PCB, Stripboard, Matrix Boards, Tagboards & Breadboards

Original Design Stripboard track-cutter. Separates and breaks circuits at required point.

Just insert into hole and press & turn to remove unwanted copper-strip between tracks.

Breaks tracks in veroboard and othe stripboards.

Pack of 10 Self Adhesive PCB Pillars in Nylon. 12.7mm length with 3M tape on base and snap-lock PCB fitting. For mounting PCBs without drilling.

Pack of 10 Self Adhesive PCB Pillars in Nylon. 6.4mm length with 3M tape on base and snap-lock PCB fitting.

For mounting PCBs without drilling.

Pack of 10 Self Adhesive PCB Pillars in Nylon. 9mm length with 3M tape on base and snap-lock PCB fitting.

For mounting PCBs without drilling.

Pack of 20 Nylon PCB Spacers  3mm Hole Unthreaded.12mm Tall

Pack of 20 Nylon PCB Spacers  3.2mm Hole Unthreaded. 6mm Tall

Pack of 20 Nylon PCB Spacers  3.2mm Hole Unthreaded. 8mm Tall

Pack of 20 Nylon PCB Spacers with M3 Thread. 6mm Tall

Pack of 20 Nylon PCB Spacers with M3 Thread. 8mm Tall

Solderless Female to Female Jumper Leads in a set of 40

This set of coloured female to female jumper leads can be used together or peeled apart into smaller sets or single leads. They are great for prototyping with boards like Arduinos and Raspberry Pi.

With 10 different colours and 4 of each colour, it's easy to keep track for quick fault finding. 

Colours: Red, Orange, Yellow, Green, Blue, Grey, Purple, Brown, Black and White

Length: 200mm

Solderless Male to Female Jumper Leads - set of 40

This set of coloured male to female jumper leads can be used intact, or peeled appart into small sets or single leads. Great for prototyping with Arduino, Raspbery Pi and other projects

Keep track easily with 10 different colours for quick fault finding. 

4 of each: Red, Orange, Yellow, Green, Blue, Grey, Purple, Brown, Black and White

Each length: 200mm

Solderless Jumper Leads for use with Breadboard

This set of coloured jumper leads, invaluable when creating circuits with Breadboard. Seven different colours and Four different lengths will simplify your connections, keeping  your work neat and clear to identify. 

Colours: Red, Orange, Yellow, Green, Blue, Black and White

Lengths: 120mm, 165mm, 200mm and 240mm

Solderless Plug-In Breadboard 0.1 inch - 2.54mm spacing.

400 Points. 2 x 30 x 5 commoned points. 4 rows of 25 points. Self-adhesive backing, or use free-standing.

deal for experiments & prototyping.

Solderless Prototype Plug-In Breadboard 0.1 inch - 2.54mm spacing

Ideal for experiments & teaching. 830 Points. 2 x 63 x 5 and 4 x 10 commoned points.

63 rows of 5 points. Self-adhesive backing (or use free-standing).

Can be used over and over again for prototyping circuits.

Useful numbered grid. Accepts IC sockets, ICs and pin strips, transistors, resistors capacitors, LEDs, diodes, wire, etc

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 119 x 455mm

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 25 X 64mm

Easy soldering

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 64 X 95mm

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) sacing 95 X 127mm

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 95mm x 432mm

Plain Board. Pierced at 0.1" (2.54mm) spacing without copper. 127 x 95mm

For use with circuit pins CQP1 & CQP2 

Can be cut to size or simply snapped off on a straight  edge. 

Made from Synthetic Resin Bonded Paper.

Matrix Board. 0.1 inch (2.54mm) with Copper Padded Holes Single Copper Pads around individual holes

They are not connected to each othe - connect with wires or jumpers.

Phenolic 1.8mm Board. 2200 holes. 160 x 115mm. Rows and Columns marked for easy identification

Matrix Board. 0.1 inch (2.54mm) spacing with Single Copper Padded Holes

They are not connected to each other. 

You can connect with wires or jumpers. Phenolic 1.8mm Board. 371 holes. 72 x 47mm. Rows and Columns marked for easy identification

Matrix Board. 0.1 inch spacing (2.54mm) with Single Copper Padded Holes

They are not connected to each other.

Connect with wires. Phenolic 1.8mm Board. 750 holes. 94 x 71mm.

Rows and Columns marked for easy identification

High Quality Nickel Plated Tag Strip with 5 Solder Tags,

Etch Resist Pen for drawing circuits directly on to copper board before etching

250 gram Pot of Pure Ferric Chloride Hexahydrate Granules, for etching the copper from printed circuit boards etc

For best results dissolve in warm water at approx 36 deg C

Warning - Ferric Chloride cn stain clothing and materials.

Handle with Care

Very Pure Product

Pack of 100 Double Sided Circuit Pins to fit 0.1 inch 2.5mm Strip Board, Matrix Board & Plain Board

Pack of 100 Single Sided Circuit Pins to fit 0.1 inch 2.5mm Strip Board, Matrix Board & Plain Board