Products Map

SUNON High Quality Electronic Cooling Fan. 12VDC 80x80x25 33CFM 220mA. 2800RPM. Noise 28dB

Miniature Incandecent Lamp 12V80mA

3mm Diameter with 125mm long insulated wires

Uses include indicator and signal display in electronics and model construction

12V 80mA. LES Miniature Lamp. 5mm dia

SUNON High Quality Electronic Cooling Fan. 12VDC 92x92x25mm 51CFM 140mA. 3000RPM. Noise <34dB

Datasheet can be found HERE.

Switchmode (Regulated) Power Supply. 12VDC (Single voltage) 10 Amps.

Now with integrated interference filters

Screw terminal input/output

Input voltage: 110-220V AC
Output voltage: 12V DC
Max. output current: 10A
Dimensions: 159mm (L) x 97mm (W) x 38mm (H)

High Quality Switchmode Regulated Desktop Plug In) Power Supply. 12VDC (Single Voltage) 2A 

5.5 x 2.1mm (Centre Positive) plug on the output.

Many Uses. Great for most CCTV Systems for Cameras up to a total of 2 Amps

Switchmode Flat (Regulated) Power Supply. 12VDC (Single voltage) 5 Amps.

Complete with mains lead with 3 pin UK mains plug

Now built with interference filters

5.5 x 2.1mm (Centre Positive) output plug. 

Suitable for most CCTV Systems, cameras and anyhthing that uses 12VDC up to 5 amps

12V UPS Uninterruptible Power Supply 15W 3A 

This UPS makes a great add on to any project that you want to add an always on level of safety. It also works great for a project you want to run off a rechargeable battery or USB, this UPS has everything built in so you don't need to use a USB charging PCB, a boost converter, a BMS and a battery holder.

• Automatic seamless switching to battery power in case of power failure
• Over charge battery protection
• Over discharge battery protection,
• Overtemperature battery protection
• Overcurrent battery protection
• Battery status Led

UPS output: Terminals marked UPS+ (positive)  and UPS- (ground))

Use with USB power OR external power input (Terminals marked 5V+ (positive) and 5V- (ground))

Use with 1 or 2 x 18650 batteries or with external 3.7V lithium batteries 

Available also with 5V and 9V output

12VA 12+12V. Clamp type Laminated Transformer.

Single Primary of 230V & 2 Secondaries.

Put secondaries in parallel for full current or series to double voltage.

Size W45xH45xD45mm FC68mm.

12VA 15+15V. Clamp type Laminated Transformer.

Single Primary of 230V & 2 Secondaries.

Put secondaries in parallel for full current or series to double voltage.

Size W45xH45xD45mm FC68mm.

12VA 6V + 6V. Clamp type Laminated Transformer.

Single Primariy of 230V & 2 Secondaries of 6V each

Put secondaries in parallel for full current or series to double voltage.@ half the current

Size W60xH50xD47mm FC74mm.

2VA 9V + 9V. Clamp type Laminated Transformer.

Single Primary of 230V & 2 Secondaries.

Put secondaries in parallel for full current or series to double voltage.

Size W45xH45xD45mm FC68mm.

13 Way Header Socket, 2.54mm Pitch

1 row of 13 pins 2.54mm (0.1") Pitch

Metal Film Resistor 1% Tolerance 1/4W 250V max 130 ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 130K ohms. 10 pack

13A. 25mm (1") Ceramic Mains Fuse to BS1362 standard. 

Supplied in packs of 10

Metal Film Resistor 1% Tolerance 1/4W 250V max 13K ohms. 10 pack

5-6 Watt 5% Wire-wound Resistor 13K ohms

resistors may vary from Illustrations

14 Pin Dual Row IDC 2.54mm pitch Ribbon Cable Connector

For use with Standard 1.27mm pitch ribbon cable

Simple to use:

No need to strip cable, just crimp

Complete with cable strain relief bracket

14 Pin Dual Row IDC Boxed Header 2.54mm

Through Hole, PCB Mount 

IC Socket Standard 14 pin

High Quality Turned Pin IC Socket. Totally protected from solder. Gold plated contacts 14 pins

14 Way Header Socket, 2.54mm Pitch

1 row of 14 pins 2.54mm (0.1") Pitch

14 Way Header Socket, 2mm Pitch

1 row of 14 pins 2mm Pitch

14.7456MHz HC49 Quartz Crystal

Thermal Fuse. 142 deg C. 240VAC 10A

High Quality Terminal Block 12 Way 240VAC max. Easily cut. 15 Amps Rating

PA/Disco Speaker 15" 700W Max 350 W rms 8ohms

High Quality  Power Loudspeaker, for PA, Stage, Disco etc. Kapton voice coil, coated paper cone.

*  700W max, 350W rms
*  Freq Response 42Hz - 5KHz
*  50 oz magnet
*  SPL @ 1W/1m 101dB

382mm Bass Speaker, for new designs or replacements of Pro Music,

For PA and General Purpose uses, with extended lower frequency range.

High Quality design from professional grade materials features a high temperature voice coil, ferrite magnet, treated paper cone, rolled cloth edge, Aluminium basket and gold plated push terminals for quick connection. 

• Coil Size 76.2mm
• Connectors: Gold Plated Push Terminals
• Impedance 8 ohms
• Magnet Weight 67 Ounce - 1.9 kg
• Peak Music Power 400W
• Power RMS 300W
• Resonant Frequency 33Hz
• Sensitivity (dBV/Pa): 98