Battery Holders & Battery Snaps

10 X AA Battery Holder two rows of 5. All in series for 15V (alakline) or 12V (NIMH) total. PP3 clips.

Battery Holder for 2 X AA Batteries, In series to give 3V total. PP3 battery clip connections.

Battery Holder for 3 X AA Batteries, In series to give 4.5V total. PP3 snaps

Battery Holder for 4 X AA Batteries in series. Side by side with PP3 Clips. All connected in series to give 6V total.

Battery holder for 4 X AA Batteries Arranged 2 x 2. All in series to give 6V total. PP3 Snap Connectors

Picture shows only 2 battery compatrments, there are another two directly behind.

Polypropylene Battery holder for 6 X AA Batteries,

Arranged 3 x 2. All in series to give 9V total.

PP3 clips (can be soldered)

8 X AA Battery Holder two rows of 4. All in series for 12V (alakline) or 9.6V (NIMH) total. PP3 clips

Battery holder for 2 X AAA batteries - in series to give 3V. Solder Tags on Top End

Battery holder for 4 X AAA batteries. In series to give 6V. Solder Tags

Battery holder for 1 X C Battery with 2 solder tags, one at each end.

Battery Holder for 2 x C batteries. In series. PP3 snaps

Battery Holder for 4 C Batteries. 2 long x 2 wide.

All in series to give 6V total. PP3 snaps

Battery holder for 2 X D Batteries. In series for 3V total. PP3 snaps

Battery Holder for 2 x 18650 Battery.

150mm Insulated Wires

Horizontal Coin Battery Holder for CR2032, CR2025, CR2020, CR2016, CR2012 Lithium and other 20mm diameter cells

Battery holder for single N cell. 13.5 x 35mm approx. 14mm PCB pins.

Fits N cells, MN21, GP23A, VR22, A22, A23, LN08, L1028 etc

Pair of Battery Holder Clips for 18650 Batteries.

These clips are designed to safely hold single or multiple 18650 batteries in place to make a custom battery pack. They interlock together while keeping the required air space between each cell to prevent overheating of the pack. 

You will get a Pair of clips that will be hold 1 battery. 

Strong Solid Plastic PP3 9 Volt  Battery Snaps.

100mm long lead with molded centre-positive 2.1 x 5.5mm DC connector. Great for powering Arduino or other similar boards off a battery. 

Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more  batteries

Strong Solid Plastic PP3 9 Volt  Battery Snaps.

With 150mm Red & Black PVC covered wires emerging at one end.

Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more  batteries

Strong Solid Plastic PP3 9 Volt  Battery Snaps.

With 150mm Red & Black PVC covered wires emerging at the center.

Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more  batteries

PP3 Battery Holder with solderable PCB pins & 3 mounting holes.

54 x 30 x 21mm

PP9 Battery Snaps. One piece. Leads 100mm min long

Fits Large 9 Volt PP9 battery (not to be confused with smaller PP3 9V battery).

Battery Holder for 4 x 18650 Battery.

150mm Insulated Wires

Battery Holder for 1 x 18650 Battery.

150mm Insulated Wires

Battery Holder for 3 x 18650 Battery.

150mm Insulated Wires

Horizontal Coin Battery Holder for CR2032, CR2025, CR2020, CR2016, CR2012 Lithium and other 20mm diameter cells.