Search Results

IC MCU 1K EEPROM 36 RAM 10MHz 18DIL

6.5cm High Frequency Piezo Horn Driver 150W Max
For use with reflector horns fitted with 1.375" (1 3/8") thread.

Crossover or capacitor not needed, due to high frequency only response.
Recommended to use a 10W protection resistor in series, around 33 ohms

Frequency response: 3,000Hz to 30,000Hz

Impedance: 1000 ohms @ 1,000Hz

Power max: 150W

SPL @ 1W/1m: 93dB

Dimensions: 75 x 65mm

Weight 95g

Piezo Tweeter
High efficiency piezo-electric high impedance tweeter that doesn't need a cross-over capacitor.

Clean & crisp reproduction of  high frequencies. Can be used in series with 10W 33ohm resistor for protection, but will work perfectly without.

Power max: 150W
Frequency response: 4kHz - 30kHz
Impedance @ 1kHz: 1k ohms
Impedance @ 25kHz: 60 - 80 ohms
Dimensions: 85 x 85 x 70mm

Piezo Horn Tweeter

Special piezo high impedance tweeter featuring high efficiency without overloading the amplifier.

Connect easily via a series resistor of around 33 ohms 10 Watts. No need for a capacitor.

Crisp, clean reproduction of the high frequencies.

• Power max.150W
• Frequency response4kHz - 30kHz
• Impedance : 1kHz1k ohms
• Impedance : 25kHz
• Dimensions: 145mm x 68mm

PIR sensor module for Arduino and other microcontroller projects

Adaptor: PL259 (UHF) Socket (Female) to BNC Plug

UHF Male (PL259) to BNC Female.

High Quality UHF Plug with 10mm cable entry

Accepts RG213 cable for example.

Solder centre pin and twist/hold screen by screw-thread

UHF Plug with 6mm cable entry. for example RG6 cable.

Solder centre pin and twist/hold screen by screw-thread

3mm LED Plastic Bezel - Sanp in

DC Chassis Plastic Switched Socket for plugs 2.1mm x 5.5mm 

(To fit our part numbers ROCA & ROCB)

5mm Plastic LED Bezel - Ring & Retaining Clip.

Playstation 4 (PS4) replacement hall effect joystick

  If your Playstation 4 controller has a mind of it's own (stick drift) or has physical damage to a joystick then don't just buy a new one, fix it. These new "hall effect" replacement joysticks work with tiny magnets and a magnetic strength sensor to replace the old style metal contact moving over a carbon track type. Replacing your old joystick with one of these will not only get it working properly again but make it better than when it was new with stick drift being a thing of the past.

• High Precision Control - Experience high-response accuracy with our hall effect joysticks, designed without the common issues of carbon film joystick jitter. The enhanced
  sensitivity of the Hall effect sensor provides an unmatched control precision, perfect for FPS shooters and any game demanding fine-tuned input
• No "Stick Drift" thanks to Hall effect magnetic technology
• Durable and  Reliable - hall effect technology eliminates physical contact preventing wear and tear and ensuring longevity

Playstation 5 (PS5) replacement hall effect joystick

  If your Playstation 5 controller has a mind of it's own (stick drift) or has physical damage to a joystick then don't just buy a new one, fix it. These new "hall effect" replacement joysticks work with tiny magnets and a magnetic strength sensor to replace the old style metal contact moving over a carbon track type. Replacing your old joystick with one of these will not only get it working properly again but make it better than when it was new with stick drift being a thing of the past.

• High Precision Control - Experience high-response accuracy with our hall effect joysticks, designed without the common issues of carbon film joystick jitter. The enhanced
  sensitivity of the Hall effect sensor provides an unmatched control precision, perfect for FPS shooters and any game demanding fine-tuned input
• No "Stick Drift" thanks to Hall effect magnetic technology
• Durable and  Reliable - hall effect technology eliminates physical contact preventing wear and tear and ensuring longevity

IC Phase Locked Loop 16DIL

Energy Efficient UK Switch-mode Variable Voltage Universal Power Supply 1500mA

 Plug in Power Supply with Various Tips & Voltages:: 3V, 4.5V,  6V, 7.5V, 9V & 12V all at full rated output of 1500mA
 

• Energy Efficient
• Short circuit protection
• Overheating protection
• Overload protection
• Overcurrent protection

All voltages are regulated & selected by a small rotary switch:

UK mains plug. Can operate from 100VAC to 240VAC 50/60Hz

Adaptor plugs    3.5mm jack, 2.35 x 0.75mm, 3.5 x 1.35mm, 4 x 1.7mm, 5 x 2.1mm, 5.5 x 2.1mm, 5.5 x 2.5mm, 6.3 x 3mm

UK Approvals

Cable length 1.8m

Full UK  & EU Approvals

CE, Haus, Quader, WEEE, BS1363

NPN TO92 EBC 30V 600mA 250MHz 

Same as 2N2222A in TO-92 package

PNP TO92EBC Please go to equivalent  MPS2907A

Standard "Chicken head" Pointer Knob for 6.3mm (¼ inch knob)

• Heat-resistant plastic

• Grub screw fixing

• Diameter 19mm

• Suitable for 6.35mm (0.25in) ¼" spindles

Polyimide Film Tape 10mm x 27m

This polyimide film tape is stable across a wide range of temperatures (-70°C to 280°C).


Specifications:

Width: 10mm
Length: 27m
Thickness: 0.055mm
Tensile Force: ≥ 42N/25mm
Peeling Force: ≥ 26N/25mm

Polyimide Film Tape 15mm x 27m

This polyimide film tape is stable across a wide range of temperatures (-70°C to 280°C).


Specifications:

Width: 15mm
Length: 27m
Thickness: 0.055mm
Tensile Force: ≥ 42N/25mm
Peeling Force: ≥ 26N/25mm

Polyimide Film Tape 25mm x 27m

This polyimide film tape is stable across a wide range of temperatures (-70°C to 280°C).


Specifications:

Width: 25mm
Length: 27m
Thickness: 0.055mm
Tensile Force: ≥ 42N/25mm
Peeling Force: ≥ 26N/25mm

High Quality Plug in Power Adaptor, Power Supply with 8 tips 3, 4.5, 6, 7.5, 9, 12V at 1000mA

Energy Efficient. Short circuit Protection, Overheating Protection, Overloading Protection & Overcurrent Protection

All voltages are regulated & selected by a small rotary switch:

Voltages: 3V, 4.5V,  6V, 7.5V, 9V & 12V all at full rated output of 1000mA

UK mains plug. Can operate from 100VAC to 240VAC 50/60Hz
Adaptor plugs    3.5mm jack, 2.35 x 0.75mm, 3.5 x 1.35mm, 4 x 1.7mm, 5 x 2.1mm, 5.5 x 2.1mm, 5.5 x 2.5mm, 6.3 x 3mm

Cable length 1.8m

Full UK  & EU Approvals

CE, Haus, Quader, WEEE, BS1363

PP3 9V Battery. High Quality Long Life Alkaline Battery

Last up to 6 times longer than normal zinc carbon cells. Price and quality similar to Duracell

 Comprehensive Pro-Audio Cable Tester for XLR, Speakon, Jacks, DIN, Banana, Phono RCA, RJ45 etc

4-Way Professional Speaker Selector with Protection Circuit

This metal switcher allows the distribution of a stereo amplifier. Simply connect the output of an amplifier to the box, this output can then be distributed to up to four different stereo speaker sets in four different locations. Each speaker pair can be individually activated via the push buttons on the front of the box.

• Enables four pairs of speakers to be connected to a single stereo amplifier
• Heavy duty push-buttons
• Built-in overload protection
• Designed for 4-16 ohms speakers
• Trigger terminals

Soundlab Titanium Super Bullet Tweeter 150W RMS L050AR

Professional quality tweeter with heavy die-cast aluminium housing fitted with powerful high temperature Titanium voice coil.

Features:
Diecast Aluminium Frame
High Temp Titanium Voice Coil
Max Power: 300W
RMS Power: 150W
Impedance: 8 ohms
Magnet Weight 20 oz
Voice Coil 44mm (1 3/4 inch)
Freq Response 1.5KHz - 20KHz
Weight: 726 grams
Dimensions: 100 x 100 x 78mm

Titanium Super Bullet Tweeter 75W RMS

Professional quality tweeter with heavy die-cast aluminium housing fitted with powerful high temperature Titanium voice coil.

Features:
Diecast Aluminium Frame
High Temp Titanium Voice Coil
Max Power: 150W
RMS Power: 75W
Impedance: 8 ohms
Magnet Weight 8 oz
Voice Coil 25mm (1 inch)
Freq Response 1.5KHz - 20KHz
Weight: 726 grams
Dimensions: 80 x 80 x 65mm