Products Map

IR LED 5mm 950nM 35mW

IC TV Tuner 16DIL

Precision Flat Rubber Turntable Belt 5 x 0.8 mm, 121mm inside diameter

Precision Flat Rubber Turntable Belt 5 x 0.8mm x 138mm inside diameter

Precision Flat Rubber Turntable Belt 5 x 0.7mm, 158mm inside diameter

Precision Flat Rubber Turntable Belt 5 x 0.7mm, 176mm inside diameter

Precision Flat Rubber Turntable Belt 5 x 0.7mm, 185mm inside diameter

Precision Flat Rubber Turntable Belt 5 x 0.7mm, 195mm inside diameter

Precision Flat Rubber Turntable Belt 5 x 0.5mm, 201mm inside diameter

Precision Flat Rubber Turntable Belt 5 x 0.6mm, 205mm inside diameter

Preamplifier with RIAA Correction for Turntables

A  high quality Hifi and DJ pre-amplifier - amplifiying low level signals from a turntable cartridge, to line level amplifiers and active speakers.

Many stereo units havwe no low-level inputs for magnetic cartridges (for Vinyl records).
This unit allows the output of this unit to be fed into CD, AUX or TAPE inputs.

* Phono (RCA) inputs & outputs (RCA)
* Amplifies the signal to match it to the line or CD input of an amplifier
* On/Off switch fitted
* Mains adaptor included

Power supply (included) 9Vdc 100mA (included)
Battery 9V PP3 (not included)
Frequency response 30Hz-20kHz
Gain 34dB
Input impedance 50k Ohms
Output impedance 50k Ohms
Dimensions 30 x 70 x 90mm

Coax Splitter or Joiner. One male plug to 2 female sockets.

Typical use: Plugs into TV socket for extension aerial to another TV

Coax Splitter Diecast 2 Females to 1 Male. Fully Screened in Solid Metal.

Coax Male. Chassis/Panel mounting. Single nut fixing.

Ideal to replace broken TV/VCR/Sky box//DVD/FM etc aerial males.

Accepts coaxial line-sockets

Coax Coupler Female each end. Joins 2 x Coax Plugs

Coax Coupler Male each end

Joins 2 Female Coax connectors or changes the gender from female to male.

Coax Splitter 3 way. UHF or VHF. Hard wired (screws & clamp) with power-pass.

Good for mast-head splitting. 75 ohms.

4 Way Coaxial Splitter. UHF or VHF. Hard wired (screws & clamp) with power-pass.

Good for mast-head splitting. 75 ohms and making a permanent 4-way connection for 4 TVs or FM radios

Chassis/Panel mounting Coax Socket

Single nut fixing. Ideal to replace broken TV aerial sockets,

Solder tag

Coaxial Line Socket. Nickel Plated Brass. Mates with Coaxial Plug

High Quality Metal Coax Plug. Standard type as used by counteless TV engineer

Screw & Clamp fitting

TV Tilting Wall Bracket for 32 inch to 65 inch up to 35kg 

• Low profile design
• High Tensile Steel TV/monitor tilted wall bracket VESA 600x400
• Easy to install, low profile tilt wall bracket to mount and support a TV screen.
• Compatible with VESA mounting patterns
• Installation hardware included

TV Full Motion 3 Joints for 14 to 55 inch for loads up to 30 kg

This TV wall mount bracket can tilt, swivel and rotate, providing full flexibility for exacting viewing angles.
Includes all required installation materials and manual.

Features
Min. screen size: 14" / 58 cm
Max. screen size: 55" / 139 cm
Tilt, swivel and rotate flexibility
Supports 30 kg

Package contents
1x TV wall mount
1x installation materials
1x manual

Soundlab 100W Piezo Tweeter Top Box with 6 Square Tweeters P115CP

Black Carpet Covered Cabinet with 6 x 80mm Tweeters.
Impedance: Piezo Tweeters Match with 4 ohm 8 ohm  & 16 ohm Speakers
Sensitivity: 90dBV/Pa
Frequency Response: 1-20KHz
Power: 100W max, 50W RMS
Input: ¼ inch 6.35mm Jack 
Output Link: ¼ inch 6.35mm Jack
Dimensions 265 x 500 x 140mm
Weight: 3.4Kg

5V relay module for Arduino and other microcontroller projects

• Fitting kit included& Angle adjustablle
• Neat Cable Management System
• Tilt -15 - +15 degrees
• Swivel 360 degrees
• Max load  2 x 10Kg
• 400mm Height  2 x 390mm Arms
• Net weight 3.7Kg
• Screen Sizes: 10 to 27 inches
• VESA Size: 75x75 and100x100

Adaptor: 2 Phono (RCA) Sockets (Females) to a Mono 6.3mm Jack Plug (Male)

Adaptor: 2 Phono (RCA) Sockets (females) to a 6.3mm Stereo Jack Plug