Search Results

Mercury Switchable Mains soldering iron with a high temperature ceramic element for fast heating

2 Wattage settings of 130W and 20W allows both standard and delicate soldering. Holding the switch gives you a boost of power when you need it and the standard 20W setting helps stability and long life.

Fitted with a high power switch, 1.2m cable with sealed mains plug. Comes with small stand.

• Soldering  Bits (tips) available
• Ceramic element for fast heating
• Provides stable and constant heat
• Supplied with stand
• Power supply 230Vac, 50Hz
• Power 20W/130W
• Lead length 1.2m
• Iron length 215mm
• Weight 120g

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 1

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 2

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 3

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 4

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 5

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 6

47dB Microphone Preamplifier Kit

This deceptively simple 2 stage transistor preamp kit provides a remarkably clear boost to allow a microphone to be used in a standard line level input.   

• Instructions x 1
• PP3 9V Battery Clip x 1 
• 1µF Boxpoly Capacitor x 2
• 100nF Ceramic Capacitor x 1
• 10µF Ceramic Capacitor x 1
• 100µF Electrolytic Capacitor x 1
• 22kΩ 1/4W Carbon Resistor x 1
• 4.7MΩ 1/4W Carbon Resistor x 1
• 1MΩ 1/4W Carbon Resistor x 1
• 3.3kΩ 1/4W Carbon Resistor x 1
• 47kΩ 1/4W Carbon Resistor x 1
• BC547B Transistor  x 2
• Neutrik NYS2152 1/4" (6.3mm) Jacks x 2
• PCB x 1

Technical Specifications:

Input Voltage: 9VDC
Gain: 47dB
THD: < 0.5%

Neutrik NL4MP Standard 4 Pole Speakon Chassis Connector

With Solder Contacts 

Current Rating  30A rms continuous

Operating Voltage 250 Vac

Nickel Plated Steel Strip 0.1 x 5mm 10M Roll

Ideal for spot welding battery cells

Nickel Plated Steel Strip 0.1 x 8mm 10M Roll

Ideal for spot welding battery cells

Pack of 100 Double Sided Circuit Pins to fit 0.1 inch 2.5mm Strip Board, Matrix Board & Plain Board

Pack of 100 Single Sided Circuit Pins to fit 0.1 inch 2.5mm Strip Board, Matrix Board & Plain Board

Plastic recessed bar handle in black with fixing holes.

• Cut Out (mm): 136x169
• Colour: Black
• Cut Out: 136x169mm
• Dimensions 60x175x208mm
• Weight (kg): 0.17

Portable 600A Spot Welder
 

This small but mighty battery-powered portable spot welder is ideal for making or fixing battery packs; on-the-go or at home. It has 9 different power levels which can be adjusted by pressing the button on the back of the unit. 

To use it, simply turn it on by pressing and holding the button on the back and select the power level using the same button (see chart below). Hold the copper tip of either of the welding probes firmly on the nickel strip and press the other probe on the strip for a couple of seconds.

Charging Input: USB type-C
Battery Capacity: 5500mAh
Max. Output Current: 650A @ 4.2V
Welding Thickness: 0.1-0.15mm

16mm diameter Dual Control Pot with knurled & Slotted 6mm dia spindle. PCB Pins 5mm spacing. 1M Log

20mm Shaft

Relay DPDT 12V Coil. Each Contact 8A @ 250VAC. 5A @ 30VDC. 275 ohms. Operating Range 9V-13.2V. Silver Alloy Contacts.

Relay DPDT 24V Coil. Each Contact 8A @ 250VAC. 5A @ 30VDC. 1100 ohms. Operating Range 18V-26.5V. Silver Alloy Contacts.

Vertical Preset Carbon Small Dustproof, 5 x 2.5mm spacing 100 ohms

This item is no longer available 
Click here for a 250 ohms

Vertical Preset Carbon Small Dustproof, 5 x 2.5mm spacing 250 ohms

9.5mm 20 Turn Precision Cermet Preset Top adjust. 200 ohms

RAT-in-a-CAN Distortion Effect Kit

A distortion unit based on the legendary Pro Co RAT pedal from 1978. 

  We decided to make a RAT clone to rival the original “Pro Co RAT” and the best way to do this is to use the original Op Amp that gives the RAT its unique sound, the LM308. As the original LM308N is basicaly unavailable (not counting all the fakes on the market), we decided to use the MLM208G, Motorola's industrial version of the LM308N (industrial version = operates at a wider temperature range). We have some of these original MLM208G ICs from the 70’s in our stocks so we figured we could make a great clone using them, and we were right. There is a slight difference in the fact that the original Pro Co RAT used the LM308N (an 8 Pin Plastic package) and we have the MLM208G (an 8 Pin Metal can). The 2 chips are identical in how they work and sound but our one is in a metal can, we decided to celebrate this difference in our design and so the “RAT in a Can” was born. 

   Unlike other modern clones that use “similar” Op Amps that can often sound a bit muddy and bass heavy, the RAT in a Can will give you gut-wrenching harsh fuzz and an astronomically high gain, this pedal is sure to make your guitar scream like a pack of angry rats.

  We hope you have as much fun building and using your RAT in a Can as we did designing and naming it.

Included in the kit

Red & Black 2 core Fig 8 Power Cable For Loudspeaker & other uses up to 2.5 Amps.

Diameter: 2.3mm x 4.6mm. Priced per 100 Metre Drum. Also available in shotr cuts - please go to ZL26

Strands: 2 x (7 x 0.18mm dia Cu + 7 x 0.18mm)

CSA: 0.36mm Squared

Rugged USB-C to USB-C High Speed Cable 1 Metre With Gold Plated Connectors

High Quality Slimline Wall Bracket for Flat Screens 17 to 42 inches up tp 35Kg

A Fixed Wall Bracket suitable for screens of 17 to 42 inches
Strong materials and built in spirit level ensure safe and easy mounting.

* Screen size: 17-42 inches"
* Max. weight: 35 kg
* Material: Steel
* Multiple Fixing Holes
* Close to wall mounting
* Colour Black
* VESA: 75 x 75 - 100 x 100 - 100 x 200 - 200 x 200