Products Map

2 Watt 5% Carbon Film Resistor 56K ohms

9-10 Watt 5% Wire-wound Resistor 56K ohms

14 Watt 5% Wire-wound Resistor 56K ohms

56nF, 0.056uF Boxed Polyester Film Capacitor 5mm Pitch 63VDC 5% Tolerance

Polystyrene Capacitor Axial 160VDC Tolerance +/- 5%. Excellent stability 56pF

Ceramic Disc 63VDC 5% 2.5mm spacing 56pF

Radial Electrolytic 85 deg C. 56uF 16V

Radial Electrolytic 85 deg C. 45uF 25V

Axial Miniature Inductor/RF Choke, Tolerance 10% 56uH

5881 Beam Tetrode. Octal Base 7-Pin Valve / Tube by JJ (previuosly known as Tesla)

5A. 32mm Glass Anti Surge Fuse. In pack of 10.

Axial Wire Ended Fuse. Very Quick Blow. 250V max. Body: 2.5x7mm. 5A

5A. 25mm (1") Ceramic Mains Fuse to BS1362 standard. 

Supplied in packs of 10

5A. 32mm Glass Quick Blow Fuse. In pack of 10.

Radial Fuse 5mm pitch. Anti Surge. 8.5x4mm body. Sold in singles. 6.3A

NTC 5mm Disc Thermistor. Increase in temperature lowers resistance. 3.5mm pitch. Long leads. 5K@100C - 100K@25C.

NTC 5mm Disc Thermistor. Increase in temperature lowers resistance. 3.5mm pitch. Long leads. 90R@100C - 1K@25C.

NTC 5mm Disc Thermistor. Increase in temperature lowers resistance. 3.5mm pitch. Long leads. 1K@100C - 20K@25C.

NTC 5mm Disc Thermistor. Increase in temperature lowers resistance. 3.5mm pitch. Long leads. 300R@100C - 5K@25C.

AHD input to HDMI Video Output Converter

This unit converts AHD/CVI/TVI/CVBS video from a CCTV camera (up to 5MP) to standard HDMI video.

Ideal for connecting a standard CCTV camera directly to a TV or monitor, without the need for a DVR.

The converter also has a BNC output, allowing you to connect a camera to a screen as well as a DVR

Resolutions Supported

CIF, D1, 1MP, 2MP, 5MP

Package Contents:
HDMI converter
Manual
USB cable

Polystyrene Capacitor Axial 5000VDC (5KV)  Tolerance +/- 20%. Excellent stability 1nF (1000pF)

5RC5 SCR DO4 50V 7A Stud Mount

5U4G Double (Full-Wave) Rectifier. Octal Base 5-Pin Valve / Tube. High Quality JJ 

5V relay module for Arduino and other microcontroller projects

Pololu 1.5A 5V Step Up/Down Voltage Regulator

5V UPS Uninterruptible Power Supply 15W 3A 

This UPS makes a great add on to any project that you want to add an always on level of safety. It also works great for a project you want to run off a rechargeable battery or USB, this UPS has everything built in so you don't need to use a USB charging PCB, a boost converter, a BMS and a battery holder.

• Automatic seamless switching to battery power in case of power failure
• Over charge battery protection
• Over discharge battery protection,
• Overtemperature battery protection
• Overcurrent battery protection
• Battery status Led

UPS output: Terminals marked UPS+ (positive)  and UPS- (ground))

Use with USB power OR external power input (Terminals marked 5V+ (positive) and 5V- (ground))

Use with 1 or 2 x 18650 batteries or with external 3.7V lithium batteries 

Available also with 9V and 12V output

5W Guitar Valve Amplifier Kit - Fender 5F1 Champ Style   

  This is our take on the famous Fender Champ Guitar Amp from the 50s. It offers a beautifully rich, creamy sound with a lovely warm bass and mid response that you can only get from a valve amp. When we tested this kit for the first time it's sound surpassed all of our expectations and we are all super excited to share this experience with you. 

  Using a high voltage DC-DC boost converter instead of the conventional power transformer and rectifier valve, this amp kit is lighter, smaller and more cost effective without compromising on the performance. Since the boost converter requires only a 12V DC input, this amp can also be used on the go, and can even be powered by 12V batteries. Our design also includes a cathode bypass capacitor on the first triode gain stage to increase the gain, this is a common modification done to the original amp and we think this makes it sound better. If you want the original sound this capacitor can be omitted.

This amp comes with new old stock Soviet Reflektor 6П6С beam tetrode output valve and JJ ECC83 double-triode.

We recommend using a 12V power supply that can supply at least 5A like this one BSM1250. 

The following components are included in this kit:

• Step by step instruction manual
• 68kΩ ½ Watt carbon film resistor x 1
• 1MΩ ½ Watt carbon film resistor x 1
• 1MΩ 16mm logarithmic potentiometer x 1
• 1.5kΩ ½ Watt carbon film resistor x 1
• 100kΩ ½ Watt carbon film resistor x 1
• 22kΩ ½ Watt carbon film resistor x 1
• 10kΩ ½ Watt carbon film resistor x 1
• 220kΩ ½ Watt carbon film resistor x 1
• 470Ω ½ Watt carbon film resistor x 1
• 270Ω 0.4 Watt metal film resistor x 1
• 1.1kΩ 0.4 Watt metal film resistor x 1
• 1kΩ ½ Watt carbon film resistor x 1
• 22nF 305V polypropylene capacitor x 1
• 8µF 450V axial electrolytic capacitor x 1
• 16µF 450V axial electrolytic capacitor x 1
• 22µF 35V tantalum capacitor x 1
• 100nF 50V multi-layer ceramic capacitor x 1
• 1µF 50V multi-layer ceramic capacitor x 1
• 1.5µF 35V tantalum capacitor x 1
• 6V6GT or 6П6С beam tetrode valve (Reflektor - Soviet) x 1
• ECC83 or 12AX7 double triode valve (JJ - Slovak) x 1
• LM317T 1.5A adjustable voltage regulator x 1
• 6.3mm PCB-mount switched jack socket x 1
• 6.3mm panel-mount switched jack socket x 1
• 2.1 x 5.5mm DC socket x 1
• 5mm red LED x 1
• B9A PCB-mount valve base x 1
• Octal PCB-mount valve base x 1
• High voltage DC-DC step up boost converter x 1
• 5F1 Output transformer x 1
• 10A SPST toggle switch x 1
• 1 foot of 6A double core power cable x 1
• 1 foot of 42 strand speaker cable x 1
• 1 foot of high voltage power cable x 1
• Finned heatsink x 1
• PCB screw terminal x 1
• M3 nut and bolt x 1
• Heatsink thermal pad & bush x 1
• PCB x 1

To assemble this kit, you will need the following tools:

• Soldering iron
• High quality solder
• Side cutters
• Cable stripper

 This kit will fit nicely in a G116 enclosure (Hammond 1550G).