Products Map

GU10 Lamp Ceramic Fitting for GU10 Lamp with 100mm heat resistant fly lead

Volatge rating: 220V - 250V

Wattage Raing: 100W max

CE and VDE approvals

MR16 2 pin GU5.3 Ceramic Lamp Socket Holder

Suitable for low voltage up to 24V LED & halogen reflector lamps - max 100W

Lamp holder socket with 90mm long heatproof cable

5mm pin spacing

Guitar Fuzz Effects Pedal Kit with Authentic Newmarket Germanium Transistors

This kit is based on the legendary fuzz face pedal. Instead of ultra rare germanium transistors, it uses new old stock Newmarket PNP germanium transistors to give you that classic germanium fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building. A schematic and layout diagram will be provided with the kit.
 

The following components are included in this kit:

• Circuit Layout Diagram + Schematic x 1
• Volume (500kΩ LOG) and fuzz (5kΩ LIN) potentiometers x 1 each
• NKT128 Transistors x 2
• CPB10N Boxpoly 10nF Capacitor x 1
• 2.2µF Electrolytic Capacitor x 1
• 22µF Electrolytic Capacitor x 1
• 330Ω Metal Film Resistor x 1
• 33kΩ Metal Film Resistor x 1
• 100kΩ Metal Film Resistor x 1
• 8.2kΩ Metal Film Resistor x 1 
• 6.3mm (1/4") Open Jack Socket x 2
• PP3 9V Battery Snap x 1
• DPDT Latching Footswitch x 1
• 9x25 Stripboard x 1

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (optional - only needed if you want to use an enclosure)

Guitar Fuzz Effects Pedal Kit with Authentic Newmarket Germanium Transistors

This kit is based on the legendary fuzz face pedal. Instead of ultra rare germanium transistors, it uses new old stock Newmarket vintage NPN germanium transistors to give you that classic germanium fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building. A schematic and layout diagram will be provided with the kit.
 

The following components are included in this kit:

• Circuit Layout Diagram + Schematic x 1
• Volume (500kΩ LOG) and fuzz (5kΩ LIN) potentiometers x 1 each
• NKT713 Transistors x 2
• CPB10N Boxpoly 10nF Capacitor x 1
• 2.2µF Electrolytic Capacitor x 1
• 22µF Electrolytic Capacitor x 1
• 330Ω Metal Film Resistor x 1 
• 33kΩ Metal Film Resistor x 1
• 100kΩ Metal Film Resistor x 1
• 8.2kΩ Metal Film Resistor x 1
• 6.3mm (1/4") Open Jack Socket x 2
• PP3 9V Battery Snap x 1
• DPDT Latching Footswitch x 1
• 9x25 Stripboard x 1

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (optional - only needed if you want to use an enclosure)

Guitar Fuzz Effects Pedal Kit

There is now a v2! Click here

This kit is based on the legendary fuzz face pedal. Instead of germanium transistors, it uses newer, more commonly available NPN silicon transistors to give you a harsh and sharp fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building.
 

The following components are included in this kit:

• Instructions  x 1
• Volume (500kΩ LIN) and fuzz (5kΩ LIN) potentiometers x 1 each
• BC108 and BC183 Transistors x 1 each
• 10nf Dipped Polyester Capacitor x 1
• 2.2µF Electrolytic Capacitor x 1
• 22µF Electrolytic Capacitor x 1
• 470Ω Metal Film Resistor x 1
• 33kΩ Metal Film Resistor x 1
• 100kΩ Metal Film Resistor x 1
• 2.2kΩ Metal Film Resistor x 1
• 6.3mm (1/4") Open Jack Socket x 2
• PP3 9V Battery Snap x 1
• 3PDT Latching Footswitch x 1
• PCB x 1

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (optional - only needed if you want to drill an enclosure)

3 Axis accelerometer and gyroscope module for Arduino and other microcontroller projects

This module has an MPU-6050 accelerometer and gyroscope IC on a GY-521 breakout board, making it easy to use this amazing sensor.

The MPU-6050 gives an accurate position and movement data via the standard I2C protocol making it simple to add to your project.

Voltage : 3-5VDC

Gyroscope Range 250 500 1000 2000 / s

Acceleration Range : 2 4 8 16g 

Size 22x16mm

Barometric pressure sensor module for Arduino and other microcontroller projects

Double Rectifier. Octal Base 5-Pin Valve / Tube by JJ