0
£0.00
Search Results
Over 13000 results found
Displaying results 6931 - 6960.
EM84 Magic Eye VU Meter Valve Tube
EM84
|
Magic Eye "VU". B9A Base Small 9-Pin Valve / Tube Good Quality Assured |
£14.50
(inc VAT £17.40)
EPS8266 WiFi Module 2.4GHz for Arduino with Serial Connection ESP-01
ESP01
|
2.4GHz Serial WiFi Module for Arduino and other IOT or Microcontroller projects
The popular ESP8266 microchip with full function WiFi plus it's own microcontroller.
Can be used to add WiFi to your microcontroller project or programmed directly from the Arduino IDE to work independently.
It should NOT be powered from 5V or be directly connected to the digital connections on an Arduino item, as this can damage the module.
Supplied with a pre-soldered 8 way header.
Voltage : 1.7-3.5VDC
Frequency : 2.4GHz
Wireless Standard : 802.11 b/g/n
Dimensions : 14mm x 25mm
|
£3.25
(inc VAT £3.90)
EPS8266 WiFi Module 2.4GHz for Arduino with Serial Connection ESP-12F
ESP12F
2.4GHz Serial WiFi module for Arduino and other IOT or microcontroller projects
This module uses the popular ESP8266 microchip with full function WiFi as well as its own microcontroller. This module can be used to add WiFi to your microntroler project or can be programed directly from the arduino IDE to work independently. This module also has a built in regulator so it can be powered directly from 5VDC. Supplied with 8 way header.
Voltage : 5VDC
Frequency : 2.4GHz
Wireless Standard : 802.11 b/g/n
Dmensions : 24mm x 46mm
|
£7.50
(inc VAT £9.00)
ESP01 WiFi Relay SPDT
RMWF
ESP01 WiFi relay module for Arduino and other microcontroller projects
This module allows you to control a SPDT (single pole, double throw) relay over WiFi. The ESP01 module (included) is compatible with many microcontrollers (inc. Arduino) and can also be used stand-alone.
Supply Voltage : 5VDC
AC Switch ratings : 250V 10A
DC Switch ratings : 30V 10A
Size 37.2 x 25.2mm
|
£4.50
(inc VAT £5.40)
Ethanol Alcohol Gas Sensor Module for Arduino MQ-3
MQ3
Alcahol Ethanol sensor module for Arduino and other microcontroller projects
A sensitive ethanol sensor will detect levels of alcahol in the air. The level of alcohol varies the output voltage. A comparator gives a digital output. When the ethanol level reaches a certain level, this can be set with the built in potentiometer.
Please note: this sensor needs to run for 24-48 hours before first time use
Voltage : 5VDC
Current : 300mA
Sensitivity : 0.4mg/L alcohol
Size 32x21mm
|
£2.50
(inc VAT £3.00)
Extra Bright Blue LED 5mm 2000mcd
B5E
|
Blue 5mm Clear Extra Bright LED. 2000mcd VF=3.4V 465-470nM.
Nice and bright at a nice price!
|
£0.25
(inc VAT £0.30)
Extra-Heavy Duty 8.8mm Studio Speaker Cable per Metre
ZL72
|
Professional Heavy Duty 2 core 8mm dia Speaker Cable. Price per continuous length per metre, cut from the drum.
For Studio, PA and Musicians
Stranded conductors with red and black inner insulation and overall black PVC sheath. Red and black sleeved conductors.
Please go to ZL72H for coplete 100m drums
Specifications:
CSA 2.01mm
Strands 79 x 0.8mm
Outer Diameter 8mm
Max Current 25 Amps Sheath: Black For use with Low impedance (eg 4ohm, 8ohm, 16ohm etc) & 100V Line Speakers |
£2.25
(inc VAT £2.70)
£0.85
£0.65
(inc VAT £0.78) 24% Off
F Female to Coaxial Male (TV Aerial) Adaptor
FXP
|
Adaptor: F Socket (Female) to Coaxial Plug (Male TV Aerial Plug). Nickel Plated |
£1.00
(inc VAT £1.20)
£1.25
(inc VAT £1.50)
F Plug for CT6 / RG61 Satellite Cable
FP06T
|
F Plug Quick Fit Twist for RG61/CT6 6.4-6.5mm (Satellite) Cable. |
£0.25
(inc VAT £0.30)
£9.75
(inc VAT £11.70)
£5.00
(inc VAT £6.00)
Fast & Easy Screw Fit BNC Plug with Gold Pin
BXM
|
Fast & Easy Screw Terminal, High Quality Nickel Plated BNC Plug with Gold Pin Gold Plated Pin Terminals marked: + Internal Pin - Shield (Screen) |
£0.85
£0.65
(inc VAT £0.78) 24% Off
Fast USB Car Charger with Quick Charge and Power Delivery
UC3
Fast USB Car Charger - QC & PD 38W
Simultaneously charge two devices in your vehicle with this 38W dual port car charger. This charger features one USB-A port and one USB-C port with both possessing fast charging technology. The 20W USB-C PD port will charge your iPhone 8 or later with 50% battery in approximately 30 minutes, and fast charge other PD supported devices. The 18W USB-A port will fast charge any QC 3.0 compatible device.
Features PD and QC 3.0 fast charging technology
Dual USB ports
0–50% charge in 30 minutes
Compact and lightweight design
Power Input: 12/24V DC
USB-A Output: 5V @ 3A, 9V @ 2A, 12V @ 1.5A, 18W Max.
USB-C Output: 5V @ 3A, 9V @ 2.22A, 12V @ 1.67A, 20W Max.
Max. total power output: 38W
Dimensions: 63 x 25 x 25mm
|
£6.50
(inc VAT £7.80)
£18.00
(inc VAT £21.60)
FDPF20N50 Transistor
FDPF20N50
|
NMOS F220 N Channel MOSFET 500V 20A 38.5W 0R23. Please go to nearest equivalent STF21NM60ND |
Figure of 8 Mains Chassis/Panel Line Male C8
CP801
|
C8 Figure 8 type Panel/Chassis 2 pin Male. 220-250VAC 2.5A. Fit C7 line Socket (eg our RL813 Lead) |
£2.50
(inc VAT £3.00)
Finger heartbeat measuring sensor module for Arduino KY-039
KY039
Finger heartbeat measuring sensor module for Arduino and other microcontroller projects
This module uses a bright IR LED and a phototransistor. When a finger is placed between the LED and transistor you will get an analogue output of light intensity that passes through the finger, this will vary every time the heart beats and indicate heart rate.
Voltage : 5VDC
Size 19x15mm
|
£2.50
(inc VAT £3.00)
Flame Sensor module for Arduino KY-026
KY026
Flame sensor module for Arduino and other microcontroller projects
This module uses a photo diode that is sensitive to IR between 760-1100nM so it can detect the light of a flame.
It also has a comparator to give a digital output as well as an analogue output and a potentiometer to adjust the level for the digital output.
Voltage : 5VDC
Size 36x16mm
|
£2.50
(inc VAT £3.00)
