Opto Coupler. Emitter 5V 100mA max, Detector 80V 100mA max. 6DIL

Opto Coupler. In: 6V 60mA, Out: 50V 40mA. CTR: 40% min. No Base 6DIL

OPTOISOLATOR No base. In: 5V 100mA max. Out: 50V 100mA max 40% min. 6DIL

OPTOISOLATOR In: 5V 100mA max. Out: 50V 100mA max. 40% min. 6DIL

OPTOISOLATOR In: 5V 60mA. Out 32V 50mA. 100% min. Isolation Voltage: 3.75KVAC 6DIL

OPTOISOLATOR 63% min No base 6DIL

OPTOISOLATOR 100% No base 6DIL

OPTOISOLATOR 5PIN

OPTOISOLATOR 6DIL

OPTOISOLATOR High Insulation 3mm thick. 1000Vrms. 32V 50% min. 5uS 4PIN THICKPACK

Opto Sensor Reflective 32V 1.5% 4pin

4 Opto Isolators in16DIL package

OPTOISOLATOR 160% min 6DIL

Adaptor: Coax (TV aerial) socket (female) to F (Satellite or Cable TV) socket. All metal. Joins a Coax Plug to and F Plug.

Adaptor: Coax (TV aerial) socket (female) to F plug (male). Fully Screened.Nickel Plating

Full sized Superb Full Frequency Range, HiFi Comfort Padded Headphones

In-line volume control & 40mm Drivers for deep bass sound. Ideal for the discerning listener, giving superb clear tops and mids.

2 Metre Oxygen-free Copper Litz wire lead with gold pated 3.5mm/6.3mm jack-plugs.

Frequency Response 20Hz to 24KHz, 102db @ 1KHz.

500mW Output

40mmØ drivers deliver a deep bass sound

Adjustable padded headband and earcups for added comfort

Single side cable entry

Compact Dual UHF Microphone Sets

High Quality and Reliable TV & Monitor Trolley Stand for 32" to 65" TVs and Monitors

• Quick release height adjustment and toolless tilt feature
• Heavy-duty casters with locking mechanism
• Integrated cable management keeps cables concealed and organized
• Height adjustable accessory shelf
• Installation hardware included

 5M IP65 Weatherproof RGB LED tape kit

AV to HDMI converter

Upscales standard Definition video & audio to HD (HDMI) to 720P or 1080P (Switchable).

Connects older equipment without a HD output to a modern HD TV.

USB powered. 

Supported Inputs: NTSC 480i or PAL 576i

Selectable Outputs: 720P or 1080P

Package Contents
HDMI converter
USB cable

Composite Video to VGA Converter
Converts a Composite (TV) signal to VGA signal with phono (RCA) outputs (BNC adaptor available see BPP). VGA output resolutions up to 1920x1080. Small size, powered from a USB socket it can connect to HD CCTV,  PCs, etc. 

*  Pure hardware design,  just Plug & Play
*  No software driver requirement.
*  Supports VGA resolutions 640x480 at 60 fps; 800x600 60 fps, 75 fps; 1024x768 60 fps, 75 fps; 1280x720 at 60 fps; 1280x768 60 fps, 75 fps; 1280x1024 60 fps, 75 fps; 1360x768 at 60 fps; 1400x1050 60 fps; 1440x900 60 fps; 1680x1050 at 60 fps; 1600x1200 60 fps; 1920x1080 60 fps resolutions.
*  Inputs: Composite Video and Stereo Audio (RCA), and USB (power)
*  Outputs: VGA, 3.5mm line out
*  Powered from USB port
*  PAL or NTSC system

Package contents:
Composite to VGA converter
Manual
USB Power cable

Compressed Air Duster Spray 300ml 

Produces a powerful air based spray, for blowing away dust and contaminants. Ideal for electronics,workspaces, benches, keyboards, computers & allied products. Avoids contamination from smears.  

Also good for general purpose uses, inc photographic, mechanics, clock mechanisms, models etc.

For use in difficult-to-reach areas.

Chemically pure, no residue is left behind

100 Watt Comprossion Horn Driver - 200W max 100W rms

Reflector horn with 1inch throat, and1¾ inch thread.

Should be connected through a cross-over or capacitor approx 3.3uF bipolar

*  Titanium diaphragm
*  Kapton bobbin
*  Copper clad aluminium voice coil
*  Gold plated spring terminals

Impedance: 8 ohms
Frequency Response: 1500Hz-20000Hz
Diameter: 90mm
Length: 63mm

15 oz Magnet
Power: 100 WattsRMS, 200W Max
SPL @ 1W/1m : 95dB

*  Titanium diaphragm
*  Kapton bobbin
*  Copper clad aluminium voice coil
*  Gold plated spring terminals

Impedance: 8 ohms
Frequency Response: 1000Hz-20000Hz
Diameter: 115mm
Length: 70mm
25 oz Magnet
Power: 150 WattsRMS, 300W Max
SPL @ 1W/1m : 95dB

High quality screw on compression driver. Ideal for use both as a replacement driver or for OEM projects.

High frequency driver for reflector horns fitted with 1inch throat This driver should be connected via a cross-over or Capacitor.
 

Dimensions         98x 51x98mm

Net weight            0.95Kg

Coil Size               25mm   

Freq Response 800-20000

Impedance           8

Magnet Weight      17oz (0.47 kg)

Peak Power          80W

Power RMS           40W

Sensitivity            94dB

70 Watt HF Compression Driver (Tweeter) with 1 inch throat titanium diaphragm 
Max Power:  70W
RMS Power: 30W
Freq Response: 800Hz to 20KHz
Voice Coil: 35mm
Dims: 63 x 100mm

Also used extensively as replacement in several HF horn drivers such as QTX Sound QR12 (178.212UK), QR15 (178.213UK), QS12 (178.562UK), QS12A,  (178.565UK), QS15 (178.568UK) and QS15A

High quality screw on compression driver. Ideal for use both as a replacement driver or for new projects.

High frequency driver for reflector horns fitted with 1 3/8inch throat This driver should be connected via a cross-over or Bipolar Capacitor in the range of 2.2uF to 10uF depending on frequency range required. (see our Alcap Range)
 

Dimensions         81x 126x120mm

Net weight            1.6Kg

Coil Size              50mm   

Freq Response  500-20000Hz

Impedance           8 ohms

Magnet Weight     30oz (0.85 kg)

Peak Power          140W

Power RMS           70W

Sensitivity            94dB