Search Results

3.5µF 450VAC CBB61 Polypropylene Motor Run/Motor Start Capacitor With Mounting Lug

Radial leads (9cm long). 50-60Hz. Self extinguishing case and cover.

Tolerance ± 5%

Dimensions 43 x 18 x 31mm (exc. mounting lug)

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 3.9 ohms

5-6 Watt 5% Wire-wound Resistor 3.9 ohms

resistors may vary from Illustrations

30 Metre Ultra High Speed 4K UHD Active Fibre Optic HDMI 2.0 Leads

• Support video resolutions up to 4K Ultra High Definition @ 60Hz
• Sleek high quality alloy headshells with gold plated connectors (only 19mm wide and 9mm high)
• 4.8mm outer diameter fibre optic cables provide flexibility over long distances without signal loss
• HDMI v2.0 4K & HDCP 2.2 compliant
• Video bandwidth up to 18Gb/s @60Hz

Vintage Numitron 7-Segment Filament Display

Vertical Capacitor Clip 30mm Plastic

IC Socket Standard 32 pin

32.768KHz Miniature Cylindrical Quartz Crystal (as used in Watches and Clocks)

Panel Fuseholder for 32mm 1.25 inch (1¼") fuses wth Screw Cap & Solder tags

For 6.3mm x 32mm fuses

Max Rating: 250V 10A

M15 nut. 15mm cut-out

Panel Fuseholder for 32mm 1.25 inch (1¼") fuses wth Screw Cap & Solder tags

For 6.3mm x 32mm fuses

Max Rating: 250V 15A

M15 nut. 15mm cut-out

32uF + 32uF 500V Dual Capacitor for Valve (Tube) Amplifiers. Tol ±20%

Also suitable for other valve equipment including radios, radiograms, tape recorders, etc

35mm dia x 50mm h. 3 Solder tags. Common earth. Shiny new stock

Parallel the positives to get 64uF 500V

Ceramic Capacitor 3KV 330pF

Vertical Capacitor Clip 35mm Plastic

Pin Header Male Strip 2.54mm spacing (0.1 inch) Gold Plated Phosphor Bronze pins.

1 row of 36 pins 90 degree Angled.

Pins Can be Snapped off

Straight Pin Header Male Strip 2.54mm spacing (0.1 inch)

Gold Plated Phosphor Bronze pins.

1 row of 36 pins 

36mm 4 ohm Miniature Speaker

With polyurethane edge & ferrite magnet, 3W 4 ohms
20mm Height

3A. 25mm (1") Ceramic Mains Fuse to BS1362 standard.

Supplied in packs of 10

Battery holder for 4 X AAA batteries. In series to give 6V. Wire ended

3D Joystick Controller for PTZ/ Cameras

This professional 3D PTZ (Pan Tilt & Zoom) Joystick is used to control from 1 up to 255 PTZ cameras. Being a 3D joystick means as well as moving the camera up/down and left/right you can also zoom in and out by twisting the joystick, this makes for very easy and accurate control of your cameras. 

It features a backlit LCD display for simple programming and camera identification. With multi protocols and baud rates it is able to control most of the PTZ cameras available today using RS485. Complete with UK power supply and instruction manual.

Yellow 3mm Diffused LED 588-590nm 20mA max, 1.8V-2V max

White 3mm Water Clear LED, 20mA max, 3V-3.2V max

Blue  3mm Diffused LED 460-465nm, 20mA max, 3V-3.2V max

Red 3mm Diffused LED 660-625nm, 20mA max, 1.8V-2V

Yellow 3mm Diffused LED Standard Brightness 250mcd

Green 3mm Diffused LED 568-570nm 20mA 1.8V-2V max.

Red 3mm Diffused LED Standard Brightness 3000mcd 625nm  VF 2.3V typ, 50mA max

Green 3mm Water Clear LED, High Brightness 150mcd 565nM 50 deg viewing angle

Green Ultra Bright 3mm Water Clear LED, 8400mcd 525nM 35 deg viewing angle

Red 3mm Water Clear LED High Brightness 500mcd.