Search Results

Cable Ties 200mm Long. Non-reusable. White 100 pack

Cable Ties 300mm Long. Non-reusable. White 100 pack

Male & Female JST SM leads commonly used with LED strips. 140mm long

Battery Charger for Li-Ion and Ni-MH batteries, including popular 18650

• Automatic 3A Fast Charge and Trickle Charge when using the included QC 3.0 USB power supply or similar

• LED indicators for charging statu

• Battery test function can tell you the true capacity of a battery 

• Charges 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650 and 32650 Lithium Ion Batteries

• Charges AAAA, AAA, AA, A, Sub-C, C and D NiMh Batteries

• Plugs into a standard USB Type A socket like a mobile phone charger or PC

• Overcharging protection, short-circuit protection and protection against reverse polarity

• Power Required 5V @ 3A QC Charger supplied (will work on less at a lower charging rate)

• Capacity grading (single-slot)

• Displays  

​With the supplied QC 3.0 power supply, this charger is capable of the following charging speeds:

• 4 Cells at 1A
• 2 Cells at 2A
• 1 Cell at 3A

Solderless Plug-In Breadboard 0.1 inch - 2.54mm spacing.

400 Points. 2 x 30 x 5 commoned points. 4 rows of 25 points. Self-adhesive backing, or use free-standing.

deal for experiments & prototyping.

Solderless Prototype Plug-In Breadboard 0.1 inch - 2.54mm spacing

Ideal for experiments & teaching. 830 Points. 2 x 63 x 5 and 4 x 10 commoned points.

63 rows of 5 points. Self-adhesive backing (or use free-standing).

Can be used over and over again for prototyping circuits.

Useful numbered grid. Accepts IC sockets, ICs and pin strips, transistors, resistors capacitors, LEDs, diodes, wire, etc

9.5mm 20 Turn Precision Cermet Preset Top adjust. 10 ohms

Miniature Push to BREAK. Release to MAKE 125VAC 500mA, With 2 Solder Tags.

Dimensions 27.5mm long, 9.7mm diameter. 7mm nut. Black Button

Miniature Push to BREAK. Release to MAKE 125VAC 500mA, With 2 Solder Tags.

Dimensions 27.5mm long, 9.7mm diameter. 7mm nut. Red Button

Bulgin 8 pin Mains Plug 250V 6A P551, PX0551

The PX0551 is a 8-pole  Cable-Entry Male Circular Connector with screw terminals.

Glass-filled nylon moulding and nickel plated brass contacts. Mates with PX0552

QTX 15 inch Moulded ABS PA 500W max Speaker Box

Compact & lightweight 500W ABS speaker cabinet designed for sound reinforcement. A shockproof enclosure with M8/M6 fittings, allowing arrays in various combinations for venues from small halls to large nightclubs.

• SPK connectors
• 15” Heavy Duty 500W Speaker 8 ohms
• Rigid steel grille and easy-carry handle
• Multiple mounting points
• Titanium compression driver
• Lightweight moulded enclosure
• 35mm internal pole-mounting

Power rms: 250W

Power max: 500W

Woofer: 380mm (15")

Freq response: 45Hz-20KHz

SPL @ 1W/1m: 101dB

Connectors: 2 x SPK

Dims: W 430 front/250 rear x 680 x 360mm

Weight: 14.5kg

Red & Black 2 core Fig 8 Power Cable For Loudspeaker & other uses up to 2.5Amps. 2.3mm x 4.6mm diameter. Priced per Metre

Strands: 2 x (7 x 0.18mm Cu + 7 x 0.18mm)

CSA: 0.36mm squared

Smart Line Tracking Car Kit

Simple line tracking robot car kit that is designed to introduce people of all ages to electronics and soldering.

The red LEDs (on the bottom) illuminate the surface in front of the car and the LDRs (light dependent resistors) pick up the reflection off the surface. The comparator (LM393) will then determine if the car is following the line and make the necessary adjustments. R1 and R2 potentiometers are used to adjust the sensitivity of the LDRs.

Requires 2 x AA batteries (not included). 

Tools required: soldering iron, side cutters, Philips screwdriver

SMD Component Solder Practice Kit

Surface-mount PCB including components; ideal for learning surface-mount soldering. When the components are soldered correctly, the LEDs should flash and alternate. This kit has the following SMD packages: 0402, 0603, 0805, 1206 and SOT-23. Requires 3-12V DC to operate the circuit.


 

BNC Plug Solder 50 ohms
For use with RG58 5mm cable. Turned gold plated pin & PTFE insulator.

Coax Splitter Diecast 2 Males to 1 Female. Fully screened in solid metal

Hi Fi Foam Edge Full Range 10 inch (250mm) 60W Max. 40W RMS

A Good dynamic Hifi Speaker with full-range performance.

*  Rolled foam edge
*  Twin Paper Cones

Power Max: 60W
Power RMS: 40W
Freq Response: 20Hz–4.2KHz
SPL: @ 1W/m: 86dB
Voice Coil dia: 62.5mm
Weight: 1.7kg

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 119 x 455mm

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 25 X 64mm

Easy soldering

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 48 x 133mm

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 64 X 95mm

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) sacing 95 X 127mm

Stripboard 2.54mm - 0.1 inch Copper Strips perforated at 0.1 inch (2.54mm) spacing 95mm x 432mm

Croc-clip. 45mm long with Black Insulated handles with Screw connection and 4mm socket for banana plug

Croc-clip. 45mm long with Red Insulated handles with Screw connection and 4mm socket for banana plug

Tesla Coil Kit with Audio Input

Amaze your friends with this cool musical tesla coil kit. When fully assembled, this module will act as a tesla coil which will play audio through the arcs when an audio source (e.g. phone, laptop) is connected to the audio input of the coil. It runs on 15-24V DC, either from batteries or a power supply (not included). 

 

Power Input: 12-24V DC, 2.1 x 5.5mm 
Audio Input: 3.5mm stereo socket (only the left channel is active)
PCB Dimensions: 80 x 38mm

Please note: Tesla coils produce very high voltages; do not touch this device when it is turned on! This device produces intense radio frequency interference which can affect any electronic devices near it (e.g. pacemakers). Lastly, the arcs produced by Tesla coils can ignite flammable objects; keep all flammable objects away from the Tesla coil.

Coax Splitter or Joiner. One male plug to 2 female sockets.

Typical use: Plugs into TV socket for extension aerial to another TV

Coax Splitter Diecast 2 Females to 1 Male. Fully Screened in Solid Metal.

TV Full Motion 3 Joints for 14 to 55 inch for loads up to 30 kg

This TV wall mount bracket can tilt, swivel and rotate, providing full flexibility for exacting viewing angles.
Includes all required installation materials and manual.

Features
Min. screen size: 14" / 58 cm
Max. screen size: 55" / 139 cm
Tilt, swivel and rotate flexibility
Supports 30 kg

Package contents
1x TV wall mount
1x installation materials
1x manual