Search Results

3 + 3 Way Easy to use Installation Terminal Block

A simple to use terminal block (splicing connector). Simply lift the lever, insert a stripped wire and then close the lever to make a reliable and electrically safe connection between 2 wires.

different colours are individually isolated

Rated Voltage: 240V
Rated Current: 32A
flame retardant material
colour coded handles

3 Way Easy to use Inatallation Terminal Block

A simple to use terminal block (splicing connector). Simply lift the blue lever, insert a stripped wire and then close the lever to make a reliable and electrically safe connection between 3 wires. 

Rated Voltage: 400V
Rated Current: 32A
Wire Cross Section: 0.14 - 4mm²
Insulation: PA66 Nylon
Contact Plating: Phosphor Copper

4 Way Easy to use Inatallation Terminal Block

A simple to use terminal block (splicing connector). Simply lift the blue lever, insert a stripped wire and then close the lever to make a reliable and electrically safe connection between 4 wires. 

Rated Voltage: 400V
Rated Current: 32A
Wire Cross Section: 0.14 - 4mm²
Insulation: PA66 Nylon
Contact Plating: Phosphor Copper

5 Way Easy to use Inatallation Terminal Block

A simple to use terminal block (splicing connector). Simply lift the blue lever, insert a stripped wire and then close the lever to make a reliable and electrically safe connection between 5 wires. 

Rated Voltage: 400V
Rated Current: 32A
Wire Cross Section: 0.14 - 4mm²
Insulation: PA66 Nylon
Contact Plating: Phosphor Copper

Intelligent Battery Charger for Li-Ion batteries including 18650

• Automatic 0.5A Fast Charge and Trickle Charge

• LED indicators for charging status

• Charges 10440, 17335, 18650, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18700, 22650, 25500, 26650 Batteries

• Plugs into a standard USB socket like a mobile phone charger or PC

• overcharging protection, short-circuit protection and protection against reverse polarity

• Dimensions:  92 x 40 x 32mm

• Power Required 5V @ 1A (will work on 0.5A at a lower charging rate)

Batteries not included

LED Jack-o'-lantern Solder Practice Kit and Halloween Decoration

Practice your soldering in style with this simple flashing LED circuit. It uses a CD4017 decade counter IC to flash the LEDs sequentially. The rate of flashing and brightness can be adjusted via two potentiometers, which also act as a stand for the jack-o'-lantern. It can be powered by a 9V PP3 battery or a 6 x AA battery holder (not supplied).

Included in the kit:
1kΩ carbon film resistor x 1
680Ω carbon film resistor x 6
4.7µF 63V electrolytic capacitor x 1
10nF ceramic capacitor x 1
10µF 25V electrolytic capacitor
NE555N timer IC x 1
CD4017 decade counter IC x 1
5mm green LED x 1
5mm orange LED x 14
100k Linear 9mm vertical potentiometer x 1
50k Linear 9mm vertical potentiometer x 1
PP3 hard plastic battery snap x 1
8-pin IC socket x 1
16-pin IC socket
Jack-'o-lantern PCB x 1
Instructions

LED Lighthouse Solder Practice Kit

This simple flashing LED circuit is great for learning how to solder or to polish up on your soldering skills. It uses a 555 timer in the astable configuration to flash the LEDs continuously. The rate of flashing can be changed by adjusting the variable trimmer potentiometer R2 (f ≈ 0.3Hz-30Hz). It can be powered by a 9V PP3 battery (not supplied).

The kit is supplied with Yellow LEDs by default but you can choose Red, Blue, Green or White LEDs from the drop-down list above.

Miniature Toggle Switch DPDT Centre-off - Biased Momentary One Way. Latching the other way.

125VDC 5A max. 33 x 13 x 12mm M6 Nut.

Relay Single Pole Changeover 12V 3A @ 125VDC 400 ohms. Operating Range 9V to 14V

Relay Single Pole Changeover 12V. 3A @ 125VDC 1600 ohms. Operating Range 18V to 36V

Monacor - Super High Definition Bipolar Audio Axial Capacitor

Extra Low Loss Polypropylene Film 1uF 250V. ±5% Tolerance

Size 9x31mm

Datasheet

Battery holder for single N cell. 13.5 x 35mm approx. 14mm PCB pins.

Fits N cells, MN21, GP23A, VR22, A22, A23, LN08, L1028 etc

Non-Contact Metal Detector Kit

Basic metal detector sensor module with buzzer and LED alarm. Will detect metal at a range of up to 60mm, including through soil, cothing, etc. Requires an input voltage of 3-5V DC, which can be supplied to the module via the 2 pin screw terminal (e.g. battery pack, USB, power supply). The sensitivity can be adjusted by the VR1 potentiometer.



 

Nylon Nut. M3 (3mm dia Metric thread) 10 pack

Nylon Cheesehead Screw Slotted. M3 (3mm dia Metric thread) 12mm long. 10 pack

Nylon Cheesehead Screw Slotted. M3 (3mm dia Metric thread) 20mm long 10 pack

Very High Quality Porcelain (Ceramic) Octal Valve Base (Tube Socket). 8 pins. Heavy Gold Plating. Test Voltage: 1600V, Insulation resistance >10,000M ohms, Contact resistance: < 10 milliohms. For many Large Output Valves inc EL34, KT66, KT88, 6L6, 6551, 5881, GZ34, 5U4G. Versatile flange can be mounted above or below the chassis.

A Very High Quality Porcelain (Ceramic) Octal Valve Base (Tube Socket) 8 pins. Durable Plating.

• Test Voltage: 1600V,
• Insulation resistance >10,000M ohms,
• Contact resistance: < 10 milliohms.
• For many Large Output Valves inc EL34, KT66, KT88, 6L6, 6551, 5881, GZ34, 5U4G.
• Versatile flange can be nounted above or below the chassis.

Very High Quality Porcelain (Ceramic) Octal Valve Base (Tube Socket), 8 pins. Heavy Gold Plating. Test Voltage: 1600V, Insulation resistance >10,000M ohms, Contact resistance: < 10 milliohms. For many Large Output Valves inc EL34, KT66, KT88, 6L6, 6551, 5881, GZ34, 5U4G. Printed Circuit (PCB) type.

Cable Ties 100mm Long. Non-reusable. Black 100 pack

Black Cable Ties 200mm Long. Non-reusable. 100 pack

Cable Ties 300mm Long. Non-reusable. Black 100 pack

Cable Ties 100mm Long. Non-reusable. White 100 pack

Cable Ties 200mm Long. Non-reusable. White 100 pack

Cable Ties 300mm Long. Non-reusable. White 100 pack

Male & Female JST SM leads commonly used with LED strips. 140mm long

Power Bank 10,000mA Capacity with USB-A and USB-C

Solderless Plug-In Breadboard 0.1 inch - 2.54mm spacing.

400 Points. 2 x 30 x 5 commoned points. 4 rows of 25 points. Self-adhesive backing, or use free-standing.

deal for experiments & prototyping.

Solderless Prototype Plug-In Breadboard 0.1 inch - 2.54mm spacing

Ideal for experiments & teaching. 830 Points. 2 x 63 x 5 and 4 x 10 commoned points.

63 rows of 5 points. Self-adhesive backing (or use free-standing).

Can be used over and over again for prototyping circuits.

Useful numbered grid. Accepts IC sockets, ICs and pin strips, transistors, resistors capacitors, LEDs, diodes, wire, etc