Search Results

IC Darlington Driver Array 16DIL

ULN2003A IC Darlington Driver Array 16DIL

ULN2003D SOIC16 IC Darlington Driver Array 16 

IC Darlington Driver Array 16DIL

UL:N2065B - IC Quad Darlington Driver 80V 1.5A 16DIL

IC Quad Darlington Driver 50V 1.5A 16DIL

ULN2074B - IC Quad Darlington Driver 50V 1.5A 16DIL

IC 8 Darlington Drivers 50V 500mA 18DIL

IC 8 Darlington Drivers 18DIL

Guitar Fuzz Effects Pedal Kit v2

This kit is based on the legendary fuzz face pedal. Instead of ultra rare germanium transistors, it uses genuine new old stock NKT713 Newmarket vintage NPN germanium transistors to give you that classic germanium fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building.

The v2 includes an indicator LED and a footswitch daughterboard to make assembly easier and cleaner.
 

The following components are included in this kit:

• Instructions  x 1
• 100kΩ 1/4W carbon resistor x 1
• 33kΩ 1/4W carbon resistor x 1
• 470Ω 1/4W carbon resistor x 1
• 4.7kΩ 1/4W carbon resistor x 1
• 1MΩ 1/4W carbon resistor x 1
• 2.2kΩ 1/4W carbon resistor x 1
• 2.2µF 25V electrolytic capacitor x 1
• 22µF 25V electrolytic capacitor x 1
• 10nF dipped polyester capacitor x 1
• 220µF 25V electrolytic capacitor x 1
• 100nF boxpoly capacitor x 1
• 1N4007 diode x 1
• 1kΩ 9mm vertical potentiometer x 1
• 500kΩ 9mm vertical potentiometer x 1
• 10kΩ 10mm horizontal trimpot x 1
• 5mm red LED x 1
• LED Spacer x 1
• NKT713 Germanium NPN BJT
• 6.3mm (1/4") stereo chassis socket x 1
• 6.3mm (1/4") mono chassis socket x 1
• 2.1 x 5.5mm switched DC chassis socket x 1
• PP3 battery snap x 1
• PCB x 1
• Footswitch x 1
• Footswitch daughterboard PCB x 1
• Hookup wire x 50cm

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (only needed if you want to drill an enclosure)

Guitar Fuzz Effects Pedal Kit

This kit is based on the legendary fuzz face pedal. Instead of ultra rare germanium transistors, it uses genuine new old stock NKT128 Newmarket vintage PNP germanium transistors to give you that classic germanium fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building.

The v2 includes an indicator LED and a footswitch daughterboard to make assembly easier and cleaner.
 

The following components are included in this kit:

• Instructions  x 1
• 100kΩ 1/4W carbon resistor x 1
• 33kΩ 1/4W carbon resistor x 1
• 470Ω 1/4W carbon resistor x 1
• 4.7kΩ 1/4W carbon resistor x 1
• 1MΩ 1/4W carbon resistor x 1
• 2.2kΩ 1/4W carbon resistor x 1
• 2.2µF 25V electrolytic capacitor x 1
• 22µF 25V electrolytic capacitor x 1
• 10nF dipped polyester capacitor x 1
• 220µF 25V electrolytic capacitor x 1
• 100nF boxpoly capacitor x 1
• 1N4007 diode x 1
• 1kΩ 9mm vertical potentiometer x 1
• 500kΩ 9mm vertical potentiometer x 1
• 10kΩ 10mm horizontal trimpot x 1
• 5mm red LED x 1
• LED Spacer x 1
• NKT128 Germanium PNP BJT x 2
• 6.3mm (1/4") stereo chassis socket x 1
• 6.3mm (1/4") mono chassis socket x 1
• 2.1 x 5.5mm switched DC chassis socket x 1
• PP3 battery snap x 1
• PCB x 1
• Footswitch x 1
• Footswitch daughterboard PCB x 1
• Hookup wire x 50cm

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (only needed if you want to drill an enclosure)

Guitar Fuzz Effects Pedal Kit v2

This kit is based on the legendary fuzz face pedal. Instead of germanium transistors, it uses newer, more commonly available NPN silicon transistors to give you a harsh and sharp fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building.

The v2 includes an indicator LED and a footswitch daughterboard to make assembly easier and cleaner.
 

The following components are included in this kit:

• Instructions  x 1
• 100kΩ 1/4W carbon resistor x 1
• 33kΩ 1/4W carbon resistor x 1
• 470Ω 1/4W carbon resistor x 1
• 4.7kΩ 1/4W caron resistor x 1
• 1MΩ 1/4W carbon resistor x 1
• 2.2kΩ 1/4W carbon resistor x 1
• 2.2µF 25V electrolytic capacitor x 1
• 22µF 25V electrolytic capacitor x 1
• 10nF dipped polyester capacitor x 1
• 220µF 25V electrolytic capacitor x 1
• 100nF boxpoly capacitor x 1
• 1N4007 diode x 1
• 1kΩ 9mm vertical potentiometer x 1
• 500kΩ 9mm vertical potentiometer x 1
• 10kΩ 10mm horizontal trimpot x 1
• 5mm red LED x 1
• BC108 NPN BJT x 1
• BC183 NPN BJT x 1
• 6.3mm (1/4") stereo chassis socket x 1
• 6.3mm (1/4") mono chassis socket x 1
• 2.1 x 5.5mm switched DC chassis socket x 1
• PP3 battery snap x 1
• PCB x 1
• Footswitch x 1
• Footswitch daughterboard PCB x 1
• Hookup wire x 50cm

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (optional - only needed if you want to drill an enclosure)

Ultra Bright Blue 5mm. Clear 7500mcd, 2.6-3.6V 20mA max

Ultra Bright Blue 5mm  Clear. 8,000mcd DISCONTINUED Please go to B5U

Ultra Bright Green 5mm Water Clear LED 

22,000mcd 15 deg viewing angle, 3.1V 30mA

Ultra High Brightness Green 3mm Water Clear LED. 525nm, 8400mcd. Vf = 3.3-3.8V. If 30mA max

Ultra Bright White 5mm LED Water Clear.

DC Voltage 3.0 to 3.4VDC

Max Current: 40mA.

Continuous Working Current: 20mA  for 11,000mcd

Yellow Ultra-Bright 5mm Water Clear LED 5800mcd. VF = 2V @ 20mA, Viewing Angle 15 deg

5MP Ultra High Definition Black Eyeball Dome Camera 20M Night Vision

Superb quality image with true colours and fine definition. 

• For outdoors or indoors (Robust Metal Fully Weatherproof Housing)
• Wide-angle 3.6mm megapixel lens. 
• Easy to mount in any direction. 

Also compatible with older 4MP & 2MP HD DVRs  Please phone 020 8452 0161 if you need this adjustment

Image Sensor: 1/2.5" CMOS Sensor
Resolution: 5.0 Megapixel, 2592 x1944
Lux: 0.05 IR off, 0 IR on
Lens: Fixed 3.6mm with IR Cut Filter

• Digital Wide Dynamic Range
• Digital Noise Reduction
• Auto White Balance
• AGC
• Anti-Fog Dual Glass

Power Reqd: 12VDC 550mA
Infra-red Source: 18pcs x 14µ SMD IR LEDs
Infra Red Beam: 20 Metres
Terminations: BNC & DC 2.1 x 5.5mm on Flying Leads
Size: D93 X H74mm

Ultra HD 5 Megapixel Varifocal White Eyeball Dome Camera with 30M Night Vision

An outdoor or indoor camera in a robust metal casing. 

5 Megapixels HD gives an super high definition image with true colours. 

Close up to wide-angle 2.8-12mm Varifocal Megapixel lens,

Easy angle & focusing adjustment .Can be mounted to cover any direction.

This camera can be set for lower, older definitions such as 960H, 4MP or 2MP to be compatible with older HD DVRs.  Please phone 020 8452 0161 if you need this adjustment

Image Sensor: 1/2.5" CMOS Sensor
Resolution: 5.0 Megapixel, 2592(H)×1944(V)
Lux: 0.05 IR off, 0 IR on
Lens: Fixed 2.8-12mm with IR Cut Filter
Wide Dynamic Range: Digital
Noise Reduction: Digital
Auto White Balance: Yes
AGC: Yes
Anti-Fog Dual Glass: Yes
Power Reqd: 12VDC 750mA 
Infra-red Source: 24pcs x 14µ SMD IR LEDs
Infra Red Beam: 30 Metres
Terminations: BNC & DC 2.1 x 5.5mm on Flying Leads
Size: D120 X H98mm

5 Megapixel HD White Bullet Camera 25M Night Vision.

Superb quality image with true colours and ultra fine definition. 

• For outdoors or indoors (Robust Metal Fully Weatherproof Housing)
• Wide-angle 3.6mm megapixel lens. 
• Easy to mount in any direction. 

Also compatible with older 4MP & 2MP, 960P, 720P DVRs.  

Please phone 020 8452 0161 if you need this adjustment

Image Sensor:CMOS
Resolution: 5.0 Megapixel, 
Lux: 0.05 IR off, 0 IR on
Lens: Fixed 3.6mm 

• Digital Wide Dynamic Range
• Digital Noise Reduction
• Auto White Balance
• AGC

Power Reqd: 12VDC 500mA 
Infra-red Source: Surround of SMD IR LEDs
Infra Red Beam: 25 Metres
Terminations: BNC & DC 2.1 x 5.5mm on Flying Leads

Dimensions: 70mm dia x 180mm length
 

Ultra HD 5 Megapixel White Eyeball Dome Camera 20M Night Vision

Superb quality image with true colours and fine definition. 

• For outdoors or indoors (Robust Metal Fully Weatherproof Housing)
• Wide-angle 3.6mm megapixel lens. 
• Easy to mount in any direction. 

Also compatible with older 4MP & 2MP, 960H HD DVRs.  Please phone 020 8452 0161 if you need this adjustment

Image Sensor: 1/2.5" CMOS Sensor
Resolution: 5.0 Megapixel, 2592 x1944
Lux: 0.05 IR off, 0 IR on
Lens: Fixed 3.6mm with IR Cut Filter

• Digital Wide Dynamic Range
• Digital Noise Reduction
• Auto White Balance
• AGC
• Anti-Fog Dual Glass

Power Reqd: 12VDC 550mA 
Infra-red Source: 18pcs x 14µ SMD IR LEDs
Infra Red Beam: 20 Metres
Terminations: BNC & DC 2.1 x 5.5mm on Flying Leads
Size: D93 X H74mm

Ultra High Definition 5MP 22x PTZ Speed Dome with 60M Long Range Night Vision AHD with 4in1 5MP HD Sensor.

16 Camera 4 Megapixel High Definition Night & Day White Eyeball Dome CCTV System with 30m Night Vision
All our systems are bespoke; they are not pre-boxed kits. You can select any mix of our  cameras. Just phone  020 8452 0161. All systems include a highly discounted bundle.

• 4MP gives stunning & detailed colour evidence 
• Incredibly Advanced Video Content Analysis (VCA) - Facial Recognition, Crowd Density, Area Intrusion, People Flow Counter, Object Removal to name but a few
• Simple Mobile/PC/Laptop viewing with Internet & Cloud Technology
• Very High Efficiency Ultra 265 codec

Cameras are suitable for Outdoor (IP67)  & Indoor Use. All Cameras have 30M Smart Night Vision

Features:
*  Realtime Live & Recorded Images
*  View on PCs, Laptops, iPhones, iPads, Android Phones and Tablets
*  SD Card Slot on each camera for edge recording (upto 256GB)
*  Built-in microphone on each camera
*  Video Content Analysis includes:     
         •Entering/leaving area
         •Out of focus detection
         •Scene change detection
         •Object removal
         •Object left behind
         •Auto tracking (for PTZ cameras)
         •People flow counter
         •Crowd density
         •Face detection
         •Tripwire crossing detection
         •Area intrusion detection
         •Area leaving detection
*  Quiet Running Fanless 16 Channel NVR with VGA and HDMI video output
*  4 Megapixel High Definition Eyeball Dome Cameras
*  Supplied with 1TB HDD,  with option for 2TB, 4TB, 6TB or 8TB.
*  Can be set to Real-time, Time Lapse, VCA or Programmed Timer.

Full Datasheets can be found below:

NVR

Camera

Contents of Package:
16 x 4 Megapixel White Eyeball Dome Cameras IPC3614LE-ADF28K
1 x Uniview Ultra High Definition 8 Megapixel 16 Channel NVR NVR302-16S2-P16
16 x 20m CAT6 Leads
1 x 1m HDMI lead for NVR to Screen

HD Monitor available as an option

Hard Drive Selection Guide
The following times are based on high quality recordings.
These times can be greatly extended by changing recording quality settings or by using motion detection/timed recording.

16 cameras at real-time:

1TB:          2 days
2TB:             3 1/2 days
4TB:             7 days
6TB:             10 1/2 days
8TB:             14 days
12TB:           21 days
16TB:           28 days

4 Camera 4 Megapixel High Definition Night & Day White Eyeball Dome IP CCTV System with 30m Night Vision
All our systems are bespoke; they are not pre-boxed kits. You can select any mix of our  cameras. Just phone  020 8452 0161. All systems include a highly discounted bundle.

• 4MP gives stunning & detailed colour evidence 
• Incredibly Advanced Video Content Analysis (VCA) - Facial Recognition, Crowd Density, Area Intrusion, People Flow Counter, Object Removal to name but a few
• Simple Mobile/PC/Laptop viewing with Internet & Cloud Technology
• Very High Efficiency Ultra 265 codec

Cameras are suitable for Outdoor (IP67)  & Indoor Use. All Cameras have 30M Smart Night Vision

Features:
*  Realtime Live & Recorded Images
*  View on PCs, Laptops, iPhones, iPads, Android Phones and Tablets
*  Built-in microphone on each camera
*  SD Card Slot on each camera for edge recording (upto 256GB)
*  Video Content Analysis includes:
         •Entering/leaving area
         •Out of focus detection
         •Scene change detection
         •Object removal
         •Object left behind
         •Auto tracking (for PTZ cameras)
         •People flow counter
         •Crowd density
         •Face detection
         •Tripwire crossing detection
         •Area intrusion detection
         •Area leaving detection
*  Quiet Running Fanless 4 Channel NVR with VGA and HDMI video output NVR501-04B-P4
*  4 Megapixel High Definition Eyeball Dome Cameras IPC3614LE-ADF28K
*  Supplied with 1TB HDD,  with option for 2TB, 4TB, 6TB or 8TB.
*  Can be set to Real-time, Time Lapse, VCA or Programmed Timer.

Full Datasheets can be found below:

NVR

Camera

Contents of Package:
4 x 4 Megapixel White Eyeball Dome Cameras IPC3614LE-ADF28K
1 x Uniview Ultra High Definition 8 Megapixel 4 Channel NVR NVR501-04B-P4
4 x 25m CAT6 Leads
1 x 1m HDMI lead for NVR to Screen

HD Monitor available as an option

Hard Drive Selection Guide
The following times are based on high quality recordings.
These times can be greatly extended by changing recording quality settings or by using motion detection/timed recording.

4 cameras at real-time:

1TB:             7 days
2TB:             14 days
4TB:             28 days
6TB:             42 days
8TB:             56 days

8 Camera 4 Megapixel High Definition Night & Day White Eyeball Dome IP CCTV System with 30m Night Vision
All our systems are bespoke; they are not pre-boxed kits. You can select any mix of our  cameras. Just phone  020 8452 0161. All systems include a highly discounted bundle.

• 4MP gives stunning & detailed colour evidence 
• Incredibly Advanced Video Content Analysis (VCA) - Facial Recognition, Crowd Density, Area Intrusion, People Flow Counter, Object Removal to name but a few
• Simple Mobile/PC/Laptop viewing with Internet & Cloud Technology
• Very High Efficiency Ultra 265 codec

Cameras are suitable for Outdoor (IP67)  & Indoor Use. All Cameras have 30M Night Vision

Features:
*  Realtime Live & Recorded Images
*  View on PCs, Laptops, iPhones, iPads, Android Phones and Tablets
*  Built-in microphone on each camera
*  SD Card Slot on each camera for edge recording (upto 256GB)
*  Video Content Analysis includes:     
         •Entering/leaving area
         •Out of focus detection
         •Scene change detection
         •Object removal
         •Object left behind
         •Auto tracking (for PTZ cameras)
         •People flow counter
         •Crowd density
         •Face detection
         •Tripwire crossing detection
         •Area intrusion detection
         •Area leaving detection
*  Quiet Running Fanless 8 Channel NVR with VGA and HDMI video output
*  4 Megapixel High Definition Eyeball Dome Cameras
*  Supplied with 1TB HDD,  with option for 2TB, 4TB, 6TB or 8TB.
*  Can be set to Real-time, Time Lapse, VCA or Programmed Timer.

Full Datasheets can be found below:

NVR

Camera

Contents of Package:
8 x 4 Megapixel White Eyeball Dome Cameras IPC3614LE-ADF28K 
1 x Uniview Ultra High Definition 8 Megapixel 8 Channel NVR NVR501-08B-P8
8 x 25m CAT6 Leads
1 x HDMI lead for DVR to Screen

HD Monitor available as an option

Hard Drive Selection Guide
The following times are based on high quality recordings.
These times can be greatly extended by changing recording quality settings or by using motion detection/timed recording.

8 cameras at real-time:

1TB:             3 1/2 days
2TB:             7 days
4TB:             14 days
6TB:             21 days
8TB:             28 days

Ultrasonic ranging module for Arduino and other microcontroller projects

Accuracy : 2mm

Example project: 

 

HC SR04 Distance Measurement Tool
 

This article will demonstrate how to build a simple distance measuring device using the HC SR05 ultrasonic sensor board. This project can be used standalone as a way of measuring short distances or, it can be incorporated into other projects that require distance measuring. This sensor works best when the two transceivers are parallel to a solid surface, at a distance between 2cm to 450cm. 

 

Here’s what you will need:

 

Tools

Jumper leads – Male to Female x 8

Breadboard (optional)

Components

HCSR04 Ultrasonic Distance Sensor x 1

Arduino Uno x 1 or Arduino Nano x 1

LCD1602B LCD Screen x 1

KY1602 Parallel to Serial Converter x 1

 

Libraries

LiquidCrystal I2C

HCSR04 ultrasonic sensor

 

Step 1

First, you will need to connect the HCSR04 sensor to the Arduino. Simply use the male to female jumper leads to connect the two together as described below and in fig.1:

HCSR04                                      Arduino

VCC-----------------------------------------5V

Trig------------------------------------------D3

Echo----------------------------------------D2

GND---------------------------------------GND

 

Step 2

Solder the KY1602 module onto the 1602 LCD screen. Pin 1 on the KY1602 module is the one closest to the 4 data and power pins. Once soldered, you can now connect the LCD display to the Arduino as shown in fig. 1.


                                                                               fig. 1

 

Step 3

Connect the Arduino to a computer and install the libraries mentioned above. If you need help installing the libraries, CLICK HERE for a quick tutorial.

 

Step 4
You can now start writing the code to get this all working:

First, clear the IDE window. Then, include the aforementioned libraries:
 

 
    
#include <HCSR04.h> 
#include <LCD_I2C.h> 
    

Initialize the HCSR04 sensor. The numbers in the brackets correspond to the trigger and echo pins respectively:

 
    
HCSR04 hc(3, 2); 
    

Initialize the KY1602 I2C LCD driver (address 0x27 in this example) and specify the LCD display (in this case 16 characters, 2 rows):

 
LCD_I2C lcd(0x27, 16, 2); 
    

Begin the void setup function. Initialize the LCD screen and turn on the backlight:

 
    
void setup() 
{ 
  lcd.begin(); 
  lcd.backlight(); 
}   
 

Begin the void loop function. Set the cursor to the first character:

 
void loop() 
{ 
    lcd.setCursor(0,0); 
 

Print the distance calculated by the sensor on the LCD screen:

 
    lcd.print(hc.dist()); 
    

Add 100ms delay:

 
delay(100);                 
} 
    

The completed code should look like this:

 
#include <HCSR04.h> 
#include <LCD_I2C.h> 
 
HCSR04 hc(3, 2); 
LCD_I2C lcd(0x27, 16, 2); 
 
void setup() 
{ 
  lcd.begin(); 
  lcd.backlight(); 
} 
 
void loop() 
{ 
    lcd.setCursor(0,0); 
    lcd.print(hc.dist()); 
    delay(100);                 
} 
 
    

IC Melody Tunes Generator 8DIL

IC Programmable Encoder/Decoder Tristate18DIL