80Hz
EQ high: ±15dB @ 12kHz
Phantom power: +48V switchable in pairs (XLR inputs only)
Frequency response: 20Hz - 22kHz (±1dB)
Input level: Mic +10dBu max. / Line +22dBu max.
Input impedance: Balanced XLR 2k Ohm, Balanced TRS jack 10k Ohm
THD +N: <0.05% @ 1kHz
Noise: EIN -122dBu (22Hz - 22kHz)
CMRR: >75dB (Mic 1kHz)
Sensitivity: XLR -60 to +10dBu, TRS jack -20 to +20dBu, Stereo -20 to +14dBu
Crosstalk, stereo: >80dB (1kHz fader shutoff)
Outputs: Left + Right balanced XLR, Headphones 6.3mm jack
Max. output level: XLR +22dBu, TRS +20dBu

citronic 170.864UK Compact Mixer with DSP, USB Play/Record/PC and Bluetooth

Compact format audio mixer with 4 input channels, a stereo line input and a further mini jack stereo input. Each mono mic/line channel has a combo XLR/jack input with +48V phantom power switchable in pairs for the XLR inputs. Each mic/line channel has a Gain control for matching the input source and a low-cut switch to filter out rumble or handling noise from microphones. Each mono channel also has High/Low EQ controls and an FX level control. Pairs of mono channels can be linked to act as a stereo left + right pair as required. The onboard foot-switchable DSP effects engine has 99 presets for delay, reverb and modulation effects, each of which can be adjusted using two parameter controls. An onboard Bluetooth receiver has an illuminated pairing button and independent volume control. The USB type-A port on the top panel is for playback of audio files or can be used to record the main outputs to a USB storage device or as an external audio device when connected to a laptop. Output is delivered to a pair of balanced XLR connectors to provide low noise operation for high quality studio or live performances.

Weight: 1.125kg
Dimensions: 232 x 183 x 60mm
Inputs: 4 x combo XLR/jack + stereo L+R 6.3mm + stereo 3.5mm
Power supply: 5V DC 1A min. (USB-C adaptor included)
Power consumption max.: 5W
Effects: 99 program DSP (2 parameter controls)
DSP sample rate: 48khz (24-bit)
Audio source: Bluetooth receiver, USB mp3 player/recorder
Bluetooth version: v5.1 (+BR+EDR+BLE)
USB version: v1.1 audio (mp3/wav/ape/flac)
EQ low: ±15dB @ 80Hz
EQ high: ±15dB @ 12kHz
Phantom power: +48V switchable in pairs (XLR inputs only)
Frequency response: 20Hz - 22kHz (±1dB)
Input level: Mic +10dBu max. / Line +22dBu max.
Input impedance: Balanced XLR 2k Ohm, Balanced TRS jack 10k Ohm
THD +N: <0.05% @ 1kHz
Noise: EIN -122dBu (22Hz - 22kHz)
CMRR: >75dB (Mic 1kHz)
Sensitivity: XLR -60 to +10dBu, TRS jack -20 to +20dBu, Stereo -20 to +14dBu
Crosstalk stereo: >80dB (1kHz fader shutoff)
Outputs: Left + Right balanced XLR, Headphones 6.3mm jack
Max. output level: XLR +22dBu, TRS +20dBu

citronic 170.866UK Compact Mixer with DSP, USB Play/Record/PC and Bluetooth

Compact format audio mixer with 6 input channels, a stereo line input and a further mini jack stereo input. Each mono mic/line channel has a combo XLR/jack input with +48V phantom power switchable in pairs for the XLR inputs. Each mic/line channel has a Gain control for matching the input source and a low-cut switch to filter out rumble or handling noise from microphones. Each mono channel also has High/Low EQ controls and an FX level control. Pairs of mono channels can be linked to act as a stereo left + right pair as required. The onboard foot-switchable DSP effects engine has 99 presets for delay, reverb and modulation effects, each of which can be adjusted using two parameter controls. An onboard Bluetooth receiver has an illuminated pairing button and independent volume control. The USB type-A port on the top panel is for playback of audio files or can be used to record the main outputs to a USB storage device or as an external audio device when connected to a laptop. Output is delivered to a pair of balanced XLR connectors to provide low noise operation for high quality studio or live performances.

Weight: 1.395kg
Dimensions: 282 x 183 x 60mm
Inputs: 6 x combo XLR/jack + stereo L+R 6.3mm + stereo 3.5mm
Power supply: 5Vdc 1A min. (USB-C adaptor included)
Power consumption max.: 5W
Effects: 99 program DSP (2 parameter controls)
DSP sample rate: 48khz (24-bit)
Audio source: Bluetooth receiver, USB mp3 player/recorder
Bluetooth version: v5.1 (+BR+EDR+BLE)
USB version: v1.1 audio (mp3/wav/ape/flac)
EQ low: ±15dB @ 80Hz
EQ high: ±15dB @ 12kHz
Phantom power: +48V switchable in pairs (XLR inputs only)
Frequency response: 20Hz - 22kHz (±1dB)
Input level: Mic +10dBu max. / Line +22dBu max.
Input impedance: Balanced XLR 2k Ohm, Balanced TRS jack 10k Ohm
THD +N: <0.05% @ 1kHz
Noise: EIN -122dBu (22Hz - 22kHz)
CMRR: >75dB (Mic 1kHz)
Sensitivity: XLR -60 to +10dBu, TRS jack -20 to +20dBu, Stereo -20 to +14dBu
Crosstalk stereo: >80dB (1kHz fader shutoff)
Outputs: Left + Right balanced XLR, Headphones 6.3mm jack
Max. output level: XLR +22dBu, TRS +20dBu

citronic CSL14 14 Channel Mixer Console with DSP

• 24-bit 16 program DSP effects
• 48V phantom power for XLR inputs
• 3-band EQ per channel
• 7-band global graphic EQ
• IEC mains powered
• Balanced main outputs

Sturdy Dual Jack to Dual XLR Lead - 1.5 Metre Long

Conductor: 2 x 12 Strand 0.1mm diameter pure copper
Cable Outer Dimensions: 5mm (diameter) x 10mm

Sturdy Jack Plug to Male XLR Lead - 1.5 Metre Long

Conductor: 15 Strand 0.1mm diameter pure copper
Cable Outer Diameter: 6mm 

Sturdy Jack Plug to Male XLR Lead - 12 Metres Long

Conductor: 15 Strand 0.1mm diameter pure copper
Cable Outer Diameter: 6mm 

Sturdy Dual Jack to Dual XLR Lead - 3 Metre Long

Conductor: 2 x 12 Strand 0.1mm diameter pure copper
Cable Outer Dimensions: 5mm (diameter) x 10mm

Sturdy Jack Plug to Male XLR Lead - 3 Metres Long

Conductor: 15 Strand 0.1mm diameter pure copper
Cable Outer Diameter: 6mm 

Sturdy Dual Jack to Dual XLR Lead - 6 Metre Long

Conductor: 2 x 12 Strand 0.1mm diameter pure copper
Cable Outer Dimensions: 5mm (diameter) x 10mm

Sturdy Jack Plug to Male XLR Lead - 6 Metres Long

Conductor: 15 Strand 0.1mm diameter pure copper
Cable Outer Diameter: 6mm