Products Map

Heavy-Duty True Bypass 3PDT Footswitch

This 3 pole changeover footswitch is a great cost effective switch for use in guitar pedals and similar projects requiring a rugged foot operated switch. It has a firm latching action (Press on then press off). It has the standard 9 pin footprint for a footswitch and is pin compatible with our footswitch daughterboard as well as many others.

Dimensions: 17.2x 19.5 x 42.5mm (inc. pins)

Fixing hole: 12mm diameter

NMOS 4 Pin Dual Gate 20V 25mA

NMOS TO72 Dual Gate 22V 35mA

NMOS RPAK 4 Pin Dual Gate 20V Idss=3mA

NMOS TO50 Dual Gate 20V 25mA

3uF 450VAC Polypropylene Motor Run/Motor Start Capacitor 

6.3mm Lucar tags & Stud Mount. 50-60Hz. Self extinguishing case and cover. 

Tolerance ± 5%

Dimensions 30 x 57mm

4 Way Ceiling Speaker System - 2 x 200W

Fully featured, easy to install 4 speaker system with Bluetooth, media player, microphone and line audio input. Featuring 4 high quality, rubber surround ceiling speakers with ferrofluid-cooled adjustable silk dome tweeters for a high quality HiFi listening experience. These speakers have a high dispersion angle (155°), which helps distribuite sound over a large area without the need for additional speakers. 

This package includes: 4 x Adastra C6D ceiling speakers,  1 x Adastra A2 Mixer-Amp and 100 metres of white speaker cable. 

All our systems are bespoke; they are not pre-boxed kits; just phone 020 8452 0161 if you wish to change anything. 

Features: 

• Easy to install

• Built-in tone control allows you to tailor the sound to your taste and listening environment

• Microphone, USB, SD, Bluetooth, AUX and Line inputs make it easy to connect to your sound source

• USB and SD inputs can be controlled via the remote control

• HiFi ceiling speakers provide excellent audio quality, unlike many other ceiling speakers

• Input selector switch allows you to change the sound input without unplugging cables
   

Technical Specifications:

Amplifier: 

• Output power RMS @ 4Ω : 2 x 200W
• Amplifier class: Class D
• Microphone inputs: 2 x 6.3mm (1/4") mono jack
• Line inputs: 4 x RCA sockets (Line 1 &2 ) + 2 x 6.3mm (1/4") mono jacks
• Line input sensitivity: 0.775V_RMS
• AUX input: 3.5mm (1/8") stereo jack
• AUX input sensitivity: 0.48V_RMS
• Bluetooth version: 2.3
• Line output: 2 x RCA
• Speaker outputs: 4 x 4mm binding posts
• FM Antenna connection: F-type socket
• THD + N: < 0.1%
• Output controls: Source select, bass, treble, Ch1, Ch2
• Input controls: Aux, Media, Line1, Line2, Mic1, Mic2, Talkover
• Protection: Thermal, over-current, over-voltage, short-circuit
• Dimensions: 482 x 260 x 88mm
• Weight: 5.21kg
• Fuse: F5A, 250V 

Speakers:

• Power Max.: 100W
• Impedance: 8Ω
• Sensitivity @ 1W/1m: 85dB(±2dB)
• Cutout: 193mm dia.
• Mounting depth: 79mm
• Dimensions: 93 x 227mm 
• Frequency response: 60Hz - 20kHz

4 Channel Bidirectional Logic Level Converter

The logic level converter is a device that allows you to connect 5V logic systems to 3.3v systems and vice versa. This converter is very easy to set up: simply power this device up using 5V (marked HV), 3.3V (marked LV) and ground (marked GND). You can then convert up to 4 different signals using the pads marked LV1-5 and HV1-5. 

Set of 4 Steel Speaker Clamps, 4 Steel Cage Nuts & 4 Long Steel Screws

Set of 4 Hard Plastic Speaker/Speaker Grill Clamps.

4 inch 15W RMS Genarl Purpose Hifi Mylar 8 ohm Speaker

100mm dia with mylar cone & ferrite magnet. ohms

Frequency Response (Hz): 210Hz -7KHz

Dimensions (mm): 103 x 103 x 40mm

Resonant Frequency (Hz): 120

30W Max

4" (100mm) 8 ohm Paper Cone HI-FI WOOFER with Foam Edge
Excellent Small Bass speaker 20 Watt Max with Paper Cone.

*  Impedance: 8 Ω  
*  Sensitivity: 82dB
*  Peak Power: 20W
*  RMS Power: 10W
*  Freq Response: 50Hz-8KHz
*  Dimensions: 59x105x105mm
*  Weight: 660gm
*  Resonant Frequency: 70Hz
*  Magnet Weight: 283gm
*  Resonant Frequency: 70Hz
*  Magnet Weight: 283gm
*  Dimensions: 59x105x105mm
*  Weight: 660gm
*  Resonant Frequency: 70Hz
*  Magnet Weight: 283gm
*  Resonant Frequency: 70Hz
*  Magnet Weight: 283gm

High Quality Coax Lead (Fly-lead). Coax plug - Coax plug Fully screened 75 ohm cable 4 metres long

TV Aerial Lead Fly Lead

Mutliway Chassis/Panel Plug. (Yaesu style Microphone Plug). 4ways. Fits YL400 Connector

DIN chassis socket 4 pin

4 pin DIN plug, Nickel plated pins, fully screened with plastic handle & cable sleeve.

XLR 4 pin chassis plug (male)

XLR 4 pin chassis socket with latch

DELTRON XLR 4 way Female line socket with latch.

Superior Quality XLR  with Zinc body and silver over nickel plated contacts

Rotary Switch. Make before break4 pole 3 way

Adjustable stop lock-washer under bush allows 2-3 ways.

110VAC 350mA max. 9mm dia bush 6.3mm x 38mm shaft with flat.

Body dia 26mm

3.5mm Stereo Jack-plug 4 pole plug. (Tip Ring, Ring Sleeve) Soft Plastic Body with Flexible Cable Protector

Neutrik NL4FXX-W-S Standard 4 Pole Speakon Cable Connector

Standard Neutrik NL4FXX-W-S Speakon connector.