Search Results

Neon Indicator 220-240V AC Round Red 10mm cut-out. 42mm length

Red Neon Indicator 220-240V AC. Round Crystal Diamond face. 

Complete with nut. 10mm cut-out. 40mm length

Similar to some valve amplidiers inc Fender, Vox etc.

Red Neon Indicator 220-240V AC. Square Face 

Complete with nut. 7mm cut-out. 34.5mm length

Super Bright Orange 3mm Water Clear LED. 600nm, 1250mcd. Vf = 2.0-2.4V. If 30mA max

Ultra High Brightness Orange 5mm Water Clear LED. 605nm, 4200mcd. Vf = 2.0-2.4V. If 50mA max

16mm diameter Dual Control Pot with knurled & Slotted 6mm dia spindle. PCB Pins 5mm spacing. 100K Log

20mm Shaft

19mm 3/4 Watt 22 Turn Cermet Preset, End Adjust. 50K ohms

9.5mm 20 Turn Precision Cermet Preset Top adjust. 20K ohms

Pure Orange 5mm Diffused LED 30mcd.610nm, 50mA max VF-2.5V max

RAT-in-a-CAN Distortion Effect Kit

A distortion unit based on the legendary Pro Co RAT pedal from 1978. 

  We decided to make a RAT clone to rival the original “Pro Co RAT” and the best way to do this is to use the original Op Amp that gives the RAT its unique sound, the LM308. As we have some original LM308 ICs from the 70’s in our stocks we figured we could do it and do it well. There is a small difference in the fact that the original Pro Co RAT used the LM308N (8 Pin Plastic package) and we had the LM308H (8 Pin Metal can). The 2 chips are identical in how they work and sound but they look different, we decided to celebrate this difference in our design and so the “RAT in a Can” was born. 

   Unlike other modern clones that use “similar” Op Amps that can often sound a bit muddy and bass heavy, the RAT in a Can will give you gut-wrenching harsh fuzz and an astronomically high gain, this pedal is sure to make your guitar scream like a pack of angry rats.

  We hope you have as much fun building and using the RAT in a Can as we did designing and naming it.

Included in the kit

Set of 4 castor wheels with 200kg Loading Capacity, Non-Marking

• HEAVY DUTY: This 4-piece swivel castor set has 2 heavy duty braked and 2 unbraked 75mm (3″) castors with a 50kg per wheel load capacity (Max. 200kg)
• DUAL BRAKING: The wheels rotate 360° and have a dual braking mechanism to lock the wheel and swivel simultaneously
• NON-MARKING: The PVC castor wheels won’t mark surfaces and are ideal for moving furniture, toolboxes and storage containers

Ultra High Brightness Green 3mm Water Clear LED. 525nm, 8400mcd. Vf = 3.3-3.8V. If 30mA max

 VU Audio Level Display Kit

Simple LM3914-based VU display kit with 10 segment LED display and input trim potentiometer. The resistors included in the kit make it a 0V-1.4V display 

• Instructions x 1
• 100Ω Carbon Resistor x 1
• 4.7kΩ Carbon Resstor x 1
• 10k Trim Potentiometer
• LM3914 (this kit can be also used with LM3915 and LM3916)
• 10-Segment Bar Display
• 20 pin IC socket (to be used with the display)
• PCB x 1

Technical Specifications:

Input Voltage: 5VDC
Signal Range: 0V-1.4V

Monacor - Super High Definition Bipolar Audio Axial Capacitor

Extra Low Loss Polypropylene Film 8.2uF 250V ±5% Tolerance

Size 20x45mm

Log Control Pot 24mm with 6mm x 42mm round spindle with flat part 10K Log 20%

ALCAP High Quality Audio Bipolar Capacitor

Reversible Electrolytic Axial Capacitor

Excellent for Crossover Units & Filters

120uF 50V. 10% Tolerance. 4700mA Ripple Current. Dimensions D18 x L38mm

16mm diameter Dual Control Pot with knurled & Slotted 6mm dia spindle. PCB Pins 5mm spacing. 500K Log

20mm Shaft

7.2V 550 mA Krypton Torch Lamp. 11 x 30mm.

7.2V 700 mA Krypton Torch Lamp. 11 x 30mm.

Log Control Pot 24mm with 6mm x 42mm round spindle with flat part 47K Log 20%

1.25A. 32mm Glass Anti Surge Fuse. In pack of 10.

10M Brown PVC Insulated Stranded 18 Strands of Pure Copper, 1x0.14mm

Log Control Pot 24mm with 6mm x 42mm round spindle with flat part 100K Log 20%

220pf Surface-mount 0805 ceramic capacitor 50V 5%.

Sold in packs of 10.

Set of 6 Mono 6.3mm (1/4 inch) Jack Plug Patch-leads

Each Lead is 300mm Long, High Quality, Soft  & Flexible Screened Cable.

Colours: Red, White, Green, Yellow, Black, Blue

Metallised Polypropylene Film. 2000VDC 700VAC FKP1/MKP375 or equivalent. 22.5mm pitch. 6.2nF (6200pF)

127pc Heat Shrink  Assortment in a Component Box

Contents

2.0 x 40mm 30pcs

2.5 x 40mm 25pcs 

3.5 x 4.0mm 20pcs

5.0 x 40mm 25pcs

7.0 x 80mm 16pcs

10.0 x 80mm 8pcs

13 x 85mm 8pcs

Guitar Fuzz Effects Pedal Kit with Authentic Newmarket Germanium Transistors

This kit is based on the legendary fuzz face pedal. Instead of ultra rare germanium transistors, it uses new old stock Newmarket PNP germanium transistors to give you that classic germanium fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building. A schematic and layout diagram will be provided with the kit.
 

The following components are included in this kit:

• Circuit Layout Diagram + Schematic x 1
• Volume (500kΩ LOG) and fuzz (5kΩ LIN) potentiometers x 1 each
• NKT128 Transistors x 2
• CPB10N Boxpoly 10nF Capacitor x 1
• 2.2µF Electrolytic Capacitor x 1
• 22µF Electrolytic Capacitor x 1
• 330Ω Metal Film Resistor x 1
• 33kΩ Metal Film Resistor x 1
• 100kΩ Metal Film Resistor x 1
• 8.2kΩ Metal Film Resistor x 1 
• 6.3mm (1/4") Open Jack Socket x 2
• PP3 9V Battery Snap x 1
• DPDT Latching Footswitch x 1
• 9x25 Stripboard x 1

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (optional - only needed if you want to use an enclosure)

Linear Control Potentiometer 100k Logarithmic Low Noise 20%

32 x 6mm round spindle

5mm pin spacing