Search Results

MES 11mm (10mm) Round Indicator Filament Lamp 6V 100mA

MES 11mm (10mm) Round Indicator Filament Lamp 6V 60mA

Black Steel Dish with 2 holes for mounting Jack Sockets

14 x 89 x 130 mm. Cut-out 106 x 63mm

Black Steel Dish with 2 holes for mounting Speakon or Neutrik & Other Sockets

14 x 89 x 130 mm. Cut-out 106 x 63mm.

Bright Plated 1.3mm Steel Dish with holes for mounting 2 XLR Sockets 

13 x 89 x 130 mm. Cut-out 105 x 63mm

Microphone T-Bar for 2 Mics. Nickel Plated with Thumb wheel screws

Microphone bar to mount 2 microphones on a single stand.

Width 200mm. 2 x 3/8" mic clip mounts with 5/8" adapters

Telescopic Microphone Desk Stand

Sturdy Desktop Stand with Heavy Base.

Black and Chrome finish with standard 5/8 inch thread and rubber feet

Height: 230-380mm,

Base 130mm,

Weight 850 grams

D Gender Changer 15 pin female to 15 pin female. (Converts male to female)

D Gender Changer 15 pin male to 15 pin male (converts female to male)

D Gender Changer 25 pin female to 25 pin female. (Converts male to female)

D Gender Changer 25 pin female to 25 pin male. (Converts female to male)

Stereo Ground Loop Isolator - Audio Noise Filter

For interference suppression of Car Audio, Hifi, CD players, Turntables, Computers etc.

Various Noise Problem Sources can be suppressed by inserting this device between phono plugs/socktes (RCA).

Gold Plated Contacts.

Boom Arm for Microphone Stand
Telescopic boom arm for adding to a straight microphone stand, clamp or the Obelisk keyboard stand.

The adjustable angle base mounts to a standard 3/8in thread, the boom has a similar 3/8in and 5/8in adapter for attachment of a microphone clip.

*  Fully adjustable positioning
*  Telescopic length adjustment
*  Dimensions (fully extended): 890 x 50 x 130mm
*  Dimensions (retracted): 510 x 50 x 130mm
*  Thread fitting: 5/8" at base (3/8" or 5/8" at mic clip)
*  Weight: 620g

High Quality Gold Plated 4 x 4mm Speaker Terminal Plate 

2 Linked Pairs of Gold Plated 4mm Speaker Terminals for mounting on a cabinet

Dual Purpose Colour Coded Terminals can be connected to 4mm Banana Plugs or with bare wires.

Solder terminals on th back. 75.9 x 75.9 x 23.9 mm (H x W x D) cut-out). 

Steel Screws, zinc plated. Pozi head (Crosshead). M3 (3mm dia Metric thread) 10mm long. 100 pack

Steel Screws, zinc plated. Pozi head (Crosshead). M3 (3mm dia Metric thread) 6mm long. 100 pack

High Quality 13A Mains 6 Gang Extension Sockets & Mains Plug with 13A Fuse & 2M Long Lead

MIc Desk Stand with Boom - Heavy Stable Base

Microphone desk stand with boom arm. Heavy 130mmØ cast iron base with two piece telescopic stem fitted and a fully adjustable boom arm.

• Bright chrome finish with black attachments
• Supplied with 3/8" to 5/8" thread adaptor
• With rubber feet

Miniature Toggle Switch DPDT Biased Centre-off (ie spring return to centre position) 125VDC 5A max. 33 x 13 x 12mm M6 Nut.

Relay Double Pole Changeover 5V 2A @ 28VDC, 500mA @ 125VAC. 36 ohms. Operating Range 3.5V to 6.5V

Useful Recess Plate to fit sockets on to wooden or other thick materials.For 6.3mm (0.25 inch) Jack Sockets, Phono (RCA) Sockets, Banana Sockets etc etc.30mm deep for maximum protection.

35mm Cut-out. For use on wood, metal or plastic speaker cabinets etc.

Hole 11mm approx. Face: 45mm square with 2 fixing holes diagonally opposite.

W10 Bridge Rectifier Radial 1.5A 1000V

Metallised Polyester Dipped Capacitor 400VDC Tolerance 10% 33nF (0.033uF)

Polyester Stacked Foil Capacitor, Low Inductance, 7.5mm pin spacing, 5% Tolerance. EPCOS (Was Siemens) 120nF (0.12uF) 100V

3 Watt 5% Wire-wound Resistor 0.15 ohm

Polyester Stacked Foil Capacitor, Low Inductance, 7.5mm pin spacing, 5% Tolerance. EPCOS (Was Siemens) 150nF (0.15uF) 100V

3 Watt 5% Wire-wound Resistor 0.22 ohm

Polyester Stacked Foil Capacitor, Low Inductance, 7.5mm pin spacing, 5% Tolerance. EPCOS (Was Siemens) 220nF (0.22uF) 100V

3 Watt 5% Wire-wound Resistor 0.25 ohm

Polyester Stacked Foil Capacitor, low Inductance, 7.5mm pin spacing, 5% Tolerance. EPCOS (Was Siemens) 270nF (0.27uF) 100V