Search Results

Metallised Polyester Dipped Capacitor 250VDC Tolerance 10% 2.2uF

22 Way Header Socket, 2.54mm Pitch

1 row of 22 pins 2.54mm (0.1") Pitch

Axial Electrolytic Capacitor. Low leakage. 220uF 25V

Torch Bulb MES 11mm (10mm) Screw Pre-focus 3.7V 300mA

3.5mm Stereo Jack-plug 4 pole plug. (Tip Ring, Ring Sleeve) Soft Plastic Body with Flexible Cable Protector

Battery Holder for 4 C Batteries. 2 long x 2 wide.

All in series to give 6V total. PP3 snaps

Black Plastic Knob with Green Insert & White Pointer. 

Metal Bush with grub-screw. For 6.3mm spindle

Diameter 10mm top,15mm bottom, Height 20mm

Monacor - Super High Definition Bipolar Audio Axial Capacitor

Extra Low Loss Polypropylene Film 2.2uF 250V ±5% Tolerance

Size 13x31mm

qtx QR15PA 15 inch Active Portable PA Unit

Contains a Built-in amplifier operating from mains or internal rechargeable battery, powering a 15 inch main driver and compression driven horn unit.
A pair of VHF handheld wireless microphones are included with the receiver built into the mixer/amp section at the rear along with 2 further mic inputs, auxiliary line input and integral USB/SD media player. A moulded handle and pole mount are included and a retractable trolley handle and rear wheels provide easy portability.

Specs

• Echo effect for microphones
• 2 x VHF handheld microphones included
• Integral USB/SD digital audio player with remote
• Mains/rechargeable operation
• Built-in trolley facility
• Switchable VCV "mic override" function
• Moulded handle and internal 35mm pole fitting
• Optional neck worn transmitter available
• Power supply: 220-240Vac, 50/60Hz, External/internal battery.
• Bass Driver: 380mm 15 inch Speaker
• HF driver: 25mm (1inch) Titanium compression driver
• Freq Response: 45Hz – 20KHz

Battery life: Up to 8 hours
Controls: Volume, Bass, Treble, Echo, Mic volume, VCV & VHF mic levels
Inputs: 2 wired mic (jack) and aux (RCA & 3.5mm)
Wireless mic freq: 174.1MHz + 175.0MHz
Power Handling: 250W rms
Weight: 18.4Kg

Black Plastic Knob with Red Insert & White Pointer. 

Metal Bush with grub-screw. For 6.3mm spindle

Diameter 10mm top,15mm bottom, Height 20mm

Black Plastic Knob with Yellow Insert & White Pointer. 

Metal Bush with grub-screw. For 6.3mm spindle

Diameter 10mm top,15mm bottom, Height 20mm

Axial Electrolytic Capacitor. Low leakage. 220uF 100V

Strong Solid Plastic PP3 9 Volt  Battery Snaps.

100mm long lead with molded centre-positive 2.1 x 5.5mm DC connector. Great for powering Arduino or other similar boards off a battery. 

Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more  batteries

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 1K ohm

2 Watt 5% Carbon Film Resistor 1K ohm

24 Way Header Socket, 2.54mm Pitch

1 row of 24 pins 2.54mm (0.1") Pitch

Strong Solid Plastic PP3 9 Volt  Battery Snaps.

With 150mm Red & Black PVC covered wires emerging at one end.

Fits 6LF22, LS9V, GP1604G-C1, 6LR6, MN1604, 6LP3146, 1604AU, CRV9, KF00492, 6LR61 and many more  batteries

Monlolythic Ceramic Capacitor 50V, Y5V dielectric. 2.5mm pitch 10nF (0.01uF)

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 1.2K ohms

2 Watt 5% Carbon Film Resistor 1.2K ohms

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 1.5K ohms

2 Watt 5% Carbon Film Resistor 1.5K ohms

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 1.8K ohms

2 Watt 5% Carbon Film Resistor 1.8K ohms

Very Low Impedance (Low ESR), Long Life, Audio Electrolytics. High Ripple. 105 deg C 100uF 35V 8 x 11mm

Very Low Impedance (Low ESR), Long Life, Audio Electrolytics. High Ripple. 105 deg C 100uF 63V 10 x 16mm

Very Low Impedance (Low ESR), Long Life, Audio Electrolytics. High Ripple. 105 deg C 120uF 35V 8 x 11mm

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 2.2K ohms

2 Watt 5% Carbon Film Resistor 2.2K ohms

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 2.7K ohms