Search Results

USB-C to USB-C 100W High Speed Cable 2 Metre

USB-C to USB-C High Speed Cable 1 Metre

USB-C to USB-A  USB3.0 on the go adaptor.

 VU Audio Level Display Kit

Simple LM3914-based VU display kit with 10 segment LED display and input trim potentiometer. The resistors included in the kit make it a 0V-1.4V display 

• Instructions x 1
• 100Ω Carbon Resistor x 1
• 4.7kΩ Carbon Resstor x 1
• 10k Trim Potentiometer
• LM3914 (this kit can be also used with LM3915 and LM3916)
• 10-Segment Bar Display
• 20 pin IC socket (to be used with the display)
• PCB x 1

Technical Specifications:

Input Voltage: 5VDC
Signal Range: 0V-1.4V

Warton Metals High Quality 60/40 Solder Wire 0.7mm diameter 500 grams

Warton Metals High Quality 60/40 Solder Wire 1.2mm diameter 500 grams

Axial Electrolytic Capacitor. Low leakage. 100uF 450V. 25x57mm. Ripple Current 325mA @ 120Hz

Battery Holder for 2 x C batteries. In series. PP3 snaps

qtx QR12PA 12 inch 200W RMS Active Portable PA Unit

Torch Bulb MES 11mm (10mm) Screw Pre-focus 1.2V 220mA

3.5mm stereo jack to two RCA plugs audio lead with slimline metal body for connecting mobile phones or personal audio players to RCA line inputs.

Cable Diameter: 3mm
Conductor: 2 x 10/0.1mm
 

Lead 3.5mm stereo plug to 3.5mm stereo plug DISCONTINUED - Please go to L7P&K1

Metallised Polyester Dipped Capacitor 250VDC Tolerance 5% 1.5uF

Metallised Polyester Dipped Capacitor 250VDC Tolerance 10% 2.2uF

22 Way Header Socket, 2.54mm Pitch

1 row of 22 pins 2.54mm (0.1") Pitch

Axial Electrolytic Capacitor. Low leakage. 220uF 25V

Torch Bulb MES 11mm (10mm) Screw Pre-focus 3.7V 300mA

3.5mm Stereo Jack-plug 4 pole plug. (Tip Ring, Ring Sleeve) Soft Plastic Body with Flexible Cable Protector

Battery Holder for 4 C Batteries. 2 long x 2 wide.

All in series to give 6V total. PP3 snaps

Black Plastic Knob with Green Insert & White Pointer. 

Metal Bush with grub-screw. For 6.3mm spindle

Diameter 10mm top,15mm bottom, Height 20mm

Monacor - Super High Definition Bipolar Audio Axial Capacitor

Extra Low Loss Polypropylene Film 2.2uF 250V ±5% Tolerance

Size 13x31mm

qtx QR15PA 15 inch Active Portable PA Unit

Contains a Built-in amplifier operating from mains or internal rechargeable battery, powering a 15 inch main driver and compression driven horn unit.
A pair of VHF handheld wireless microphones are included with the receiver built into the mixer/amp section at the rear along with 2 further mic inputs, auxiliary line input and integral USB/SD media player. A moulded handle and pole mount are included and a retractable trolley handle and rear wheels provide easy portability.

Specs

• Echo effect for microphones
• 2 x VHF handheld microphones included
• Integral USB/SD digital audio player with remote
• Mains/rechargeable operation
• Built-in trolley facility
• Switchable VCV "mic override" function
• Moulded handle and internal 35mm pole fitting
• Optional neck worn transmitter available
• Power supply: 220-240Vac, 50/60Hz, External/internal battery.
• Bass Driver: 380mm 15 inch Speaker
• HF driver: 25mm (1inch) Titanium compression driver
• Freq Response: 45Hz – 20KHz

Battery life: Up to 8 hours
Controls: Volume, Bass, Treble, Echo, Mic volume, VCV & VHF mic levels
Inputs: 2 wired mic (jack) and aux (RCA & 3.5mm)
Wireless mic freq: 174.1MHz + 175.0MHz
Power Handling: 250W rms
Weight: 18.4Kg

Black Plastic Knob with Red Insert & White Pointer. 

Metal Bush with grub-screw. For 6.3mm spindle

Diameter 10mm top,15mm bottom, Height 20mm

Black Plastic Knob with Yellow Insert & White Pointer. 

Metal Bush with grub-screw. For 6.3mm spindle

Diameter 10mm top,15mm bottom, Height 20mm

Axial Electrolytic Capacitor. Low leakage. 220uF 100V

Strong Solid Plastic PP3 9 Volt  Battery Snaps.

100mm long lead with molded centre-positive 2.1 x 5.5mm DC connector. Great for powering Arduino or other similar boards off a battery. 

Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more  batteries

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 1K ohm

2 Watt 5% Carbon Film Resistor 1K ohm

24 Way Header Socket, 2.54mm Pitch

1 row of 24 pins 2.54mm (0.1") Pitch

Strong Solid Plastic PP3 9 Volt  Battery Snaps.

With 150mm Red & Black PVC covered wires emerging at one end.

Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more  batteries