0
£0.00
Products Map
Mega Bright Yellow Water Clear 5mm LED 20,000mcd
Y5B
|
Yellow LED 5mm Seriously Bright Water Clear LED 20,000mcd. 2.2V forward, 50mA max, 590nM |
£0.45
(inc VAT £0.54)
Mercury 130.030 TV Aerial Distribution Amplifier Booster with 2 outputs and 4G Filter
AMD02
|
2-Way TV & Radio Distribution Booster Amplifier - with 4G Filter Built in 4G LTE filter, designed to improve the audio and video quality by amplifying weak VHF/UHF signals and distributing them across a designated area. Suitable for both professional and domestic systems.
|
£19.75
(inc VAT £23.70)
Mercury 130.031 TV Aerial Distribution Amplifier Booster with 4 outputs and 4G Filter
AMD04
4-way TV & Radio Distribution Booster Amplifier - with 4G FilterBuilt in 4G LTE filter, designed to improve the audio and video quality by amplifying weak VHF/UHF signals and distributing them across a designated area. Suitable for both professional and domestic systems.
|
£25.75
(inc VAT £30.90)
mercury 2/6/12V 600mA Lead Acid Battery Charger
CLA6
|
Mercury 2/6/12V 600mA Lead Acid Battery Charger
For charging 2 Volts, 6 Volts and 12 Volt batteries
Automatically stops charging when battery is full
Short circuit protection
Reverse polarity protection
​Input voltage AC100-240V @ 60/50Hz Max. current 600mA
Output voltage 2, 6 &12V
Lead length 1.8m
Dimensions 82 x 56 x 80mm
Weight 125g
|
£12.50
(inc VAT £15.00)
Mercury Multimeter and Transistor Tester with beep, square wave & case
MTB01
|
Mercury Digital Multimeter & Transistor Tester plus Square Wave, Beep - in a Protective Case
This multimeter offers 19 test ranges and 7 functions
AC voltage: 200 - 500V |
£9.50
(inc VAT £11.40)
Mercury Professional Digital Multimeter with 32 Ranges
MTM01
Mercury Professional Digital Multimeter with 32 Ranges
A full sized and accurate multimeter with mutiple functions with shock-proof case.
|
£16.00
(inc VAT £19.20)
Mercury Spare Soldering Iron for SL30C Soldering Station
SIR30
|
Spare Soldering iron for SL30C Temperature Controlled Soldering Stations.
|
£10.50
(inc VAT £12.60)
Mercury Switchable Soldering Iron 130 or 20 Watts with Stand
SS132
Mercury Switchable Mains soldering iron with a high temperature ceramic element for fast heating2 Wattage settings of 130W and 20W allows both standard and delicate soldering. Holding the switch gives you a boost of power when you need it and the standard 20W setting helps stability and long life. Fitted with a high power switch, 1.2m cable with sealed mains plug. Comes with small stand.
|
£11.00
(inc VAT £13.20)
Mercury tilt switch module for Arduino KY-017
KY017
Mercury tilt switch module for Arduino and other microcontroller projects
This module has a small glass bead with a ball of mercury in it that will either make or break a contact if it is tilted. It also has a surface mounted LED that can be connected to iluminate when the switch is activated.
Voltage : 3.3 to 5VDC
Size 19x15mm
|
£2.50
(inc VAT £3.00)
Metal touch sensor module for Arduino KY-036
KY036
Metal touch sensor module for Arduino and other microcontroller projects
This module uses a darlington NPN transistor and a comparator to detect when the base of the transistor (or what you connect it to) gets touched.It will give a digital output as well as an analogue output and it has potentiometer to adjust the sensitivity for the digital output.
Voltage : 5VDC
Size 36x16mm
|
£2.50
(inc VAT £3.00)
Methane gas sensor module for Arduino MQ-4
MQ4
Methane gas sensor module for Arduino and other microcontroller projects
This module has a sensitive methane sensor that will detect levels of methane in the air. The sensor outputs a varying voltage on the analogue pin depending on the level of methane and it has a comparator to give you a digital out at when the methane level reaches a certain level, this can be set with the built in potentiometer.
Please note, this sensor needs to warm up for 20 seconds before it will give a stable reading.
Voltage : 5VDC
Current : 150mA
Sensitivity : 300 to 10000ppm
Size 32x21mm
|
£2.50
(inc VAT £3.00)
£5.50
(inc VAT £6.60)
£0.25
(inc VAT £0.30)
£0.25
(inc VAT £0.30)
£0.80
(inc VAT £0.96)
Mica for TO264, TO-3PL Transistors
K264
|
Mica Washer for TO264, TO-3PL (Large TO3 plastic) Package Transistors |
£1.50
£0.85
(inc VAT £1.02) 43% Off
Micro USB SMD Socket PCB Mounting Type 1
USBU1
|
Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts. |
£1.00
(inc VAT £1.20)
Micro USB SMD Socket PCB Mounting Type 2
USBU2
|
Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts. |
£1.00
(inc VAT £1.20)
Micro USB SMD Socket PCB Mounting Type 3
USBU3
|
Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts. |
£1.00
(inc VAT £1.20)
Micro USB SMD Socket PCB Mounting Type 4
USBU4
|
Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts. |
£1.00
(inc VAT £1.20)
Micro USB SMD Socket PCB Mounting Type 5
USBU5
|
Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts. |
£1.00
(inc VAT £1.20)
Micro USB SMD Socket PCB Mounting Type 6
USBU6
|
Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts. |
£1.00
(inc VAT £1.20)
Microphone Desk Stand with Boom with Heavy Base
MDB45
|
MIc Desk Stand with Boom - Heavy Stable Base Microphone desk stand with boom arm. Heavy 130mmØ cast iron base with two piece telescopic stem fitted and a fully adjustable boom arm.
|
£15.75
(inc VAT £18.90)
Microphone Holder for Standard Microphones (45mm 2 inch)
MAV
High Performance Microphone Holder for Standard Microphones (45 mm 2 inch).
With soft felt liner for a scratch-free grip. With standard anti-vibration features for improved quality.
Easy Screw on Adaptor
Ideal for Many Popular Studio Microphones
Depth: 120mm
Height: 80mm
Width 100mm
Product Dimensions: 80x100x120mm
Net weight; 200g
Colour: Black
Diameter 45mm (2")
|
£10.75
(inc VAT £12.90)
Microphone Holder with 5/8" Thread
MICF
|
Microphone Holder with 5/8" Thread |
