Products Map

2 Watt 5% Carbon Film Resistor 12M ohms

Miniature 12 X 12mm tactile switch. 4mm Profile Button

Miniature 12 X 12mm tactile switch. Short Button

12nF, 0.012uF Boxed Polyester Film Capacitor 5mm Pitch 63VDC 5% Tolerance

Polystyrene Capacitor Axial 160VDC Tolerance +/- 10%. Excellent stability 12pF

Ceramic Disc 63VDC 5% 2.5mm spacing 12pF

12uF 450VAC Polypropylene Motor Run/Motor Start Capacitor 

6.3mm Lucar tags & Stud Mount. 50-60Hz. Self extinguishing case and cover. 

Tolerance ± 5%

Dimensions 40 x 71mm

Axial Miniature Inductor/RF Choke, Tolerance 10% 12uH

MES 11mm (10mm) Round Indicator Filament Lamp 12V 100mA.

MES 11mm (10mm) Tubular Indicator Filament Lamp 12V 100mA

Mini Wedge Lamp 5mm dia. Side connections. 12V 100mA

SUNON High Quality Electronic Cooling Fan 12VDC 40x40x10mm 5.6CFM 1.08W 6000RPM.

Noise less than 24dB

Long Red & Black Wires

SUNON High Quality Electronic Cooling Fan. 12VDC 40x40x20mm 6.5CFM 65mA 6000RPM Noise <25.5dB

Red & Black wires (not shown)

SUNON High Quality Electronic Cooling Fan. 12VDC 80x80x25 33CFM 220mA. 2800RPM. Noise 28dB

Miniature Incandecent Lamp 12V80mA

3mm Diameter with 125mm long insulated wires

Uses include indicator and signal display in electronics and model construction

12V 80mA. LES Miniature Lamp. 5mm dia

SUNON High Quality Electronic Cooling Fan. 12VDC 92x92x25mm 51CFM 140mA. 3000RPM. Noise <34dB

Datasheet can be found HERE.

High Quality Switchmode Regulated Desktop Plug In) Power Supply. 12VDC (Single Voltage) 2A 

5.5 x 2.1mm (Centre Positive) plug on the output.

Many Uses. Great for most CCTV Systems for Cameras up to a total of 2 Amps

Switchmode Flat (Regulated) Power Supply. 12VDC (Single voltage) 5 Amps.

Complete with mains lead with 3 pin UK mains plug

Now built with interference filters

5.5 x 2.1mm (Centre Positive) output plug. 

Suitable for most CCTV Systems, cameras and anyhthing that uses 12VDC up to 5 amps

12V UPS Uninterruptible Power Supply 15W 3A 

This UPS makes a great add on to any project that you want to add an always on level of safety. It also works great for a project you want to run off a rechargeable battery or USB, this UPS has everything built in so you don't need to use a USB charging PCB, a boost converter, a BMS and a battery holder.

• Automatic seamless switching to battery power in case of power failure
• Over charge battery protection
• Over discharge battery protection,
• Overtemperature battery protection
• Overcurrent battery protection
• Battery status Led

UPS output: Terminals marked UPS+ (positive)  and UPS- (ground))

Use with USB power OR external power input (Terminals marked 5V+ (positive) and 5V- (ground))

Use with 1 or 2 x 18650 batteries or with external 3.7V lithium batteries 

Available also with 5V and 9V output

12VA 12+12V. Clamp type Laminated Transformer.

Single Primary of 230V & 2 Secondaries.

Put secondaries in parallel for full current or series to double voltage.

Size W45xH45xD45mm FC68mm.

12VA 15+15V. Clamp type Laminated Transformer.

Single Primary of 230V & 2 Secondaries.

Put secondaries in parallel for full current or series to double voltage.

Size W45xH45xD45mm FC68mm.

12VA 6V + 6V. Clamp type Laminated Transformer.

Single Primariy of 230V & 2 Secondaries of 6V each

Put secondaries in parallel for full current or series to double voltage.@ half the current

Size W60xH50xD47mm FC74mm.

2VA 9V + 9V. Clamp type Laminated Transformer.

Single Primary of 230V & 2 Secondaries.

Put secondaries in parallel for full current or series to double voltage.

Size W45xH45xD45mm FC68mm.

13 Way Header Socket, 2.54mm Pitch

1 row of 13 pins 2.54mm (0.1") Pitch

Metal Film Resistor 1% Tolerance 1/4W 250V max 130 ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 130K ohms. 10 pack

13A. 25mm (1") Ceramic Mains Fuse to BS1362 standard. 

Supplied in packs of 10

Metal Film Resistor 1% Tolerance 1/4W 250V max 13K ohms. 10 pack