Search Results

High Quality USB-C to Lightning connector for iPhone/iPod/iPad Lightning

High Speed USB to USB-C Lead for Charging and Data 1 metre long

USB-A to USB-C cable with 56K resistor for safe charging

N50 High Speed Micro Motor

Extruded Finned Aluminium Heatsink, 120mm x 69mm x 36mm

Material: 6063-T5 Aluminium

TermoPasty High Quality Lead-Free Solder Paste Sn96.5, Ag3, Cu0.5, 6grams

96.5% Tin
3% Silver
0.5% Coper
12% Flux content (halide-free, No Clean, REL0, non corosive, transparent)
Melting Point: 217C

Lightning to 3.5mm Stereo Adapter

Monacor LSIP-18/1 180µH (0.18mH) High Quality Air-Core Inductor

Air core coil, 0.18 mH Medium wire thickness (1 mm), for general applications, for constructing high-quality crossover networks of high-power rating.

Nominal Inductance: 0.18mH
Power rating: 150W
Wire diameter: 1mm
DC resistance: 0.2Ω
Dimensions: 48mm (d) x 19mm (h)

Datasheet can be found in the "Files" tab

Spare Soldering iron for SL30C Temperature Controlled Soldering Stations.

Mercury Switchable Mains soldering iron with a high temperature ceramic element for fast heating

2 Wattage settings of 130W and 20W allows both standard and delicate soldering. Holding the switch gives you a boost of power when you need it and the standard 20W setting helps stability and long life.

Fitted with a high power switch, 1.2m cable with sealed mains plug. Comes with small stand.

• Soldering  Bits (tips) available
• Ceramic element for fast heating
• Provides stable and constant heat
• Supplied with stand
• Power supply 230Vac, 50Hz
• Power 20W/130W
• Lead length 1.2m
• Iron length 215mm
• Weight 120g

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 1

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 2

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 3

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 4

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 5

Micro USB Socket PCB mounting. Up to 12Mbps. 5000 mating cycles. Tin plated contacts.

Type 6

47dB Microphone Preamplifier Kit

This deceptively simple 2 stage transistor preamp kit provides a remarkably clear boost to allow a microphone to be used in a standard line level input.   

• Instructions x 1
• PP3 9V Battery Clip x 1 
• 1µF Boxpoly Capacitor x 2
• 100nF Ceramic Capacitor x 1
• 10µF Ceramic Capacitor x 1
• 100µF Electrolytic Capacitor x 1
• 22kΩ 1/4W Carbon Resistor x 1
• 4.7MΩ 1/4W Carbon Resistor x 1
• 1MΩ 1/4W Carbon Resistor x 1
• 3.3kΩ 1/4W Carbon Resistor x 1
• 47kΩ 1/4W Carbon Resistor x 1
• BC547B Transistor  x 2
• Neutrik NYS2152 1/4" (6.3mm) Jacks x 2
• PCB x 1

Technical Specifications:

Input Voltage: 9VDC
Gain: 47dB
THD: < 0.5%

Neutrik NL4MP Standard 4 Pole Speakon Chassis Connector

With Solder Contacts 

Current Rating  30A rms continuous

Operating Voltage 250 Vac

Nickel Plated Steel Strip 0.1 x 5mm 10M Roll

Ideal for spot welding battery cells

Nickel Plated Steel Strip 0.1 x 8mm 10M Roll

Ideal for spot welding battery cells

Pack of 100 Double Sided Circuit Pins to fit 0.1 inch 2.5mm Strip Board, Matrix Board & Plain Board

Pack of 100 Single Sided Circuit Pins to fit 0.1 inch 2.5mm Strip Board, Matrix Board & Plain Board

Plastic recessed bar handle in black with fixing holes.

• Cut Out (mm): 136x169
• Colour: Black
• Cut Out: 136x169mm
• Dimensions 60x175x208mm
• Weight (kg): 0.17

Portable 600A Spot Welder
 

This small but mighty battery-powered portable spot welder is ideal for making or fixing battery packs; on-the-go or at home. It has 9 different power levels which can be adjusted by pressing the button on the back of the unit. 

To use it, simply turn it on by pressing and holding the button on the back and select the power level using the same button (see chart below). Hold the copper tip of either of the welding probes firmly on the nickel strip and press the other probe on the strip for a couple of seconds.

Charging Input: USB type-C
Battery Capacity: 5500mAh
Max. Output Current: 650A @ 4.2V
Welding Thickness: 0.1-0.15mm

16mm diameter Dual Control Pot with knurled & Slotted 6mm dia spindle. PCB Pins 5mm spacing. 1M Log

20mm Shaft

DPDT Power Relay with 12VDC Coil, 10A @ 250VAC Contacts, supplied with easy to use Din Rail mounting base

• Model: LY2NJ (8 pins)
• Coil Voltage: 12VDC
• Coil Resistance: 160 Ohms
• Contact Structure: 8 pins 2 normally open 2 normally closed
• Contact capacity: 10A 250VAC
• Pull-in voltage: ≤80% (V)
• Release voltage: DC: ≥10% (V), AC: ≥30%
• Contact resistance: ≤50 (mΩ)
• Insulation resistance: ≤100 (mΩ)
• Dimensions: 27.5 × 21 × 35.3mm (relay)
• Dimensions: 71.8 x 30.3 x 22.4 mm (Base)
• Action time: 20ms or less
• Reset Time: 20ms or less
• Operating frequency:
• Mechanical 18,000 cycles / hour
• Electrical 18,000 times / hour

Relay DPDT 12V Coil. Each Contact 8A @ 250VAC. 5A @ 30VDC. 275 ohms. Operating Range 9V-13.2V. Silver Alloy Contacts.

DPDT Power Relay with 230VDC Coil, 10A @ 250VAC Contacts, supplied with easy to use Din Rail mounting base

• Model: LY2NJ (8 pins)
• Coil Voltage: 230VDC
• Coil Resistance: 13.3 Kilo ohms
• Contact Structure: 8 pins 2 normally open 2 normally closed
• Contact capacity: 10A 250VAC
• Pull-in voltage: ≤80% (V)
• Release voltage: DC: ≥10% (V), AC: ≥30%
• Contact resistance: ≤50 (mΩ)
• Insulation resistance: ≤100 (mΩ)
• Dimensions: 27.5 × 21 × 35.3mm (relay)
• Dimensions: 71.8 x 30.3 x 22.4 mm (Base)
• Action time: 20ms or less
• Reset Time: 20ms or less
• Operating frequency:
• Mechanical 18,000 cycles / hour
• Electrical 18,000 times / hour

Relay DPDT 24V Coil. Each Contact 8A @ 250VAC. 5A @ 30VDC. 1100 ohms. Operating Range 18V-26.5V. Silver Alloy Contacts.

Vertical Preset Carbon Small Dustproof, 5 x 2.5mm spacing 100 ohms

Vertical Preset Carbon Small Dustproof, 5 x 2.5mm spacing 250 ohms