Search Results

9 Way Euroblock (Phoenix-type) male terminal connector

Pitch: 3.81mm

Max Current 8A.

Max Voltage 300V

Wire Gauge: 16-28 AWG 

9 Way Euroblock (Phoenix-type) female PCB mount connector

Pitch: 5.08mm

Max Current 10A.

Max Voltage 300V

9 Way Euroblock (Phoenix-type) male terminal connector

Pitch: 5.08mm

Max Current 10A.

Max Voltage 300V

Wire Gauge: 12-24 AWG 

127pc Heat Shrink  Assortment in a Component Box

Contents

2.0 x 40mm 30pcs

2.5 x 40mm 25pcs 

3.5 x 4.0mm 20pcs

5.0 x 40mm 25pcs

7.0 x 80mm 16pcs

10.0 x 80mm 8pcs

13 x 85mm 8pcs

Guitar Fuzz Effects Pedal Kit with Authentic Newmarket Germanium Transistors

This kit is based on the legendary fuzz face pedal. Instead of ultra rare germanium transistors, it uses new old stock Newmarket PNP germanium transistors to give you that classic germanium fuzz, while keeping the cost down. This project is ideal if you're looking to get into guitar pedal building. A schematic and layout diagram will be provided with the kit.
 

The following components are included in this kit:

• Circuit Layout Diagram + Schematic x 1
• Volume (500kΩ LOG) and fuzz (5kΩ LIN) potentiometers x 1 each
• NKT128 Transistors x 2
• CPB10N Boxpoly 10nF Capacitor x 1
• 2.2µF Electrolytic Capacitor x 1
• 22µF Electrolytic Capacitor x 1
• 330Ω Metal Film Resistor x 1
• 33kΩ Metal Film Resistor x 1
• 100kΩ Metal Film Resistor x 1
• 8.2kΩ Metal Film Resistor x 1 
• 6.3mm (1/4") Open Jack Socket x 2
• PP3 9V Battery Snap x 1
• DPDT Latching Footswitch x 1
• 9x25 Stripboard x 1

To assemble this kit, you will need the following tools:

• Soldering iron and solder
• Side cutters
• Track cutter
• Drill (optional - only needed if you want to use an enclosure)

Linear Control Potentiometer 100k Logarithmic Low Noise 20%

32 x 6mm round spindle

5mm pin spacing

9.5mm 20 Turn Precision Cermet Preset Top adjust. 50K ohms

Strengthened Flexible Crocodile Test leads - Set of 10

Metallised Polypropylene Film. 2000VDC 700VAC FKP1/MKP375 or equivalent. 22.5mm pitch. 6.8nF(6800pF)

16mm diameter Dual Control Pot with knurled & Slotted 6mm dia spindle. PCB Pins 5mm spacing. 1M Log

20mm Shaft

ALCAP High Quality Audio Bipolar Capacitor

Reversible Electrolytic Axial Capacitor

Excellent for Crossover Units & Filters

470uF 50V. 10% Tolerance. 8600mA Ripple Current. Dimensions D18 x L44mm

Log Control Pot 24mm with 6mm x 30mm round spindle with flat part 4.7K Log 20%

DPOX180H 180MHz Dual Channel Digital Phosphor Oscilloscope with Function Generator

The DPOX180H is a small but mighty portable digital phosphor oscilloscope (DPO) with a bandwidth of 180MHz and high sampling rate of 500MS/s. Fully featured with a 2.8" IPS digital fluorescent display, 3000mAh Li-ion batttery, 50000wfm/s waveform refresh rate and 20MHz DDS function generator. All the benefits of a modern digital storage oscilloscope combined with the added benefits of an analogue oscilloscope display.

Package Contents:

1 * DPOX180H Digital Phosphor Oscillograph
2 * Matching 200MHz Probe (1X & 10X)
1 * 5V2A Power Adapter
1 * USB Data Line
1 * User Manual (English and Chinese)

Specifications:

Number of channels 2
Analog bandwidth 180MHZ
Maximum sampling rate 500MSPS
Input coupling DC/AC
Rise time 2.5nS
Storage depth 120Kpts
Input impedance 1MΩ-18PF
Vertical sensitivity 5mV ~ 10V(1X)
Time base range 5nS ~ 50S
DC accuracy ±2%
Time accuracy ±0.01%
Measurement range 40mV ~ 80V(1X)
Digital phosphor technolog support
Color temperature display support
Zoom scaling time base support
20M hardware bandwidth limitation support
Adjustable automatic bandwidth limitation support
X-Y mode support
FFT support
Cursor measurement Frequency/Period/Amplitude
Trigger detection Digital trigger
Trigger mode Auto/Single/Normal
Trigger edge Rising/Falling
Roll mode support
Screenshot storage 90
Waveform storage 250 groups
Capture signal 500
Parameter measurement 12 kinds
Signal generator 14 standard function signals
Auto-adjustment support
Waveform manager support
Waveform output support
High-voltageburnout protection support
Screen size 2.8 inches
Screen resolution 320x240
Display technology IPS full view
Expansion interface USB transmission interface
Auto power-off 5minutes-2hours
Firmware upgrade support
Charging requirements 5V 2A
Battery capacityï 3000mAh
Standby time 3.5 hours at full charge
Dimensions 135mmx90mmx40mm

Philips/Mullard "Beehive" Airspaced Trimmer, Antique, New & Unused 2-6.8pF

Flat Section Rubber Drive Belt 106 x 0.7 x 6mm

HIGH PRECISION OSCILLOSCOPE PROBE (X1 X10)
with BNC to Switchable probe + croc-clip.
A super quality 60MHz oscilloscope probe with switchable x1 and x10 input ratios.

*  Max input voltage is 600V peak or 200VAC (rms)
*  1.2m of lead with BNC connector

Lamp Holder for MES (E10) 11mm Screw Lamps

Adaptor form Phono (RCA) Socket (Female) to 6.3mm Mono Jack Plug (male).

Gold Plated Solid Metal with Right Angle entry.

RG213/U 10.4mm Coaxial Cable for RF Transmission per Metre. Max length 50M
50 Ohms coaxial cable. Plain copper conductor and braided screen with solid PE insulation.
7/0.75mm, 192/0.18mm, 10.4mm outer diameter. Black Sheath

Complete 100M Drums also available - please go to ZR67H

Lead joining 2 6.3mm (1/4") Jacks to 2 x 3 pin XLR Female Line Sockets (Latching) using High Quality Screened Cable 1.5M Long

A durable, high quality, shielded audio lead with pro quality, die-cast XLR female connectors and 6.3mm mono jack plugs, offering exceptional sound and reliability. Made with twinned high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.

• Length: 1.5m
• Cable diameter: Twin 5mmØ (5 x 10mm)
• Conductors: 2 x 12 strand, 0.1mmØ pure copper
• Connectors: 2 x female XLR, 2 x 6.3mm mono jack plug

1.6A. 32mm Glass Anti Surge Fuse. In pack of 10.

10 Way Euroblock (Phoenix-type) female PCB mount connector

Pitch: 3.81mm

Max Current 8A.

Max Voltage 300V

10 Way Euroblock (Phoenix-type) male terminal connector

Pitch: 3.81mm

Max Current 8A.

Max Voltage 300V

Wire Gauge: 16-28 AWG 

10 Way Euroblock (Phoenix-type) female PCB mount connector

Pitch: 5.08mm

Max Current 10A.

Max Voltage 300V

10 Way Euroblock (Phoenix-type) male terminal connector

Pitch: 5.08mm

Max Current 10A.

Max Voltage 300V

Wire Gauge: 12-24 AWG 

16mm Single Control Pot with knurled & Slotted 6mm dia spindle. 5K Log

PCB Pins 5mm spacing. 

Spindle length 20mm

Lead joining 6.3mm (1/4") Jacks to 2 x 3 pin XLR Female Line Sockets (Latching) using High Quality Screened Cable 3M Long

A durable, high quality, shielded audio lead with pro quality, die-cast XLR female connectors and 6.3mm mono jack plugs, offering exceptional sound and reliability. Made with twinned high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.

• Length: 3m
• Cable diameter: Twin 5mmØ (5 x 10mm)
• Conductors: 2 x 12 strand, 0.1mmØ pure copper
• Connectors: 2 x female XLR, 2 x 6.3mm mono jack plug

330pf Surface-mount 0805 ceramic capacitor 50V 5%.

Sold in packs of 10.

5600pF, 5.6nF, 0.0056uF Boxed Polyester Film Capacitor 5mm Pitch 63VDC 5% Tolerance