Search Results

Monacor LSIP-150/1 1.5mH High Quality Air-Core Inductor

Air core coil, 1.5mH Medium wire thickness (1 mm), for general applications, for constructing high-quality crossover networks of high-power rating.

Nominal Inductance: 1.5mH
Power rating: 150W
Wire diameter: 1mm
DC resistance: 0.65Ω
Dimensions: 59mm (d) x 19mm (h)

Datasheet can be found in the "Files" tab

Nintendo Switch Pro Controller replacement hall effect joystick

  If your Nintendo Switch Pro controller has a mind of it's own (stick drift) or has physical damage to a joystick then don't just buy a new one, fix it. These new "hall effect" replacement joysticks work with tiny magnets and a magnetic strength sensor to replace the old style metal contact moving over a carbon track type. Replacing your old joystick with one of these will not only get it working properly again but make it better than when it was new with stick drift being a thing of the past.

• High Precision Control - Experience high-response accuracy with our hall effect joysticks, designed without the common issues of carbon film joystick jitter. The enhanced
  sensitivity of the Hall effect sensor provides an unmatched control precision, perfect for FPS shooters and any game demanding fine-tuned input
• No "Stick Drift" thanks to Hall effect magnetic technology
• Durable and  Reliable - hall effect technology eliminates physical contact preventing wear and tear and ensuring longevity

9.5mm 20 Turn Precision Cermet Preset Top adjust. 200K ohms

TS808 Tube Screamer Guitar Pedal Kit

This kit is based on the most iconic overdrive pedal ever, the Tube Screamer TS-808. Our version comes with a true-bypass 3PDT footswitch & daughterboard so your signal passes straight through the pedal when it is not engaged in order to preserve your tone. Using high-quality components, this pedal is less noisy and more reliable than the original (when assembled correctly).

As with the original, the three knobs allow you to control the Overdrive amount, output Level and the Tone. The Tone knob changes the peak frequency from ~220Hz (at 0%) to 1.1kHZ (at 100%) with approx. 6db/octave roll-off. In order to save battery life, the input jack is wired so the pedal turns off if the jack is unplugged while the pedal is powered by battery only. 

This PCB will fit nicely in a 1590B (G150) enclosure without the battery, or in a 1550D (G111) with a battery.

Please note: this kit comes with a Texas Instruments NE5532AP opamp; let us know if you want us to send a RC4558 opamp instead.

PCB Dimensions: 69.5mm x 53mm

Included in this kit:
1kΩ ¼W carbon resistor x 4
510kΩ ¼W MF resistor x 2
10kΩ ¼W carbon resistor x 9
51kΩ ¼W MF resistor x 1
4.7kΩ ¼W carbon resistor x 1
220Ω ¼W carbon resistor x 1
1MΩ ¼W carbon resistor x 1
22nF boxpoly capacitor x 1
1μF boxpoly capacitor x 2
47nF boxpoly capacitor x 1
51pF ceramic disk x 1
220nF boxpoly capacitor x 2
100nF boxpoly capacitor x 1
10μF 25V electrolytic capacitor x 1
100μF 25V electrolytic capacitor x 1
47μF 25V electrolytic capacitor x 1
100nF ceramic capacitor x 1
1N4148 signal diode x 2
1N4007 rectifier diode x 1
2SC1815Y NPN bipolar transistor x 2
NE5532 dual operational amplifier x 1
8 Pin IC socket x 1
5mm green LED x 1
100kΩ logarithmic 9mm potentiometer x 1
500kΩ logarithmic 9mm potentiometer x 1
50kΩ linear 9mm potentiometer x 1
6.3mm stereo chassis socket x 1
6.3mm mono chassis socket x 1
2.1 x 5.5mm DC chassis socket
PP3 hard plastic battery snap x 1
Main PCB x 1
Footswitch Daughterboard PCB x 1
3PDT Footswitch x 1
Hookup wire, 5 various colours
6mm LED Spacer
Instructions & BOM x 1

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (optional - only needed if you want to drill an enclosure)
•  Wire stripper (optional, but recommended)

Double Triode Medium Gain. B9A Base. Go to ECC81 (Same valve as 12AT7 with UK number)

Double Triode Low gain. B9A Base. Go to ECC82 (Same valve with UK number).

4.7µF 160V Radial Electrolytic 105°C High Temperature, Low Leakage, Tolerance ±20%

Pitch : 2.54mm

Diameter : 6.5mm

Height : 11.5mm

Although we try to keep the specifications/images up to date, they may change without notice.

Double Triode high gain. B9A Base. Go to ECC83 (Same valve with UK number).

Double Triode. High Gain. B9A 9 pin Base. Please go to ECC83 (12AX7A)

Double Triode high gain. B9A Base 9-Pin Valve. Please go to 7025 (ruggedised)

Log Control Pot 24mm with 6mm x 30mm round spindle with flat part 2.2Meg Log 20% 0.25W

5881 Beam Tetrode. Octal Base 7-Pin Valve / Tube by JJ (previuosly known as Tesla)

5U4G Double (Full-Wave) Rectifier. Octal Base 5-Pin Valve / Tube. High Quality JJ 

Svetlana l 6550C High Quality Beam Pentode. Octal Base 8-Pin Valve / Tube. 

Beam Tetrode by ELECTRO HARMONIX. Octal Base 8-Pin Valve. Rugged version.

Metallised Polypropylene Film. 2000VDC 400VAC FKP1/MKP375 or equivalent. 15mm pitch. 10nF (0.01uF)

1.25A. 32mm Glass Quick Blow Fuse. In pack of 10.

Polystyrene Capacitor Axial 160VDC Tolerance +/- 2.5%. Excellent stability 100pF

12 Way Euroblock (Phoenix-type) female terminal connector

Pitch: 3.81mm

Max Current 8A.

Max Voltage 300V

Wire Gauge: 16-28 AWG 

12 Way Euroblock (Phoenix-type) male PCB mount connector

Pitch: 3.81mm

Max Current 8A.

Max Voltage 300V

12 Way Euroblock (Phoenix-type) female terminal connector

Pitch: 5.08mm

Max Current 10A.

Max Voltage 300V

Wire Gauge: 12-24 AWG 

12 Way Euroblock (Phoenix-type) male PCB mount connector

Pitch: 5.08mm

Max Current 10A.

Max Voltage 300V

16mm Single Control Pot with knurled & Slotted 6mm dia spindle. 10K Log

PCB Pins 5mm spacing. 

Spindle length 20mm

2.5A. 32mm Glass Anti Surge Fuse. In pack of 10.

Lead joining 2 RCA Phono Plugs  to 2 x 3 pin XLR Female Line Sockets (Latching) using High Quality Screened Cable 6 metres Long

A durable, high quality, shielded audio lead with pro quality, die-cast XLR male connectors and RCA plugs, offering exceptional sound and reliability. Made with twinned high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.

680pf Surface-mount 0805 ceramic capacitor 50V 5%.

Sold in packs of 10.

Double Triode.Valve.  Please go to equivalent ECC83

8200pF, 8.2nF, 0.0082uF Boxed Polyester Film Capacitor 5mm Pitch 63VDC 5% Tolerance