Search Results

18 inch 1100 Watt, 600W RMS 8 ohm, Heavy Duty Sub-Woofer

Heavy-duty Steel frame, incorporating a large 3"/10cm Diameter Voice Coil, Cloth edged reinforced paper cone.

Specially Designed to produce high amplitudes at very low frequencies without distortion. Excellent reliability.


*  1100W max, 600W rms
*  80 oz Magnet
*  8 0hms
*  Freq Response 45Hz - 3KHz
*  SPL @ 1W - 1m 97dB
*  Weight 9.2Kg
 

18 Way Header Socket, 2.54mm Pitch

1 row of 18 pins 2.54mm (0.1") Pitch

14 Watt 5% Wire-wound Resistor 1K ohms

Metal Film Resistor 1% Tolerance 1/4W 250V max 3.3K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 3.6K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 3.9K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 4.3K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 4.7K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 5.1K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 5.6K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 6.2K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 6.8K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 7.5K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 8.2K ohms. 10 pack

Metal Film Resistor 1% Tolerance 1/4W 250V max 9.1K ohms. 10 pack

120mm Fan Finger Guard.

Pair of Battery Holder Clips for 18650 Batteries.

These clips are designed to safely hold single or multiple 18650 batteries in place to make a custom battery pack. They interlock together while keeping the required air space between each cell to prevent overheating of the pack. 

You will get a Pair of clips that will be hold 1 battery. 

Surface-Mounted 18650 Battery Holder for 4 Batteries

Axial Miniature Inductor/RF Choke, Tolerance 10% 100uH

Linear Control Pot 24mm with 6mm x 42mm round spindle with flat part 10K Lin 20%

19 Way Header Socket, 2.54mm Pitch

1 row of 19 pins 2.54mm (0.1") Pitch

6V 50mA. LES  E5 T1.5 Miniature Screw fit Lamp. 5mm dia, 17mm length.

6V 60mA. LES T1.5 Miniature Lamp. 5mm dia, 27mm length. NO LONGER STOCKED Please go to similar lamp LE605

CAT5E High Quality Shielded Network Cable. RJ45 8 pin connector on each end. Cross-over connections. 5 metres long

Battery holder for 2 X D Batteries. In series for 3V total. PP3 snaps

Self Tapper. No 10 (4.8mm) 13mm long. Pan Head Bright Pack of 100

Relay DPDT 5V Coil. Each Contact 10A @ 250VAC.10A @ 30VDC. 47 ohms. Operating Range 3.75V-5.5V. Silver Alloy Contacts.

Polypropylene Radial Capacitor 1700VDC p-p 5% type MKP375 or similar 27.5mm pitch 11nF (0.011uF)

Polypropylene Radial Capacitor 1600VDC p-p 1% type MKP375 or similar 22.5mm pitch 12nF (0.012uF)

Polyester Stacked Foil Capacitor, low Inductance, 7.5mm pin spacing, 5% Tolerance. EPCOS (Was Siemens) 12nF 400V (0.012uF)