Search Results

Metallised Polyester Dipped Capacitor 400VDC Tolerance 10% 22nF (0.022uF)

12VA 6V + 6V. Clamp type Laminated Transformer.

Single Primariy of 230V & 2 Secondaries of 6V each

Put secondaries in parallel for full current or series to double voltage.@ half the current

Size W60xH50xD47mm FC74mm.

2VA 9V + 9V. Clamp type Laminated Transformer.

Single Primary of 230V & 2 Secondaries.

Put secondaries in parallel for full current or series to double voltage.

Size W45xH45xD45mm FC68mm.

19 Inch Rack Blanking Panel, 1U
 

• Powder Coated Steel

• Colour: Black

Dimensions: 19" x 1.75" x 0.43" (481 x 44 x 11mm)
 

19 Inch Rack Panel With 8 XLR/speakON Holes
 

• Black Powder Coated

• Material: 1.2mm (18 gauge) Steel

• Finish: Black

Dimensions: 19" x 1.75" x 0.43" (482.6 x 44.4 x 11mm)

19 Inch Rack Blanking Panel, 2U
 

• Powder Coated Steel

• Colour: Black

Dimensions: 19" x 3.5" x 0.43" (481 x 88 x 11mm)
 

19 Inch Rack Blanking Panel, 3U
 

• Powder Coated Steel

• Colour: Black

Dimensions: 19" x 5.2" x 0.43" (481 x 132 x 11mm)
 

19 Inch Rack Blanking Panel, 4U
 

• Powder Coated Steel

• Colour: Black

Dimensions: 19" x 7" x 0.43" (481 x 176 x 11mm)
 

Axial Electrolytic Capacitor. Low leakage. 2.2uF 450V 10x22mm.

Ripple Current 30mA @ 120Hz

MES 11mm (10mm) Round Indicator Filament Lamp 3.5V 200mA

4 Way Header Socket, 2.54mm Pitch

1 row of 4 pins 2.54mm (0.1") Pitch

4 Way Header Socket, 2mm Pitch

1 row of 4 pins 2mm Pitch

MES 11mm Round Indicator Filament Lamp 6.3V 300mA

MES 11mm (10mm) Round Indicator Filament Lamp 6V 100mA

MES 11mm (10mm) Round Indicator Filament Lamp 6V 60mA

Black Steel Dish with 2 holes for mounting Jack Sockets

14 x 89 x 130 mm. Cut-out 106 x 63mm

Black Steel Dish with 2 holes for mounting Speakon or Neutrik & Other Sockets

14 x 89 x 130 mm. Cut-out 106 x 63mm.

Bright Plated 1.3mm Steel Dish with holes for mounting 2 XLR Sockets 

13 x 89 x 130 mm. Cut-out 105 x 63mm

Microphone T-Bar for 2 Mics. Nickel Plated with Thumb wheel screws

Microphone bar to mount 2 microphones on a single stand.

Width 200mm. 2 x 3/8" mic clip mounts with 5/8" adapters

Telescopic Microphone Desk Stand

Sturdy Desktop Stand with Heavy Base.

Black and Chrome finish with standard 5/8 inch thread and rubber feet

Height: 230-380mm,

Base 130mm,

Weight 850 grams

D Gender Changer 15 pin female to 15 pin female. (Converts male to female)

D Gender Changer 15 pin male to 15 pin male (converts female to male)

D Gender Changer 25 pin female to 25 pin female. (Converts male to female)

D Gender Changer 25 pin female to 25 pin male. (Converts female to male)

Stereo Ground Loop Isolator - Audio Noise Filter

For interference suppression of Car Audio, Hifi, CD players, Turntables, Computers etc.

Various Noise Problem Sources can be suppressed by inserting this device between phono plugs/socktes (RCA).

Gold Plated Contacts.

Boom Arm for Microphone Stand
Telescopic boom arm for adding to a straight microphone stand, clamp or the Obelisk keyboard stand.

The adjustable angle base mounts to a standard 3/8in thread, the boom has a similar 3/8in and 5/8in adapter for attachment of a microphone clip.

*  Fully adjustable positioning
*  Telescopic length adjustment
*  Dimensions (fully extended): 890 x 50 x 130mm
*  Dimensions (retracted): 510 x 50 x 130mm
*  Thread fitting: 5/8" at base (3/8" or 5/8" at mic clip)
*  Weight: 620g

High Quality Gold Plated 4 x 4mm Speaker Terminal Plate 

2 Linked Pairs of Gold Plated 4mm Speaker Terminals for mounting on a cabinet

Dual Purpose Colour Coded Terminals can be connected to 4mm Banana Plugs or with bare wires.

Solder terminals on th back. 75.9 x 75.9 x 23.9 mm (H x W x D) cut-out). 

Steel Screws, zinc plated. Pozi head (Crosshead). M3 (3mm dia Metric thread) 10mm long. 100 pack

Steel Screws, zinc plated. Pozi head (Crosshead). M3 (3mm dia Metric thread) 6mm long. 100 pack

High Quality 13A Mains 6 Gang Extension Sockets & Mains Plug with 13A Fuse & 2M Long Lead