Search Results

Over 13000 results found
Displaying results 13081 - 13110.

Page of 460

6800uF 6.3V Low Impedance (Low ESR) Radial Electrolytic Capacitor105 deg C

6800Y6V3

Very Low Impedance (Low ESR), Long Life, Audio Electrolytics. High Ripple. 105 deg C 6800uF 6.3V 16 x 25mm

£2.50

(inc VAT £3.00)
Quantity

6800uF 63V Electrolytic Can Capacitor by Samwha 35mm(D) x 40mm(H)

6800C63

Samwha 6800uF 63V 5A Ripple, 85C. SNAP-IN Electrolytic capacitor. 35d x 40h mm. Tolerance 20%.

Illustration for information purposes.

£5.00

(inc VAT £6.00)
Quantity

680K ohm 1/2 Watt Resistors Pack of 10

H680K
Carbon Film Resistor 1/2 Watt 5% 10 Pack. 680K ohms

£0.50

(inc VAT £0.60)
Quantity

680K ohm 1/4 Watt Resistors Pack of 10

Q680K

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 680K ohms

£0.50

(inc VAT £0.60)
Quantity

68K ohm 1% Metal Film 1/4 Watt Resistors Pack of Ten

M68K

Metal Film Resistor 1% Tolerance 1/4W 250V max 68K ohms. 10 pack

£0.50

(inc VAT £0.60)
Quantity

68K ohm 2 Watt Film Resistor 5%

2W68K

2 Watt 5% Carbon Film Resistor 68K ohms

£0.25

(inc VAT £0.30)
Quantity

68K ohms 10 Watt Wirewound Axial Resistor

10W68K

9-10 Watt 5% Wire-wound Resistor 68K ohms

£1.25

(inc VAT £1.50)
Quantity

68K ohms 14 Watt Wirewound Axial Resistor

14W68K

14 Watt 5% Wire-wound Resistor 68K ohms

£1.75

(inc VAT £2.10)
Quantity

75K ohm 1% Metal Film 1/4 Watt Resistors Pack of Ten

M75K

Metal Film Resistor 1% Tolerance 1/4W 250V max 75K ohms. 10 pack

£0.50

(inc VAT £0.60)
Quantity

80908003 - Philips/Vishay 5 to 57pF Blue Spot PTFE Film Trimmer Capacitor

CTR80908003

Teflon 5-57pF 300V Blue spot. Vishay (Was Philips) Teflon (PTFE) Film Trimmer Capacitor. 360 degree turning.

Temperature range -40 to 125 deg C

Also known as:

2222 809 08003 by Vishay

2222 809 08003 by Philips

2222 809 08003 by BC

£6.50

(inc VAT £7.80)
Quantity

820K ohm 1/2 Watt Resistors Pack of 10

H820K
Carbon Film Resistor 1/2 Watt 5% 10 Pack. 820K ohms

£0.50

(inc VAT £0.60)
Quantity

820K ohm 1/4 Watt Resistors Pack of 10

Q820K

Carbon Film Resistor 1/4 Watt 5% 10 Pack. 820K ohms

£0.50

(inc VAT £0.60)
Quantity

82K ohm 1% Metal Film 1/4 Watt Resistors Pack of Ten

M82K

Metal Film Resistor 1% Tolerance 1/4W 250V max 82K ohms. 10 pack

£0.50

(inc VAT £0.60)
Quantity

82K ohm 2 Watt Film Resistor 5%

2W82K

2 Watt 5% Carbon Film Resistor 82K ohms

£0.25

(inc VAT £0.30)
Quantity

8GB Micro SD Card

SU8

8GB High Spec Micro SD Card with Adaptor

£6.82

£3.00

(inc VAT £3.60) 56% Off
Quantity

91K ohm 1% Metal Film 1/4 Watt Resistors Pack of Ten

M91K

Metal Film Resistor 1% Tolerance 1/4W 250V max 91K ohms. 10 pack

£0.50

(inc VAT £0.60)
Quantity

DLN100KR

DLN100KR

Omeg Conductive Plastic 100K Dual Linear 16mm Control Pot

with 6mm x 32mm round spindle. 5mm Spacing PCB pins

£4.75

(inc VAT £5.70)
Quantity

High Definition 5 Megapixel CCTV System with 4 Night Vision Cameras (2 Bullet cameras, 2 Dome cameras)

DEALF42M

Super High Definition 4 Camera 5 Megapixel Night & Day Black Eyeball Dome CCTV System

All our systems are bespoke; they are not pre-boxed kits. You can select any mix of our cameras. Just phone  020 8452 0161.

  •  5MP gives stunning & detailed colour evidence 
  •  Free and easy mobile access using UNV-Link app - NO SUBSCRIPTION REQUIRED
  •  Free in-store and UK phone support
  •  Advanced motion detection technology 
    •   Plug-and-play system; no complex set-up procedures

Cameras are suitable for indoor & outdoor use. All cameras have 20M night vision.

Features:
*  Realtime live & recorded Images
*  Easy to use user-friendly interface
*  Push notifications
*  View live on PCs, laptops, iPhones, android phones and tablets

*  5 Megapixel high definition eyeball dome cameras
*  Supplied with 1TB HDD, with option for 2TB, 4TB, 6TB or 8TB


Contents of Package:
2 CEM20W 5.0 Megapixel colour white eyeball dome cameras
2 UAC-B125-AF28LM 5 Megapixel colour bullet cameras
1  Uniview XVR301-04G3 High Definition 5MP 4 Channel DVR

1 12V 2A power supply
1 4 way DC power splitter

1 100M drums of shotgun RG59 + power cable
1 HDMI lead for DVR to monitor
4 Easyfit twist on BNC plugs
4 Power plugs & sockets (screw-fit)
HD monitor available as an option


XVR datasheet
 

Hard Drive Selection Guide
The following times are based on high quality recordings.
These times can be greatly extended by changing recording quality settings or by using motion detection/timed recording.

4 cameras at 5MP:

1TB: 7 days
2TB: 14 days
4TB: 28 days
6TB: 42 days
8TB: 56 days

4 cameras at 1080p:

1TB: 10 days
2TB: 21 days
4TB: 42 days
6TB: 63 days
8TB: 86 days

£369.00

£285.00

(inc VAT £342.00) 23% Off
Quantity

NUX Analog Chorus Pedal

NAC1

Reissue Analog Chorus Pedal

 

Reissue series vintage chorus pedal for guitar or bass. The chorus effect produces a ringing modulation which gives the impression of multiple guitars playing in unison with a slight detuning to broaden the sound. Vintage style analog circuitry uses BBD chips to deliver a warm tone, reminiscent of many classic guitar tracks from the 1980's and is still as relevant today. A perfect introduction for newcomers to the chorus effect or even for the experienced analog purists.

  • Pure analog "bucket-brigade" circuitry
  • True bypass hardware switching
  • Width, Speed & Blend controls
     

Dimensions: 121 x 77 x 47mm
Input Impedance: 1M Ohm
Output Impedance: 10k Ohms
Controls: Width, Speed, Blend, Footswitch
Power Supply: 9V DC (300mA) center-negative

£44.00

(inc VAT £52.80)
Quantity

NUX Analog Delay Pedal

NAD1

Reissue Analog Delay Pedal

Reissue series vintage delay pedal for guitar or bass. The delay effect records the guitar input and plays it back as multiple repeats, creating an echo effect. Vintage style analog circuitry uses BBD chips to deliver a warm tone, reminiscent of many classic guitar tracks from the 1980's and offers a less harsh and clinical tone than many modern digital delay units. A perfect introduction for newcomers to the delay effect or even for the experienced analog purists.

  • Pure analog "bucket-brigade" circuitry
  • True bypass hardware switching
  • Delay Time, Repeat & Blend controls

Dimensions: 121 x 77 x 47mm
Input Impedance: 1M Ohm
Output Impedance: 10k Ohms
Controls: Delay Time, Repeat, Blend, Footswitch
Power Supply: 9V DC (300mA) center-negative

£44.00

(inc VAT £52.80)
Quantity

NUX Brownie Distortion Pedal

NDS1

 

NUX Brownie Distortion Pedal

 

Shopping for a British distortion pedal? Try the NUX Brownie! The Classical British rock tones of the 1970’s, packed into one little box. How it works? By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You’ll be amazed to hear the warm, organic tone that’s reproduced. Brownie has a specially designed BJT input stage causing it to “break-up” when the preamp tube starts to distort. It also has an asymmetrical clipping circuit letting you simulate some of the characteristics of an actual tube amplifier. It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted. NUX Brownie uses a low-pass tone control filter to simulate the Variac effect (by lowering the voltage going into the amplifier) for rounding-off your tone. The range of tone is controlled yet perfect for dialing-in the high-end response. The power clipping circuit is crafted from a modern low-noise op-amp and 2 red LEDs. It can create symmetrical clipping that distorts both halves of the signal keeping the sound smooth. True bypass circuits with a high quality TPDP mechanical foot-switch gives the bypass its phenomenal signal clarity.

 

Rotary gain, level & tone controls

True bypass

Luminous glow-knobs for dark-stage environments

Strong and lightweight aluminium die-cast chassis

Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied)

£39.00

(inc VAT £46.80)
Quantity

NUX Horseman Overdrive Pedal

NOD1

Horseman Overdrive Pedal

One of the most sought-after dual overdrive and boost pedals produced in the mid '90s is now available in a pocket size pedal. The Horseman pays homage to the legendary Centaur pedal. There are 3 dials for primary settings and 2 modes: Gold and Silver, and it offers massive headroom which usually requires an 18v input. Boutique transparent overdrive at a pocket money price.

  • Switchable gold and silver modes
  • High headroom for clean boost
  • Accurate emulation of the ultimate classic
  • Selectable true or buffered bypass

Dimensions: 94 x 53 x 51mm
Input Impedance: 1M Ohm
Output Impedance: 10k Ohms
Controls: Treble, Gain, Output, Footswitch
Power Supply: 9V DC (90mA) center-negative

£56.00

(inc VAT £67.20)
Quantity

NUX Mighty Lite MK.II Modelling Guitar Amplifier with Bluetooth

NUXML2

Mighty Lite BT mkII Amplifier

 

Mighty Lite BT now reaches the mkII generation with this reinvented model, adding new features, modes and computer editing to an already winning formula, bringing a world of sonic possibilities to the guitar player in a compact and convenient package. Keeping with the desktop form factor and powered by 6 x AA batteries or optional 9V adaptor, the mkII adds a USB type-C port which can connect to a PC or Mac computer to edit settings using the Mighty Editor software. In addition, the Bluetooth connection enables wireless editing via the Mighty Amp app. Both software and app are free to download from www.nuxefx.com. Mighty Lite BT mkII also supports audio streaming over Bluetooth for backing tracks and a built-in drum machine for solo practice. New features include effects, modulations and new amp models with an IR loader for flexible cabinet simulation, which can be programmed and stored into 7 internal presets. This new version offers a huge pallete of tones in a manageable and versatile package for bedroom practice, project studios and travelling guitar players.

  • Bluetooth audio streaming and preset editing
  • USB type-C port for PC/Mac editing and firmware
  • Mighty Editor™ software and Mighty App™ free to download
  • Inbuilt drum machine and metronome
  • Digitally modeled effects, modulations, delay and reverb
  • Selectable amp models, cabinet IR loader and acoustic IRs
  • 5 Watt speaker
  • Runs from 9Vdc power adapter (not supplied) or USB via power bank or 6 AA Batteries
  • Power supply:9Vdc (6 x AA battery or optional adaptor) or USB-C (185mA)
  • Power in:9Vdc, 120mA (5.5 x 2.1mm DC jack pin negative)
  • Inputs:Guitar in (6.3mm jack), Aux in (3.5mm jack)
  • PC Com port:USB type-C
  • Speaker:75mmØ (3") 5W, 4 Ohm
    • Weight:720g
    • Dimensions:166 x 124 x 98mm
       

£85.00

(inc VAT £102.00)
Quantity

Polyester Capacitor Kit 100 Pieces 10nF-470nF

CPEK100

Eiechip 100-Piece Polyester Capacitor Kit in a Handy Carrying Case. Most Common Values.

This capacitor kit comes with 10 different capacitor values. Suitable for projects, servicing & hobby.

10 pieces per value of the following:

10nF, 22nF, 33nF, 39nF, 47nF, 100nF, 150nF, 220nF, 330nF, 470nF

 
 

£13.50

(inc VAT £16.20)
Quantity

PT10A10K

PT10A10K
Vertical Preset Carbon Small Dustproof, 5 x 2.5mm spacing 10Kohms

£0.50

(inc VAT £0.60)
Quantity

PT10A22K

PT10A22K
Vertical Preset Carbon Small Dustproof, 5 x 2.5mm spacing 22Kohms

£0.50

(inc VAT £0.60)
Quantity

PT10A47K

PT10A47K
Vertical Preset Carbon Small Dustproof, 5 x 2.5mm spacing 47Kohms

£0.50

(inc VAT £0.60)
Quantity

PT15A10K

PT15A10K
Vertical Preset Carbon Dustproof, 10 x 5mm spacing 10Kohms

£1.00

(inc VAT £1.20)
Quantity

PT15A22K

PT15A22K

Vertical Preset Carbon Dustproof, 10 x 5mm spacing 22Kohms 

22K is no longer made so please use 25K instead PT15A25K

£1.00

(inc VAT £1.20)
Quantity OUT OF STOCK

PT15A25K

PT15A25K

Vertical Preset Carbon Dustproof, 10 x 5mm spacing 25Kohms 

£1.00

(inc VAT £1.20)
Quantity
Page of 460