Search Results

3 Watt 5% Wire-wound Resistor 68 ohms

5-6 Watt 5% Wire-wound Resistor 68 ohms

resistors may vary from Illustrations

Carbon Film Resistor 1/2 Watt 5% 10 Pack. 680 ohms

Miniature 6 X 6mm tactile switch. Right Angled

Miniature 6 X 6mm tactile switch. 4mm Button

Miniature 6 X 6mm tactile switch. Square Button

6P4C Dual adaptor. Joins 2 sockets into one plug. All 6P4C (RJ11)

Mutliway Chassis/Panel Plug. (Yaesu style Microphone Plug). 7 ways. Fits YL700 Connector

Mutliway Chassis/Panel Plug. (Yaesu style Microphone Plug). 8 ways. Fits YL800 Connector

Axial Miniature Inductor/RF Choke, Tolerance 10% 8.2uH

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 82 ohms

2 Watt 5% Carbon Film Resistor 82 ohms

Metal Film Fusible Resistor 3/4 Watt (0.75 Watt) 5% 82 ohms

9-10 Watt 5% Wire-wound Resistor 82 ohms

 resistors may vary from Illustrations

14 Watt 5% Wire-wound Resistor 82 ohms

3 Watt 5% Wire-wound Resistor 82 ohms

5-6 Watt 5% Wire-wound Resistor 82 ohms

resistors may vary from Illustrations

Carbon Film Resistor 1/2 Watt 5% 10 Pack. 820 ohms

SUNON High Quality Electronic Cooling Fan.  220-240VAC 80x80x38mm 23CFM.

2450RPM typ. Noise <33dB. Metal Clad.

Battery Charger for Li-Ion and Ni-MH batteries, including popular 18650

• Automatic 3A Fast Charge and Trickle Charge when using the included QC 3.0 USB power supply or similar

• LED indicators for charging statu

• Battery test function can tell you the true capacity of a battery 

• Charges 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650 and 32650 Lithium Ion Batteries

• Charges AAAA, AAA, AA, A, Sub-C, C and D NiMh Batteries

• Plugs into a standard USB Type A socket like a mobile phone charger or PC

• Overcharging protection, short-circuit protection and protection against reverse polarity

• Power Required 5V @ 3A QC Charger supplied (will work on less at a lower charging rate)

• Capacity grading (single-slot)

• Displays  

With the supplied QC 3.0 power supply, this charger is capable of the following charging speeds:

• 4 Cells at 1A
• 2 Cells at 2A
• 1 Cell at 3A

av:link M8S Active Subwoofer in Wooden Cabinet with 8 inch Speaker

• Active sub cabinet with 8" (20cm) reinforced driver and internal amplifier with active filter circuit.
• Inputs are on twin RCA phonos or from a stereo amplifier on spring terminals (between amp and mid-top speakers). 
• Cutoff frequency and Gain rotary controls can be adjusted as required. "Auto Off" function deactivates the amplifier when no incoming signal is detected to conserve energy.

A Very High Quality Porcelain (Ceramic) B7G Valve Base (Tube Socket), with heavy gold plating. Test Voltage: 1600V, Insulation resistance >10,000M ohms, Contact resistance: < 10milliohms. For Many small Valves inc EB91, EF95, Z77, EL90, EK91, EL95, N77, 6AM5, 6AL5 etc.

A Very High Quality Porcelain (Ceramic) B7G Nickel Plated Valve Base (Tube Socket).

Test Voltage: 1600V, Insulation resistance >10,000M ohms,

Contact resistance: < 10milliohms. For Many small Valves inc EB91, EF95, Z77, EL90, EK91, EL95, N77, 6AM5, 6AL5 etc.

B9A Valve Base 9 pins (Tube Socket). High quality porcelain, with gold plating. Testing Voltage: 1600V, Insulation resistance >10,000M ohms, Contact resistance: < 10milliohms. For many Mullard, Brimar, Mazda etc valves inc EF86, EL84, ECC81, ECC82, ECC83, 12AX7, 12AU7, 12AT7 etc

A Very High Quality Porcelain (Ceramic) B9A Valve Base (Tube Socket) 9 pins.

Bright Nickel plating.

Test Voltage: 1600V, Insulation resistance less than 10,000M ohms,

Contact resistance: less than 10milliohms.

For many Mullard, Brimar, Mazda and American Valves inc EF86, EL84, ECC81, ECC82, ECC83, ECC85, ECC88, 12AX7, 12AU7, 12AT7 etc

A Very High Quality Porcelain (Ceramic) B9A Valve Base (Tube Socket) with Screening Can

9 pins with a screening can and shield on the base. Heavy Nickel plated Pins. Test Voltage: 1600V, Insulation resistance >10,000M ohms, Contact resistance: < 10milliohms.

For many Mullard, Brimar, Mazda, EF86, EL84, ECC81, ECC82, ECC83, and American valves inc12AX7, 12AU7, 12AT7 etc.

A Very High Quality Porcelain (Ceramic) B9A Valve Base (Tube Socket) 9 pins for printed circuit mounting. Heavy gold plating. Test Voltage: 1600V, Insulation resistance >10,000M ohms, Contact resistance: < 10 milliohms. For many Mullard, Brimar, Mazda etc valves inc EF86, EL84, ECC81, ECC82, ECC83, 12AX7, 12AU7, 12AT7 etc. Printed circuit Mounting

Bulgin 8 pin Chassis Socket 250V 6A P552 PX0552

Mates with Cable Entry Plug PX0551

Velcro Cable Tie Black 5m Roll Cut to Size

Ceramic Fitting Accepting a GU10 reflector lamp in to an E14 (14mm) Screw Fitting